![]() | ||
The Forward Look Network | ||
| ||
![]() Jump to page : < ... 60 61 62 63 64 65 66 > Now viewing page 66 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General Discussion | Message format |
56D500boy![]() |
| ||
Expert 5K+ Posts: 8469 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Lower Mainland BC | . Not very exciting but yesterday and today I cleaned (wire brushes in my cordless drill, wire brush (big), wire brush (small brass)) and painted (Krylon "Fusion" all-in-one Satin Black) my 56 Dodge's rear leaf springs. They were looking rather ratty and have been bugging me for at least 4 years but they were not a priority. Finally got to them yesterday (left) and today (right). The paint seems good and it dries very quickly. By eye, I thought that I did a good job. From the photo, it looks like I need to address a few areas with a bit more paint. ![]() Regardless, they are much better than they were two days ago. ![]() Found the PN on one of the springs: 1636 859 which translates as 55-56 Dodge V8 "Std., except Sub (urban)., Cv. Cp (convertible)" so not D500 (I knew that already 5 leaf not 6 leaf D500). I also got all 8 of the U-bolt nuts started with the help of MOOVIT and a 21" breaker bar. I didn't twist off the threaded portion of the U-bolt (I was watching carefully). Removing, cleaning and painting the U-bolts and nuts will be the next project to be put off to the future. ![]() Edited by 56D500boy 2021-08-07 9:53 PM (56Dodge5leafRearSpringAfterCleaningAndPainting_PN_1636859_Left.jpg) (56Dodge5leafRearSpringAfterCleaningAndPainting_PN_1636859_Right.jpg) Attachments ---------------- ![]() ![]() | ||
| |||
Viper Guy![]() |
| ||
Expert Posts: 1807 ![]() ![]() ![]() ![]() ![]() Location: Branson, MO | During this cold, snowy, and blustery day, I decided to take pictures of my recently acquired (Christmas present from my son and wife) '59 1/24 promo scale model that matches the color of my real '59 Firedome 2HT. The colors actually match fairly well and I've never seen a model molded and painted in these colors before. (59 DeSoto Model LF.jpg) (59 DeSoto Model RR.jpg) (59 DeSoto RF New.JPG) Attachments ---------------- ![]() ![]() ![]() | ||
| |||
Viper Guy![]() |
| ||
Expert Posts: 1807 ![]() ![]() ![]() ![]() ![]() Location: Branson, MO | Fortunately I was able to obtain a reproduction D E S O T O trunk mat and installed it today and with a little bit of trimming it turned out really nice. (thumbnail.jpg) (IMG_3344 (1).jpg) (IMG_3345.jpg) Attachments ---------------- ![]() ![]() ![]() | ||
| |||
57plymouth![]() |
| ||
Expert Posts: 3551 ![]() ![]() ![]() ![]() ![]() Location: Blythewood, SC | Who makes repop trunk mats? | ||
| |||
Viper Guy![]() |
| ||
Expert Posts: 1807 ![]() ![]() ![]() ![]() ![]() Location: Branson, MO | No one makes these anymore. I was lucky to find the last one. | ||
| |||
57burb![]() |
| ||
Expert Posts: 3879 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: DFW, TX | Bill Adams (can be found on FB) worked to get the '57/58 trunk mat reproduced nicely in 2019. I'm not sure what availability is for these today. (78052316_10220428322927509_3790123491269804032_n.jpg) (75625294_10220428335487823_7244569101941604352_n.jpg) Attachments ---------------- ![]() ![]() | ||
| |||
Viper Guy![]() |
| ||
Expert Posts: 1807 ![]() ![]() ![]() ![]() ![]() Location: Branson, MO | Bill was my source. I was lucky to obtain the last one and was told no more were going to be produced. | ||
| |||
JedRhule![]() |
| ||
Member Posts: 29 ![]() Location: Palm Beach County Florida | While waiting for a local machine shop to design an adapter that will connect my 56 Dodge P/S pump to a modern alternator, I took this opportunity to clean and paint the top of the engine. | ||
| |||
NicksGarage![]() |
| ||
Elite Veteran Posts: 1122 ![]() ![]() Location: Ramona, CA | Finally gave up trying to start my 1960 wagon that has been sitting since 1978. So this past weekend I had to move it out of my shop so I could work on my 300F and other projects. First opportunity to put the two cars together to take pictures. The wagon will just have to wait until I can yank the engine out and redo it. The 300F is getting its new bumpers, new starter and new tires. (1960_x2_01a.jpg) (1960_x2_02a.jpg) (1960_x2_03a.jpg) (1960_x2_04a.jpg) Attachments ---------------- ![]() ![]() ![]() ![]() | ||
| |||
Jump to page : < ... 60 61 62 63 64 65 66 > Now viewing page 66 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |