The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Cross ram linkage, reproduced here
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
sonoramicconvert
Posted 2012-02-13 12:38 PM (#307649)
Subject: Cross ram linkage, reproduced here


Veteran

Posts: 249
10010025
needed some linkages made, so I had some extras made to sell. they look great and fit great. comes with nuts/washers/pins. I'll have the bell crank made in the next few weeks if anyone needs it too.
I wasnt able to locate a good source for the snap-clip on the carb end yet. If anyone knows where to get 100quanity of 1/4" clips RH, please let me know. Thanks!

57.00 for set of 2

Edited by sonoramicconvert 2012-02-13 12:47 PM




(parts 009 (Medium).jpg)



(parts 010 (Medium).jpg)



(parts 011 (Medium).jpg)



(parts 012 (Medium).jpg)



Attachments
----------------
Attachments parts 009 (Medium).jpg (54KB - 158 downloads)
Attachments parts 010 (Medium).jpg (42KB - 126 downloads)
Attachments parts 011 (Medium).jpg (38KB - 148 downloads)
Attachments parts 012 (Medium).jpg (39KB - 151 downloads)
Top of the page Bottom of the page
sonoramicconvert
Posted 2012-07-31 3:31 PM (#332536 - in reply to #307649)
Subject: RE: Cross ram linkage, reproduced here


Veteran

Posts: 249
10010025
I still have some available. Been selling a few sets here and there. so far everyone says they are happy with them.
I'm supposed to be getting the bell cranks made soon.
Top of the page Bottom of the page
sonoramicconvert
Posted 2013-12-08 5:38 PM (#415169 - in reply to #332536)
Subject: RE: Cross ram linkage, reproduced here


Veteran

Posts: 249
10010025
Update on long ram linkage... rods and slides are still 57.00/pair and the center crank is 175.00 Anybody needing one or both of these just let me know. Shipping in lower 48 has been about 12.00 Thanks!
Top of the page Bottom of the page
Flamin.J
Posted 2014-06-07 9:50 PM (#444156 - in reply to #307649)
Subject: Re: Cross ram linkage, reproduced here


Regular

Posts: 50
2525
Hi do you have any sets left,i would like to buy one
thanks. J
Top of the page Bottom of the page
sonoramicconvert
Posted 2014-08-20 11:50 AM (#453674 - in reply to #444156)
Subject: Re: Cross ram linkage, reproduced here


Veteran

Posts: 249
10010025
I have one center crank left, I will see about getting more and when. Rods/Slides are still available! I have 11 sets left now, Please let me know if you have any interest. Thanks! sachasl@yahoo.com
Top of the page Bottom of the page
kylie
Posted 2014-10-09 1:24 AM (#458601 - in reply to #453674)
Subject: Re: Cross ram linkage, reproduced here


Regular

Posts: 72
2525
Hi, do you have the underside lever that the pedal linkage attaches to? I have evrything from the crossram to the carbs but missing the lever on the underside. Any help much appreciated as I'm in Australia and struggle to find parts!
Top of the page Bottom of the page
sonoramicconvert
Posted 2014-10-14 5:32 PM (#459223 - in reply to #458601)
Subject: Re: Cross ram linkage, reproduced here


Veteran

Posts: 249
10010025
kylie - 2014-10-09 12:24 AM

Hi, do you have the underside lever that the pedal linkage attaches to? I have evrything from the crossram to the carbs but missing the lever on the underside. Any help much appreciated as I'm in Australia and struggle to find parts!


I do have that piece. I usually sell the whole thing ( swivel with arm ) let me get back to you on a price. Thanks
Top of the page Bottom of the page
sonoramicconvert
Posted 2018-10-07 9:35 PM (#571301 - in reply to #307649)
Subject: Re: Cross ram linkage, reproduced here


Veteran

Posts: 249
10010025
Update... Still have the rods/slides available with correct clips for carbs $65/pair.
Only one center crank left $215
Shipping in lower 48 $15
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)