Viewing a thread - Dodge 1960 bumper rear

You are logged in as a guest. ( logon | register )

Dodge 1960 bumper rear Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Body, Glass, Interior and Trim	Message format

dktoyz

Posted 2012-06-30 9:59 AM (#327792)
Subject: Dodge 1960 bumper rear

Member

Posts: 37

Location: Home of the 500

Are the access rear bumper guards the same for Polara and Dart models? Pardon my ignorance but what is the " common" reference name for those pieces? They look like quad exhaust ports sitting there on top of bumpers. Besides the information asked, I need a pair or two for '60 Matador 2dr hdtp and Polara 4 dr hdtp. Any help with answer and/or actual item is much appreciated. Contact me with PM.

ttotired

Posted 2012-06-30 10:46 AM (#327798 - in reply to #327792)
Subject: Re: Dodge 1960 bumper rear

Expert

Posts: 2573
2000

Location: Perth Australia

In Aus, they are called overiders and are a rather rare option from what I have seen.

I have only found 1 set so far (apart from the set on my car).

My rear bumper and both sets of overiders are at the chromers now and they are going to do the best out of whats there.

Both r/h ones were rusted through, but 1 of the "new" ones I got had a hole about 1cm diameter, my orriginal r/h one was
rusted right along the top.

I have not ever seen these listed in ebay, so if you find them, grab them

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)