The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Just pulling your leg
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
wizard
Posted 2021-01-28 1:57 PM (#608291)
Subject: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		.



(20210125_134214_rez.jpg)



(20210125_134223-rez.jpg)



Attachments
----------------
Attachments 20210125_134214_rez.jpg (215KB - 219 downloads)
Attachments 20210125_134223-rez.jpg (198KB - 213 downloads)
Top of the page Bottom of the page
60 Imp
Posted 2021-01-28 4:40 PM (#608295 - in reply to #608291)
Subject: RE: Just pulling your leg


2000100050025
Location: North Australia		OK, I'll bite......what special tool are you making now Wiz?
Top of the page Bottom of the page
60 Imp
Posted 2021-01-28 4:41 PM (#608296 - in reply to #608295)
Subject: RE: Just pulling your leg


2000100050025
Location: North Australia		Pitman arm puller?
Top of the page Bottom of the page
wizard
Posted 2021-01-29 1:05 AM (#608306 - in reply to #608291)
Subject: Re: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		Yep, more photos today
Top of the page Bottom of the page
wizard
Posted 2021-01-29 9:10 AM (#608316 - in reply to #608291)
Subject: Re: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		My version of the C3646 Pitman arm puller made of 355 construction steel and partly a fubar puller.



(20210125_134234-rez.jpg)



Attachments
----------------
Attachments 20210125_134234-rez.jpg (202KB - 210 downloads)
Top of the page Bottom of the page
wizard
Posted 2021-01-29 9:28 AM (#608318 - in reply to #608291)
Subject: Re: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		All parts were heated up to 200º C (392º F) before TIG welding. Then the puller has been cured and media blasted.

Most probably the original puller was made by Miller.

The function is smooth and very nice. I pre-heated the Pitman arm with my induction heater to 70º C, mounted my puller and the Pitman arm came off with just a couple of turns of the bolt.

The Pitman arm has never been demounted before so it had more than 60 years to rest and rust - still no match for the proper tool




(C3646_0-rez.jpg)



(C3646_1-rez.jpg)



(C3646_2-rez.jpg)



(C3646_3-rez.jpg)



(C3646_4-rez.jpg)



Attachments
----------------
Attachments C3646_0-rez.jpg (132KB - 210 downloads)
Attachments C3646_1-rez.jpg (115KB - 211 downloads)
Attachments C3646_2-rez.jpg (233KB - 218 downloads)
Attachments C3646_3-rez.jpg (163KB - 213 downloads)
Attachments C3646_4-rez.jpg (168KB - 213 downloads)
Top of the page Bottom of the page
wizard
Posted 2021-01-29 9:35 AM (#608319 - in reply to #608291)
Subject: Re: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		Heres some of my special tools.



(Board of tools-rez.jpg)



Attachments
----------------
Attachments Board of tools-rez.jpg (221KB - 210 downloads)
Top of the page Bottom of the page
wizard
Posted 2021-01-29 9:36 AM (#608320 - in reply to #608291)
Subject: Re: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		And these two friends still works like a dream after all the years.



(Sun-rez.jpg)



Attachments
----------------
Attachments Sun-rez.jpg (148KB - 215 downloads)
Top of the page Bottom of the page
22mafeja
Posted 2021-01-30 3:07 AM (#608349 - in reply to #608319)
Subject: Re: Just pulling your leg


Elite Veteran

Posts: 649
50010025
Location: Finland		That`s a tool wall to be proud of Sven! The pitman arm puller looks to be ever lasting...
Top of the page Bottom of the page
58coupe
Posted 2021-01-30 12:52 PM (#608368 - in reply to #608291)
Subject: Re: Just pulling your leg



Expert

Posts: 1740
100050010010025
Location: Alaska		I am familiar with some of your tools but not the long bar with rectangular hole, what is that used for?
Top of the page Bottom of the page
wizard
Posted 2021-01-30 3:53 PM (#608375 - in reply to #608291)
Subject: Re: Just pulling your leg



Board Moderator & Exner Expert 10K+

Posts: 13045
500050002000100025
Location: Southern Sweden - Sturkö island		Thanks' guys. the long bar with the rectangle is for to hold the yoke on the differential when loosening or tighten the nut.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)