|
|
Veteran
Posts: 112
Location: lafayette,La. | I want to remove the brake pedal pin to get at the brake push rod. I am wondering if I am missing something. I have the hair pin out of one side of the pin and I can flex both side of the yoke but I can not drive the pin out. Is there something else holding the pin in???Thanks Jerry
(19.JPG)
Attachments ---------------- 19.JPG (28KB - 140 downloads)
|
|
|
|
Expert 5K+
Posts: 6500
Location: Newark, Texas (Fort Worth) | friction. whack it once. Or spray some liquid wrench on it go eat lunch and see if it moves.
Edited by mstrug 2018-05-04 12:15 PM
|
|
|
|
Veteran
Posts: 112
Location: lafayette,La. | I was able to unscrew the rod and get it out but no luck with the other part. I did spray and wacked it no movement. I try and spray it and let it set over night. Thanks Jerry |
|
|
|
Extreme Veteran
Posts: 580
| See if you can get vice grips or a small pipe wrench on the big end and try to turn it clockwise/counter clockwise. |
|
|