The Forward Look Network | ||
| ||
1958 PLYMOUTH UNDER TRUNK LID ANODIZED ALUMINUM TRIM Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> For Sale - PARTS | Message format |
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | Extremely rare and hard to find three piece set of anodized aluminum under trunk lid trim for the 1958 Plymouth Belvedere & Fury, or dress up your Savoy or Plaza. A must have for any decent restoration and/or Christine car! Brand new replacement stock (NRS). Made right here in the USA! Made to match original OEM specs, contour, shape, size and finish! The 2 longer trim pieces measure 25 7/8" each in length. Each has one open end for inserting trim clips, and one finished end with a return. The center cap cover measures 1 1/4", and is drilled for the stainless screw. Trim clips and stainless screw mentioned above are not included. Thanks for looking! I couldn't be any happier about how well these came out! I personally make/add the finished end return to each of the longer pieces, and hand make each 1 1/4" long center cap cover. These trim sets are in stock and ready to ship with no long wait period, but quantities are limited so don't miss out. Satisfaction guaranteed! $199. per set plus $10. for insured priority shipping within the US. PM me with your email address if your interested. Thanks, Ron Edited by phurious 2012-11-26 2:24 PM (CIMG9002c.jpg) (CIMG9003c.jpg) (CIMG9004c.jpg) (CIMG9005c.jpg) (CIMG9006c.jpg) (CIMG9007c.jpg) (CIMG9008c.jpg) (christine (2).jpg) Attachments ---------------- CIMG9002c.jpg (54KB - 171 downloads) CIMG9003c.jpg (57KB - 164 downloads) CIMG9004c.jpg (47KB - 157 downloads) CIMG9005c.jpg (51KB - 175 downloads) CIMG9006c.jpg (45KB - 160 downloads) CIMG9007c.jpg (53KB - 164 downloads) CIMG9008c.jpg (52KB - 154 downloads) christine (2).jpg (47KB - 217 downloads) | ||
mstrug |
| ||
Expert 5K+ Posts: 6487 Location: Newark, Texas (Fort Worth) | My Friend Jerry (58Savoy) in Kennedale got these and Loves them. "Better than new", Perfect. Keep up the good work! Any Sport-tone Inserts in the works? Still need a nice 1958 silver rear drivers side. Marc. | ||
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | mstrug - 2012-12-03 9:54 AM My Friend Jerry (58Savoy) in Kennedale got these and Loves them. "Better than new", Perfect. Keep up the good work! Any Sport-tone Inserts in the works? Still need a nice 1958 silver rear drivers side. Marc. Thanks for letting me know Marc! Feedback left by ebay buyer: "Excellect product!! Thanks very much!!" | ||
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | Here's what's new: Six (6) brand new black coated wire trim clips are included with each set. Edited by phurious 2012-12-10 12:30 PM (CIMG9276c.jpg) (CIMG9277c.jpg) Attachments ---------------- CIMG9276c.jpg (58KB - 144 downloads) CIMG9277c.jpg (54KB - 149 downloads) | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | If you want my opinion (but I'm sure you will not), $199 is a ridiculous amount of money for such a small moulding. We are talking about two small 24" pieces of aluminum, that's all. I know those things are rare to find in good shape, but come on ... $199 ? Really ? I, personnally, need a good set for my car, but frankly, I would not give more than a $100 for the whole set. Edited by Chrome58 2012-12-11 2:30 AM | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | I dont think its that bad really To make up the formers or whatever to produce the stips and then get them anodised in a small production run where you have to outlay all the money up front, with a little for a profit, I say fair go, give the bloke credit for reproducing what is most likely almost impossible to get. Like everything, if you dont like the price, dont buy it. There are a lot of things that I would like, but I think they are asking to much, so I just wait until suitable ones turn up or I do with what I have. Just my 2 cents | ||
Chrome58 |
| ||
Expert Posts: 1316 Location: Belgium, 40 miles south of Brussels | You are right, of course. Maybe I was in a bad mood this morning ... Anyway. | ||
mstrug |
| ||
Expert 5K+ Posts: 6487 Location: Newark, Texas (Fort Worth) | It seems fair; About $200 for used pieces if they know what they have is normal. | ||
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | Chrome58 - 2012-12-11 2:28 AM If you want my opinion (but I'm sure you will not), $199 is a ridiculous amount of money for such a small moulding. We are talking about two small 24" pieces of aluminum, that's all. I know those things are rare to find in good shape, but come on ... $199 ? Really ? I, personnally, need a good set for my car, but frankly, I would not give more than a $100 for the whole set. Your opinion is quite welcome, just know that used sets that have damage (dents, dings, scratches and bends) and still need to be re-anodized usually sell for $150-$200 and don't include the 6 mounting clips. Thanks and good luck! | ||
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | Still for sale on ebay, and under the Forward Look Network tent in July 2013 at Chrysler Carlisle in PA. | ||
Tony88 |
| ||
New User Posts: 1 | Hi I would like a set of those how can I get them what's the eBay item number? | ||
vr440 |
| ||
Member Posts: 5 | do you still have any of these left | ||
christine-lover |
| ||
Expert Posts: 2996 Location: Sept. 1958 | Ron hasn't logged onto here in months, I wonder what's up, haven't talked to him in a while. | ||
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | Hey guys, they are still available. I haven't been active in the online forums lately. Please email me at rciarmello@gmail.com thanks! | ||
60crossram |
| ||
Elite Veteran Posts: 836 Location: Layton, Utah | The price sounds completely fair to me. DeSoto lives!!! | ||
savoy_man |
| ||
Veteran Posts: 191 Location: Nebraska | I was hoping to find this thread again. Are they still available? | ||
phurious |
| ||
Extreme Veteran Posts: 591 Location: West Chester, PA | They are still available. I'll have a few sets ready to ship next week. Thanks! | ||
antonellomopar |
| ||
Extreme Veteran Posts: 375 Location: milano, italy | Price has now increased to $ 249 including shipping to NJ...and no clips are included. At least, they were not included with the moldings I have just purchased. Asked Ron about this matter, but no reply after 5 days I got in touch with him on Messenger. | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | That's getting a bit nuts... I'll take a look at what I can find off the shelf... | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |