The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

wanted speedometer spline for 55-56 dodge or plymouth
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
jerrybev
Posted 2018-04-29 6:27 AM (#562461)
Subject: wanted speedometer spline for 55-56 dodge or plymouth


Elite Veteran

Posts: 688
500100252525
Location: Winston Salem, N.C.
hi
I need a 16 spline, speedometer drive pinion gear. Leads, referrals appreciated. my car is a 56 plymouth
thank you
Jerry Whitfield
winston salem N.C.
Top of the page Bottom of the page
56D500boy
Posted 2018-04-29 10:51 AM (#562466 - in reply to #562461)
Subject: RE: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
Need to know what the transmission is Jerry. 3 spd manual or 2 spd PowerFlite.

Manual 16 pinion is 652 846

Powerflite 16 pinion is 1559 394

Don't forget to drop the space when searching the internet, i.e. 652846 and 1559394.

REFERENCE: http://www.jholst.net/55-58-parts-manual/transmission.pdf

Top of the page Bottom of the page
jerrybev
Posted 2018-04-29 12:09 PM (#562471 - in reply to #562461)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth


Elite Veteran

Posts: 688
500100252525
Location: Winston Salem, N.C.
it has a 1958 318" with automatic tramsmission
thank you
Top of the page Bottom of the page
56D500boy
Posted 2018-04-29 6:32 PM (#562484 - in reply to #562471)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
jerrybev - 2018-04-29 12:09 PM

it has a 1958 318" with automatic transmission


Okay, getting closer. There were two automatics available in 1958 Plymouths, 2 spd Powerflite and the 3 spd Torqueflite. Which one do you have?

(Might make a difference in the part you need).


Top of the page Bottom of the page
jerrybev
Posted 2018-04-30 11:50 AM (#562532 - in reply to #562484)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth


Elite Veteran

Posts: 688
500100252525
Location: Winston Salem, N.C.
hi
thank you,
it has 3 speed torqueflite transmission. Again, 1958 318" and automatic transmission, both of which came from the same car.
thanks
jerry
Top of the page Bottom of the page
56D500boy
Posted 2018-04-30 12:31 PM (#562534 - in reply to #562532)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
jerrybev - 2018-04-30 11:50 AM
it has 3 speed torqueflite transmission. Again, 1958 318" and automatic transmission, both of which came from the same car.
thanks jerry


It would help to know what the read axel ratio and tire sizes in that car were. That said, I only see on 16 tooth pinion: PN 1732 113

Might look like this:



Apparently fatsco might have what you need - if you call them.

https://www.fatsco.net/index.html

REFERENCE: http://www.forwardlook.net/forums/forums/thread-view.asp?tid=35304



Edited by 56D500boy 2018-04-30 12:32 PM




(TorqueFliteSpeedometerPinionPNs.jpg)



Attachments
----------------
Attachments TorqueFliteSpeedometerPinionPNs.jpg (193KB - 48 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2018-04-30 1:42 PM (#562538 - in reply to #562461)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
How many teeth are on the drive gear? I need to adjust the speedo for my 2.76 gears and need to figure out which gear I need with my tires.
Top of the page Bottom of the page
56D500boy
Posted 2018-04-30 3:06 PM (#562539 - in reply to #562538)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
Powerflite - 2018-04-30 1:42 PM
How many teeth are on the drive gear? I need to adjust the speedo for my 2.76 gears and need to figure out which gear I need with my tires.


I could only find speedometer "gear" and "pinion" combos for the standard transmissions. "Gear" seemed to be "6 teeth" for them.

If you can find the 3 spd torqueflite speedometer "gear" in this diagram by number, then I can go from the number to the section, to the PN.





(TorqueFlitePartsDiagram.jpg)



(TorqueFlitePartsList_Sections.jpg)



Attachments
----------------
Attachments TorqueFlitePartsDiagram.jpg (191KB - 70 downloads)
Attachments TorqueFlitePartsList_Sections.jpg (196KB - 69 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2018-04-30 3:18 PM (#562542 - in reply to #562461)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I think it is cut into the output shaft, number 13.
Top of the page Bottom of the page
56D500boy
Posted 2018-04-30 5:39 PM (#562552 - in reply to #562542)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
Powerflite - 2018-04-30 3:18 PM
I think it is cut into the output shaft, number 13.


So not a separate part. Item 13 leads to Section 21-05-1 which calls out the 57-58 torqueflite output shaft as 1736 471 with "8 T" (eight teeth?).






(TorqueFliteOutputShaftPN1736471.jpg)



Attachments
----------------
Attachments TorqueFliteOutputShaftPN1736471.jpg (170KB - 54 downloads)
Top of the page Bottom of the page
jerrybev
Posted 2018-05-02 8:26 PM (#562703 - in reply to #562538)
Subject: Re: wanted speedometer spline for 55-56 dodge or plymouth


Elite Veteran

Posts: 688
500100252525
Location: Winston Salem, N.C.
hite transmission I have has 18. I need 16.
jerry
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)