The Forward Look Network | ||
| ||
1958 Plymouth Door Sill Moldings Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Wanted - All Wanted Ads | Message format |
1958Paul |
| ||
Veteran Posts: 166 Location: Nebraska | I am still looking for two nice door sill moldings - 1958 Plymouth Belvedere 2 door hardtop - please e-mail me if you have some nice ones without corrosion or anything. savoy1@cox.net Thanks!! | ||
FURY |
| ||
Elite Veteran Posts: 1049 Location: Auckland, New Zealand. | Paul. I tried looking for a long time for some good used ones, they simply are not out there. And with these cars' habit of rusting floors, finding sill plates with edges that are not gone, where they touch the wet carpet, is near impossible. There is a guy in New Jersey who reproduces these, by hand. SILL PLATES,REPRO,US$200 PAIR, Don Kuehn, 81 Graham Street, North Haledon, NJ 07508, Tele: 973-423-1196 Like a lot of things that are hand made, you may have to wait a little for them, but he turned them around for me in less than a month, and packaged them exceptionally well. It's just a little ma and pa operation. His workmanship is excellent, you could not restore used plates to look this good. Be patient with him though, I know someone who wasn't, and Don told him where to go... Good luck, and tell him Glenn from New Zealand sent ya! Glenn. 57 Fury. (Sill plates-57 Ply-NJ reproes-Paxos1.jpg) (Sill plates-57 Ply-NJ repros-Paxos2.jpg) (Sill plates-57 Ply-NJ repros-Paxos3.jpg) (Sill plates-57 Ply-NJ repros-Paxos4.jpg) Attachments ---------------- Sill plates-57 Ply-NJ reproes-Paxos1.jpg (44KB - 348 downloads) Sill plates-57 Ply-NJ repros-Paxos2.jpg (22KB - 289 downloads) Sill plates-57 Ply-NJ repros-Paxos3.jpg (42KB - 291 downloads) Sill plates-57 Ply-NJ repros-Paxos4.jpg (25KB - 291 downloads) | ||
1958Paul |
| ||
Veteran Posts: 166 Location: Nebraska | Glenn, Thank you so much for this information! I do truly appreciate it! These, like many of the pieces on our beloveds, are like Hen's teeth! Plus - it is always great to support the small businessman! You've made my 2009 already!! | ||
FURY |
| ||
Elite Veteran Posts: 1049 Location: Auckland, New Zealand. | Paul. No problem, my pleasure. I like to always support local USA workers too. Lucky there is not much, if any asian rubbish being reproduced for our rare cars I say! ...now if I could only find myself a car amplifier made in USA for my Fury... Glenn. | ||
FURY |
| ||
Elite Veteran Posts: 1049 Location: Auckland, New Zealand. | Here is a picture of these sill plates now on my Fury. They are as close to assembly line in detail as you could ever hope for. Support this small ma and pa operation, and Buy US Made. Be tolerant when you call them on the phone, I have heard they got upset at someone I put onto them, because they called after hours.... Glenn. (Fury-57-Barratt-15-2-09-interior, sill plate2-email.jpg) (Fury-57-Barratt-15-2-09-interior, sill plate-email.jpg) Attachments ---------------- Fury-57-Barratt-15-2-09-interior, sill plate2-email.jpg (229KB - 326 downloads) Fury-57-Barratt-15-2-09-interior, sill plate-email.jpg (204KB - 326 downloads) | ||
chrysler300c |
| ||
Expert ,, George Passed away July 28th 2021, He will be Missed Posts: 1295 Location: Twin Falls, Idaho | I bought a pair for my 56 Fury and they are awesome... well worth the 6 month wait! George | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | I tried to call them at least a dozen time in the last 3 years. And I never got an answer ! Nobody picked up the phone ... EDIT : Well I tried again right after this post ... And I got an answer ! My order is now at last under way ... Edited by Chrome58 2013-01-29 2:34 PM | ||
Dualquad58 |
| ||
New User Posts: 1 | Hi ! .. Are there still somebody out there who makes reproduction of 57 58 Plymouth sill plates ...or am I out to late...? Thanks Steffen. | ||
tailfins |
| ||
Expert Posts: 1782 Location: calif | what do they cost? | ||
mstrug |
| ||
Expert 5K+ Posts: 6500 Location: Newark, Texas (Fort Worth) | tailfins - 2021-02-04 10:44 AM what do they cost? Paul. I tried looking for a long time for some good used ones, they simply are not out there. And with these cars' habit of rusting floors, finding sill plates with edges that are not gone, where they touch the wet carpet, is near impossible. There is a guy in New Jersey who reproduces these, by hand. SILL PLATES,REPRO,US$200 PAIR, Don Kuehn, 81 Graham Street, North Haledon, NJ 07508, Tele: 973-423-1196 Like a lot of things that are hand made, you may have to wait a little for them, but he turned them around for me in less than a month, and packaged them exceptionally well. It's just a little ma and pa operation. His workmanship is excellent, you could not restore used plates to look this good. Be patient with him though, I know someone who wasn't, and Don told him where to go... Good luck, and tell him Glenn from New Zealand sent ya! Glenn. 57 Fury. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |