The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Change of carpet 60 Chrysler
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
wizard
Posted 2007-12-14 7:18 AM (#107095)
Subject: Change of carpet 60 Chrysler



Board Moderator & Exner Expert 10K+

Posts: 12448
50005000200010010010010025
Location: Southern Sweden - Sturkö island		Here is some tips on how to make pre-sewn carpets fit just a little nicer.
The bags contains slightly wet sand and the carpet is spray-glued to the felt, left overnight for to set good.
As you can see it was real crappy in the before photo

I hope that someone will get some help from this.

Edited by wizard 2007-12-14 7:25 AM




(Resize of IMG_2056.jpg)



(Resize of IMG_2074.jpg)



(Resize of IMG_2200.jpg)



(Resize of IMG_2203.jpg)



(Resize of IMG_2219.jpg)



(Resize of IMG_2221.jpg)



Attachments
----------------
Attachments Resize of IMG_2056.jpg (129KB - 151 downloads)
Attachments Resize of IMG_2074.jpg (85KB - 154 downloads)
Attachments Resize of IMG_2200.jpg (82KB - 157 downloads)
Attachments Resize of IMG_2203.jpg (74KB - 165 downloads)
Attachments Resize of IMG_2219.jpg (169KB - 192 downloads)
Attachments Resize of IMG_2221.jpg (160KB - 146 downloads)
Top of the page Bottom of the page
NewportBob
Posted 2007-12-14 9:15 AM (#107105 - in reply to #107095)
Subject: Re: Change of carpet 60 Chrysler



Regular

Posts: 97
252525
Location: Sioux Center, IA		What a good idea! Dumb question, but how thick is the felt: mine is so crumbled I can't tell. Can I get what I need at a carpet store? Or is there a better source (I've got the carpet, courtesy of Gary Goers).

Thanks,
Bob
Top of the page Bottom of the page
wizard
Posted 2007-12-14 10:33 AM (#107113 - in reply to #107105)
Subject: Re: Change of carpet 60 Chrysler



Board Moderator & Exner Expert 10K+

Posts: 12448
50005000200010010010010025
Location: Southern Sweden - Sturkö island		There is no stupid questions, Bob - only stupid answers, as we say here in Sweden.
You could use a felt for upholstery, width about a yard and 0,400 something in thickness.
Try your local upholstery shop (also for furniture's) they should have it.



(Resize of IMG_2265.jpg)



Attachments
----------------
Attachments Resize of IMG_2265.jpg (87KB - 140 downloads)
Top of the page Bottom of the page
57plymouth
Posted 2007-12-14 11:26 AM (#107117 - in reply to #107095)
Subject: Re: Change of carpet 60 Chrysler



Expert

Posts: 3523
20001000500
Location: Blythewood, SC		That's a freakin' great idea!
Top of the page Bottom of the page
TailFinGary
Posted 2007-12-15 11:26 AM (#107253 - in reply to #107095)
Subject: RE: Change of carpet 60 Chrysler



Veteran

Posts: 129
10025
Location: Canton, MI		Sven, this is great! I will be doing the exact same thing this winter (hopefully) on my 60 New Yorker. My carpet is good but it is the cut pile carpeting which I think is supposed to be loop pile as shown in your pictures. By the way, you can ignore my question about carpet type in your posting under Members Rides.

Gary
Top of the page Bottom of the page
wizard
Posted 2007-12-16 4:12 PM (#107383 - in reply to #107253)
Subject: RE: Change of carpet 60 Chrysler



Board Moderator & Exner Expert 10K+

Posts: 12448
50005000200010010010010025
Location: Southern Sweden - Sturkö island		Did you see that I managed to save the original foot plate rubber TailFinGary! Try to separate yours (if nice) with a carpet knife cutting only the carpet/glue side. After that you have cleaned the back from glue residue, you can cut small holes and sew it onto the new carpet. The plastic crap that was supplied together with my carpet, I will save and show as an exemplary of bad quality and taste.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)