The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Help needed console parts 300G
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
matt
Posted 2019-12-27 2:26 AM (#592069)
Subject: Help needed console parts 300G


Veteran

Posts: 143
10025
Location: Malmberget, Sweden
Can anyone measure the joint peace in the console for me


The F and G are the same.
Top of the page Bottom of the page
matt
Posted 2019-12-27 8:38 AM (#592081 - in reply to #592069)
Subject: Re: Help needed console parts 300G


Veteran

Posts: 143
10025
Location: Malmberget, Sweden
If anyone have a pic of the joint bit it would help.
Top of the page Bottom of the page
NicksGarage
Posted 2019-12-27 10:15 AM (#592083 - in reply to #592069)
Subject: RE: Help needed console parts 300G



Expert

Posts: 1223
1000100100
Location: Ramona, CA
It's about 3 3/8" long. I can probably find a picture of the back side.





(console_trim_joint.jpg)



Attachments
----------------
Attachments console_trim_joint.jpg (78KB - 134 downloads)
Top of the page Bottom of the page
matt
Posted 2019-12-27 3:54 PM (#592093 - in reply to #592069)
Subject: Re: Help needed console parts 300G


Veteran

Posts: 143
10025
Location: Malmberget, Sweden
Thanx Nick. My car is in winter storage 150km from me
What the width of the part?
And what is the real name of that part?



Top of the page Bottom of the page
NicksGarage
Posted 2019-12-27 6:11 PM (#592103 - in reply to #592069)
Subject: RE: Help needed console parts 300G



Expert

Posts: 1223
1000100100
Location: Ramona, CA
I'm not sure what the actual name of the part is. The parts book isn't much help. This is from the 1961 book.





(61_console_parts.png)



Attachments
----------------
Attachments 61_console_parts.png (21KB - 130 downloads)
Top of the page Bottom of the page
Mr. Bob
Posted 2019-12-28 5:39 PM (#592149 - in reply to #592069)
Subject: RE: Help needed console parts 300G


Regular

Posts: 66
2525
Location: Ferndale, WA 98248
I have a pair of these that will go in my car when I finally do the interior this spring. I can't see a part number on them. They are indeed exactly 3 3/8 inches long. And 1 3/4" across. You can see their contour in the end view photo below. Each bend is about 1/4" from the side. The high bend on the left is 9/16" of the table top, the low bend on the right is 7/16" off the surface.

The shop working on my car is called Heavy Metal Custom Shop, because they can fabricate almost anything from metal. If you'd like, I can take one of my pieces to them and get an estimate on how much it would cost for them to fabricate a pair of these for you. They would also have my front and rear consoles to test fit them to. Getting the inner clips just right will probably be the most difficult (expensive) part of the job.



(300G console trim - end view.jpg)



(300G console trim - end view 2.jpg)



(300G console trim - back side.jpg)



(300G console trim - inside clips.jpg)



Attachments
----------------
Attachments 300G console trim - end view.jpg (171KB - 139 downloads)
Attachments 300G console trim - end view 2.jpg (123KB - 150 downloads)
Attachments 300G console trim - back side.jpg (139KB - 136 downloads)
Attachments 300G console trim - inside clips.jpg (117KB - 138 downloads)
Top of the page Bottom of the page
NicksGarage
Posted 2019-12-28 7:06 PM (#592150 - in reply to #592069)
Subject: Re: Help needed console parts 300G



Expert

Posts: 1223
1000100100
Location: Ramona, CA
Great pictures, saves me digging up mine. It looks like those tabs were part of a continuous extrusion that they ground off the excess.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)