The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1957 DeSoto Power Steering pump
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
JGC403
Posted 2019-03-16 6:13 PM (#579434)
Subject: 1957 DeSoto Power Steering pump


Regular

Posts: 57
2525
Location: GREENEVILLE, TN
Can anyone tell me what pump I have?

The car has been sitting for around 10 years without being run. Power steering reservoir is just about empty and the bottom of the pump is wet with fluid. Does anyone rebuild these?

Edited by JGC403 2019-03-16 6:21 PM




(DeSoto Power Steering Pump.jpg)



Attachments
----------------
Attachments DeSoto Power Steering Pump.jpg (49KB - 331 downloads)
Top of the page Bottom of the page
FINS!
Posted 2019-04-13 3:29 PM (#580828 - in reply to #579434)
Subject: RE: 1957 DeSoto Power Steering pump


Elite Veteran

Posts: 943
50010010010010025
Looks like it might be the Vickers type. I ordered a rebuilt one for my '57 Dodge through Rock Auto. They are rebuilt by Lares Corp.
Top of the page Bottom of the page
ToMopar
Posted 2019-04-14 8:45 AM (#580852 - in reply to #579434)
Subject: Re: 1957 DeSoto Power Steering pump



Elite Veteran

Posts: 1153
10001002525
Location: D-70199 Heslach
You have pump #1826158



(1756.jpg)



(1759y.jpg)



(1760n.jpg)



Attachments
----------------
Attachments 1756.jpg (130KB - 315 downloads)
Attachments 1759y.jpg (154KB - 301 downloads)
Attachments 1760n.jpg (145KB - 304 downloads)
Top of the page Bottom of the page
Icy '58
Posted 2019-07-02 5:43 PM (#584358 - in reply to #579434)
Subject: Re: 1957 DeSoto Power Steering pump



Member

Posts: 42
25
Location: LuleƄ, Sweden
When a pump like this getting bad pressure on idle when the engine is hot. No leakage.
What is it that is worn? the rebuild kits seem only to have gaskets.

My steering fluid was very bad and I am changeing it now. But could it bee anything more in the pump that is bad?

Top of the page Bottom of the page
56D500boy
Posted 2019-07-02 8:46 PM (#584364 - in reply to #580852)
Subject: Re: 1957 DeSoto Power Steering pump



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
ToMopar - 2019-04-14 5:45 AM
You have pump #1826158


Thanks for posting that number. I was able to chase it in the 55-58 Mopar Parts Catalogue pdf and then find the 1672 697 Eaton pump that is on my 56 Dodge (driven by the back-side of the generator).

Hope I don't derail the thread. (I've posted diagrams for both my 1672 697 Eaton pump and the 1826 158 Vickers so not to mess up the thread too much).



Edited by 56D500boy 2019-07-02 8:48 PM




(55-58PowerSteeringPumpPNs.jpg)



(1826158PowerSteeringPumpExplodedPartsDiagram.jpg)



(1672697PowerSteeringPumpExplodedPartsDiagram.jpg)



Attachments
----------------
Attachments 55-58PowerSteeringPumpPNs.jpg (208KB - 286 downloads)
Attachments 1826158PowerSteeringPumpExplodedPartsDiagram.jpg (146KB - 286 downloads)
Attachments 1672697PowerSteeringPumpExplodedPartsDiagram.jpg (159KB - 298 downloads)
Top of the page Bottom of the page
Icy '58
Posted 2019-08-06 7:00 AM (#585694 - in reply to #584358)
Subject: Re: 1957 DeSoto Power Steering pump



Member

Posts: 42
25
Location: LuleƄ, Sweden
Icy '58 - 2019-07-02 11:43 PM

When a pump like this getting bad pressure on idle when the engine is hot. No leakage.
What is it that is worn? the rebuild kits seem only to have gaskets.

My steering fluid was very bad and I am changeing it now. But could it bee anything more in the pump that is bad?



No difference with new fluid. Still bad pressure in idle when turning the wheel and hot engine.

Could it be better if I buy a kit for the pump and change everything included?
Top of the page Bottom of the page
22mafeja
Posted 2019-10-23 8:06 AM (#589154 - in reply to #585694)
Subject: Re: 1957 DeSoto Power Steering pump


Elite Veteran

Posts: 640
50010025
Location: Finland
Are you sure the pump is the issue? I would check the pressure by just loosening the return hose or the valve bolts. It should of course leak heavily at once.
If it does leak out you have to put in a o-ring and piston ring kit in the gear unit. These kits you can probably get from any us car parts dealer in Sweden or from ebay.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)