The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1957 DeSoto Firedome Convertible - The "Glide"
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Members RidesMessage format
 
Firedome-TX
Posted 2014-06-13 7:18 PM (#445002)
Subject: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Hi,

I bought my 1957 Desoto Firedome Convertible in 1994 after seeing it sitting in a parking lot with the roof collapsed and water standing in the floorboards. She obviously had not seen any care in some time and my first thought was...hey, she holds water...cant be that bad!

After tracking down the owner and coming to an agreement I took her home and back under a shed. Did a quick budget fix on a large number of items and then just drove her happily for many years (without a roof).

It was parked near the university somewhere for a while. A friend of mine gave me a photo from 1990 that he took of it prior to my ownership...it was white with a blue top on it. Blue and white tuck and roll interior.
From what I can tell this car was modified into a mild custom in the early 60's. When I first found her, I chased down the two prior owners, before the guy I bought it from, and they all said it was already modified when they owned it.
(All the work was gas welded and leaded. No bondo)

In 2004, I moved and built a new garage with a space inside just for her.

2006 - started to fix some of the wrongs done to her by and others. Had her media blasted, started to repair the quarters and rust spots....then had some kids. Work stopped again for a bit.

------------------------------------------
What I am hunting for and where we are at on it:

Floors (mostly under the rear seat)
Trunk floor replacement panel
---I have spoken with John (Big M) and Gary (netparts) and they are on the job and checking for me.

recommendations for convertible pump and cylinders supplier?

Who makes a good top upholstery kit?

Eventually will return a 341 back under the hood...but the 361 with dual AFB's is there and it runs right now. So I have a "budget" long term hunt there... Unless someone here has a spare rebuilt 341 they want to find a home for...

Does anyone make a decent replacement wiring harness for a `57 Desoto Firedome Convertible? or do I need to use a "Painless" or equivalent aftermarket kit?

---Spoke with Greg Leggatt regarding his wiring and looks to be just what the doctor ordered...will order once body is better

Reputable supplier for replacement gas tank?

---so far "made in Canada" is the input

Anyhow...that's the story. Thanks for all your input so far & Looking forward to getting to know y'all better!
Top of the page Bottom of the page
Firedome-TX
Posted 2014-06-13 7:29 PM (#445007 - in reply to #445002)
Subject: RE: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Here is the photo from 1990:
 photo 1957DeSotoscan_0002.jpg

Here she is as I found her in `94:
 photo 1957DeSotoscan_0001.jpg

 photo 1957DeSotoscan.jpg

Drove her for a long time:
 photo theGlide.jpg

Then plastic media blasting in 2006 to see what was under there:
 photo DSC01658.jpg

 photo DSC01651.jpg

and back into the garage and into etch primer:
 photo DSC01699.jpg
 photo DSC01720.jpg
Top of the page Bottom of the page
d500neil
Posted 2014-06-13 7:57 PM (#445013 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil!

Posts: 19146
5000500050002000200010025
Location: bishop, ca
First poster: WELCOME aboard, to the thread where your ride deserves to be honored!


Top of the page Bottom of the page
Lancer Mike
Posted 2014-06-14 1:05 AM (#445053 - in reply to #445002)
Subject: RE: 1957 DeSoto Firedome Convertible - The "Glide"



5000200020005001002525
Location: The Mile High City
That is wonderful! Great old pictures and a neat story.
Top of the page Bottom of the page
57Kelii
Posted 2014-06-14 3:58 AM (#445059 - in reply to #445053)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Elite Veteran

Posts: 691
500100252525
Location: Los Angeles, California
Can't wait until Doc says something about this You have a very rare...and very amazing car. Will you restore her back to stock without those 60's bits on it? I'm rather surprised a Firedome ran on wire wheels (they are original ones from what I can tell) Be proud, seems as if every rare car has a funny and interesting story to go with them
Top of the page Bottom of the page
The Chrysler Kid
Posted 2014-06-14 9:33 PM (#445157 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1384
1000100100100252525
Location: Ocala, Florida
Weren't motor wheel wires not available after 56? I guess maybe they could have some left over.
Top of the page Bottom of the page
Doctor DeSoto
Posted 2014-06-14 10:21 PM (#445161 - in reply to #445157)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



5000500050005000200050025
Location: Parts Unknown
Wires were not a FACTORY option after 1956, however stocks remained and they were sold
until used up. I have even seen a 61 Dodge that was sold new with them. Back in the day, they
were rare. Anymore, it seems every flashy Forward Look, particularly the ragtops, are wearing
them.

This is an awesome car. Personally, I LOVE to lo-bux straight-bar side trim as a pleasant option
to the typically over-blinged convertibles. And the 57 Firedome wore it well and was unique in its
OEM possibility to be so equipped.

If I owned this car, it would get the dog dishies I have hanging on my shop wall and a paint color
that is moderately "less flashy" with a black top. I would ride it on whitewalls though. I really dislike
blackwalls on a big body car.




(chrysler-57Windsor.jpg)



Attachments
----------------
Attachments chrysler-57Windsor.jpg (156KB - 427 downloads)
Top of the page Bottom of the page
tnlowrider
Posted 2014-06-15 5:43 PM (#445247 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Extreme Veteran

Posts: 500
500
Location: Upper East Tennessee
Awesome Car! I think I've been in touch with you on the HAMB. You won't go wrong with that Greg Leggatt harness. It fits perfectly!
Top of the page Bottom of the page
d500neil
Posted 2014-06-15 8:04 PM (#445255 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil!

Posts: 19146
5000500050002000200010025
Location: bishop, ca
And for a suitable residence-tract for this car, as per the illustration, above, go see the newest addition in the Forwardlook house thread.



Top of the page Bottom of the page
haspe
Posted 2014-06-16 12:32 AM (#445283 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Veteran

Posts: 113
100
Location: Washington State, the wet side
I have the 341 that you need
Top of the page Bottom of the page
LD3 Greg
Posted 2014-06-16 2:19 AM (#445287 - in reply to #445283)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Expert

Posts: 1906
1000500100100100100
Location: Ontario, Canada
I think he already has the 341. I think the challenge is for me to come up with a harness that fits the " temporary motor" and can later be altered to fit the 341 and do so in an invisible manner!!! Hey, bring it on!! The impossible only takes a bit longer!!!
Greg
Top of the page Bottom of the page
ttotired
Posted 2014-06-16 6:55 AM (#445303 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert 5K+

Posts: 8443
50002000100010010010010025
Location: Perth Australia
Cant make a plug to go on the inside of the firewall Greg?

I think thats how I would tackle it, 2 different engine harnesses that will then plug into the one dash harness

A bit easier on the Aussie cars as it would be behind the glove box (a bit more room), but stil doable on a left hooker

Top of the page Bottom of the page
StillOutThere
Posted 2014-06-16 8:46 AM (#445310 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



2000100010010025
Location: Under the X in Texas
You may recall I saw you drive away from the old original location of the Lone Star Roundup and gave chase until you parked at home where we talked about the car with you making it abundantly clear you would not sell and were about to start some restoration when the garage was complete. So glad to see and hear that was all true and continues progressing. Monotone paint on these '57 Fireflites with the single side trim strip gives a Letter Car flavor to their appearance and looks great. Carry on !

Top of the page Bottom of the page
sidesho_bob1961
Posted 2014-06-16 1:53 PM (#445343 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1728
100050010010025
Location: Fleetwood, Pa
Do you plan to keep the custom "frenched" tail light treatment or eventually go back to stock tail lites?? No judgment....I know it's your car, just curious....
Top of the page Bottom of the page
d500neil
Posted 2014-06-16 3:33 PM (#445350 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil!

Posts: 19146
5000500050002000200010025
Location: bishop, ca
ALSO: you have to determine whether you will install stainless steel inserts in the exhaust tips, and aluminized tail pipes, so that you
can run the exhaust through the OEM exhaust tips, without having any corrosion occur on the tips or bumper areas.

Since you are in Austin, exhaust condensation will not be much of an issue; you can drill a weep hole at the bottom of the exhaust pipe,
where it turns upwards, to the tips, so that any water will not puddle up in that area (but, with the aluminized pipes, any puddling
will not present a corrosion issue).

The Chrysler performance mufflers, Sono-4Xers, have weep holes on their lower rear panels....probably many other mufflers do, too.

Exhaust coming out of those tips is a Kool thing to see!

BTW, aluminized pipes look like OEM steel, and are not very expensive.

I run 2 1/4" o.d. pipes on my car; 2" i.d. .

On this sample piece, I roughed it up (tough to do, even with a file) and submerged the thing in salty water for a week,
to see what would happen...not much did.









Edited by d500neil 2014-06-16 3:45 PM




(PICT4379.JPG)



Attachments
----------------
Attachments PICT4379.JPG (108KB - 442 downloads)
Top of the page Bottom of the page
Firedome-TX
Posted 2014-06-16 6:35 PM (#445365 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Wow. Great bunch of info and thanks for everyones well wishes!

To answer some of the questions:

I am removing the frenched tail light extensions...I do like the original look of the tail lights and at the way they flow into the bumpers. The way these were done just don't work for me.

Yes, eventually I will run the exhaust back through the original tips...but that will go along with a new exhaust system connected to the running 341 (which I do not yet have. Peter, I will send a PM)

I still like the 60's mods such as the mild shave of extra chrome doodads and love the spoke wheels so will be getting a set of repops to go with the wide whites. I will also be running the fender skirts as I just like them...

At this time, a fine metallic light sky blue with a pearl clear overall is the plan. It will be a nod to the blue that she has worn before but mild custom and clean. I want to show off her lines. I like the tuck and roll interior so will get similar redone where needed. She has been a mild custom since she was a young car so I'm not going to restore but also try to make her better than she is now and "do no harm" as the saying goes.

As for the two tone vs the single spear...I have the trim for both and am on the fence until I get further down the path. I can see the beauty in both so, you never know..

And Wayne, I do remember talking with you. Good to hear from you again!

The hunt for parts has begun so will keep everyone posted as progress is made (and as $ allows)

-Clif



Top of the page Bottom of the page
'57ADV
Posted 2015-01-11 1:43 PM (#467276 - in reply to #445350)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Regular

Posts: 89
252525
Hi, I have a '57 Adventurer HT which I'm doing a light restoration on later this year. I was thinking of re-routing the exhausts back up through the bumper tips as original. I have good original exhaust tips inside the chrome bumper tips but was considering having some re made in stainless to avoid corrosion. I noticed in your message you mentioned this and wondered if you knew of a source of these before I go and re-invent the wheel and make some from scratch? Also the bits I have missing are the curved bits of pipe from the main exhaust up to the little flared tips inside the bumper - any ideas where I might find some or even photos/dimensions? My other thought was to maybe put some extra "fins" (like on air cooled cylinders) on the exhaust just before it enters the tips to try to dissipate some heat - I heard that as well as corroding the tips, the heat often melted the plastic tail lights!

This is my first American car and I am in the UK so this forum is brilliant. So great to be able to chat to fellow Forward Look nuts!
Thanks
Mark
Top of the page Bottom of the page
57desoto
Posted 2015-01-11 8:45 PM (#467319 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1488
1000100100100100252525
Location: New Castle PA
Mark, I don't mean to jump in here when you weren't speaking to me, BUT the venturi are tough to make. I had these made (see picture) in stainless a few years ago, but ended up pounding them, cutting them, and mashing them (not very technical terms, but you know what I mean) in order to make them fit in the bumper ends. There's not much room in there for error, and the radius of turn is very sharp. I'm sure a very good metal man CAN reproduce them accurately, but all I'm saying is that there isn't much tolerance for error in the fitment.

As for the actual exhaust pieces that fit into the venturis, I've posted the pictures below before. Of course you can see the originals, and the new ones my local muffler shop made for me. I still have the originals if you need some specific measurements from them...

Edited by 57desoto 2015-01-11 8:50 PM




(venturi2.jpg)



(epetrus_s26a_exhaust_ends.jpg)



(epetrus_s26a_ bumper_venturi.jpg)



Attachments
----------------
Attachments venturi2.jpg (51KB - 424 downloads)
Attachments epetrus_s26a_exhaust_ends.jpg (110KB - 411 downloads)
Attachments epetrus_s26a_ bumper_venturi.jpg (115KB - 430 downloads)
Top of the page Bottom of the page
JT Vincent
Posted 2015-01-12 5:23 PM (#467390 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1493
1000100100100100252525
Location: Jamaica Plain, MA
What a great car. Seems like you are in relatively good shape for parts. I imagine you will need to have the interior made up. I think most convertibles had vinyl seat inserts, etc. Kind of a basket weave type stuff similar to what VW and Porsche used, but distinctive. Maybe a local shop can make some. Door cards aren't too tough if you get the material you like and you have the right stainless. Firedomes had door cards that were much simpler than Fireflites and Adventurers. Just cardboard of a special but easy to obtain type, a plastic water curtain, a layer of felt, and the vinyl of your choice. Most repro interiors are a little different from the original heat-embossed ones.
And Ed, I still think the Firesweeps might've had different front bumpers than the senior models. Although, that doesn't make sense. The jet-intake maw is more gaping on the Sweep, at least mine. I'll post a pic somewhere else. Maybe the folks who redid my bumper un-smushed it so it looks like the opening is wider top-to-bottom.

PS, I like the frenched tail lights, but I'm not a big purest.
Top of the page Bottom of the page
PlymouthFury
Posted 2015-01-12 9:23 PM (#467409 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1324
1000100100100
Location: Hickory, NC
The DeSotos with the exhaust exiting the bumper was always cool to me! I was always curious as to how it was routed. The pictures were helpful!
Top of the page Bottom of the page
d500neil
Posted 2015-01-14 2:28 AM (#467542 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Exner Expert 19,174 posts. Neil passed away 18 Sep 2015. You will be missed, Neil!

Posts: 19146
5000500050002000200010025
Location: bishop, ca
Hey, Clif....it may be a little bit, late, now, but did your vert have blue-painted top bows (to match its blue
convertible top)?

Top of the page Bottom of the page
'57ADV
Posted 2015-01-15 12:09 PM (#467669 - in reply to #467319)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Regular

Posts: 89
252525
Hi Ed, no problem at all butting in, I just saw the thread and thought I'd see what I could find out without troubling you again - but it seems all roads eventually lead back to you as the technical guru!! Wonderful pictures and I can immediately see how difficult these would be to make but I think I will have a go if/when I get around to my "light and sympathetic" restoration of the paintwork and trim - I'm just doing my homework in advance! I'm wondering how on earth to measure and draw out those connecting pieces - they look more complicated than the venturis although maybe a little bit more room for error? I would not want you to go to any major trouble but if you do have some measurements I can use as a base for the connecting pieces that would be great - no hurry though!! The only section I can't figure out at all is how the venturis connect with the connecting pieces - once inside the bumper you can't see. Also, with the shape of that "funnel" like ending which mates with the exhaust tube, I'm guessing that the exhaust tube just sort of "floats" inside that funnel shape to allow for movement? Thanks as always - you are an absolute mine of information!!
Best wishes
Mark
Top of the page Bottom of the page
57desoto
Posted 2015-01-15 9:27 PM (#467746 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1488
1000100100100100252525
Location: New Castle PA
Mark, I've never seen a completely original connection between the main exhaust pipe and the bell-shaped extensions. By the time I became involved with these cars, the original set-ups were long gone. Maybe someone on here knows better than me, but from what I've seen, like in this picture from my own Adventurer before I touched anything, you're right about it "floating" in the funnel.



(exhaust_hookup.jpg)



Attachments
----------------
Attachments exhaust_hookup.jpg (85KB - 407 downloads)
Top of the page Bottom of the page
Doctor DeSoto
Posted 2015-01-15 9:51 PM (#467747 - in reply to #467746)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



5000500050005000200050025
Location: Parts Unknown
Ed,

Your Adventurer undershot shows a correct flare at the bumper end, but the forward
end should have a corresponding "ball" and clamp, ... the "ball" being a bulbous thing
like a lightbulb with the top opened up. This arrangement allowed minor alignment
issues to be more easily twisted into sealable connection in that tight area. It is no
wonder these did not survive beyond original service parts supplies. They are labor
intensive and a PITA !!!
Top of the page Bottom of the page
FIN ME
Posted 2015-01-17 8:57 AM (#467852 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 2788
2000500100100252525
Location: USA - KY

Here are photos from my vintage 1957 Desoto Dealer's Fabric/Paint Sample Book, might be helpful:
.





(PAINTBOOK39.jpg)



(PAINTBOOK38.jpg)



(PAINTBOOK37.jpg)



(PAINTBOOK36.jpg)



(PAINTBOOK35.jpg)



(PAINTBOOK34.jpg)



(PAINTBOOK32.jpg)



(PAINTBOOK33.jpg)



(PAINTBOOK31.jpg)



(PAINTBOOK27.jpg)



(PAINTBOOK26.jpg)



(PAINTBOOK25.jpg)



(PAINTBOOK24.jpg)



(PAINTBOOK23.jpg)



(PAINTBOOK22.jpg)



(PAINTBOOK21.jpg)



(PAINTBOOK20.jpg)



(PAINTBOOK19.jpg)



(PAINTBOOK18.jpg)



(PAINTBOOK55.jpg)



Attachments
----------------
Attachments PAINTBOOK39.jpg (108KB - 420 downloads)
Attachments PAINTBOOK38.jpg (107KB - 408 downloads)
Attachments PAINTBOOK37.jpg (107KB - 443 downloads)
Attachments PAINTBOOK36.jpg (126KB - 428 downloads)
Attachments PAINTBOOK35.jpg (106KB - 430 downloads)
Attachments PAINTBOOK34.jpg (130KB - 411 downloads)
Attachments PAINTBOOK32.jpg (128KB - 408 downloads)
Attachments PAINTBOOK33.jpg (117KB - 434 downloads)
Attachments PAINTBOOK31.jpg (71KB - 415 downloads)
Attachments PAINTBOOK27.jpg (85KB - 406 downloads)
Attachments PAINTBOOK26.jpg (86KB - 416 downloads)
Attachments PAINTBOOK25.jpg (64KB - 412 downloads)
Attachments PAINTBOOK24.jpg (81KB - 434 downloads)
Attachments PAINTBOOK23.jpg (67KB - 405 downloads)
Attachments PAINTBOOK22.jpg (124KB - 422 downloads)
Attachments PAINTBOOK21.jpg (123KB - 428 downloads)
Attachments PAINTBOOK20.jpg (90KB - 405 downloads)
Attachments PAINTBOOK19.jpg (131KB - 413 downloads)
Attachments PAINTBOOK18.jpg (130KB - 402 downloads)
Attachments PAINTBOOK55.jpg (105KB - 411 downloads)
Top of the page Bottom of the page
Firedome-TX
Posted 2015-10-01 4:21 PM (#491130 - in reply to #467852)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Thanks all. Sorry I dropped off...work and kids, I'm sure a bunch of yall are familiar with that.

I have found a decent set of floorboards (thanks John!) and now am waiting to get time (and cooler weather) to deal with that issue.

I can say that (at this time) I am leaning more towards the single body color with the simple trim. I am also still planning on the Greg Leggatt harness. but before I can do any of this fun, I have to get the floors in place.

Top of the page Bottom of the page
tnlowrider
Posted 2015-10-01 4:26 PM (#491131 - in reply to #491130)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Extreme Veteran

Posts: 500
500
Location: Upper East Tennessee
Can't wait to see the progress on this one!
Top of the page Bottom of the page
Firedome-TX
Posted 2015-10-01 6:27 PM (#491133 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
BTW...if anyone runs across any old show photos from the mid 60's with possibly this car in it, or come across anything please let me know. I KNOW, It is a LONGSHOT but the eyes on this board are good at spotting them in a field of Fords and Chevys...thanks!
Top of the page Bottom of the page
cbrayinga
Posted 2015-10-02 12:42 PM (#491191 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Veteran

Posts: 295
100100252525
Location: Tallapoosa, GA

Awesome Car!!! And what a neat story to go with it. Hope she goes together nice and smooooth for you!!
Top of the page Bottom of the page
Firedome-TX
Posted 2016-11-16 4:28 PM (#526409 - in reply to #491191)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Just an update...nothing has happened so far...this growing family does take a lot of spare time off my hands
She is still sitting inside the garage getting dusty and becoming temporary storage (she takes up a lot of space).
I realized the old photos had disappeared so wanted to refresh the links.

http://s76.photobucket.com/user/Firedome-Tx/media/Vehicles/57%20DeS...
This is from before I pulled her apart for plastic media blasting...now still in etch primer and apart.

Edited by Firedome-TX 2016-11-16 4:40 PM




(DSC01485[1].jpg)



Attachments
----------------
Attachments DSC01485[1].jpg (56KB - 374 downloads)
Top of the page Bottom of the page
miquelonbrad
Posted 2016-11-17 12:27 AM (#526452 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 1737
100050010010025
Location: Hay Lakes, Alberta, Canada
Get the kids working on it!!! They need to do their part!
Top of the page Bottom of the page
Firedome-TX
Posted 2017-09-25 3:39 PM (#549144 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Folks,
I'm just not getting around to working on the Glide, and as such am unfortunately starting to think about selling her so that this rebuild would actually happen and be done properly by someone with the time and $ resources to make it happen... I am just not finding the time for it.
I drove her into the garage and to prep for the media blasting, basically removed the seats and door panels, bumpers, side trim, taillights and headlights. I still love this car but just not on my priority list any longer. Kids and family are priority 1.

I also have a 2 dr fireflite hardtop parts car with drivetrain (I was entertaining going the restore route) and full floor pan from a high desert car (Big M) to patch the holes under the seats and trunk.

Trying to get an idea of what she might be worth. Help is appreciated.
Top of the page Bottom of the page
w.weiland
Posted 2017-09-25 5:36 PM (#549151 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Expert

Posts: 1482
1000100100100100252525
Location: Lordstown, Ohio
PM sent
Top of the page Bottom of the page
57DODGECONV
Posted 2017-09-25 6:42 PM (#549154 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Elite Veteran

Posts: 854
5001001001002525
Pm sent
Top of the page Bottom of the page
57burb
Posted 2017-09-26 12:23 PM (#549196 - in reply to #549144)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Expert

Posts: 3966
200010005001001001001002525
Location: DFW, TX
Howdy Clif! Long time no see. This is Danny, the guy in Fort Worth that sold you a red Firedome coupe. Or what was left of it!

Hope you're doing well. I'll send you my phone number in a DM if you want to catch up. I can probably get this car sold for you, but I doubt you'll need any help! :D Talk to you soon,
Danny
Top of the page Bottom of the page
Firedome-TX
Posted 2017-09-26 1:36 PM (#549200 - in reply to #549196)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Hi Danny,

Thanks man. Still deciding on keeping or selling and working through this. I've had her for 20+ years, so kind of a family member in a way. So deciding what is best for all.

Yes, we need to get together and catch up. I still have that coupe/parts car...exactly as it was after selling you the hood and bumper for your NYer project.

-Clif
Top of the page Bottom of the page
Firedome-TX
Posted 2019-03-01 4:16 PM (#578745 - in reply to #549200)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
OK, she needs a new home. I've been wrapped up in a home remodel and with the family and such, simply don't see getting back to her. I'm going to ask $40k as there are only a handful of these left in existence and I am in NO rush to sell. I don't need help selling and plan on using hopefully only the Forward Look site to find the next owner. I don't have any new photos and since it has been a very long while there is a layer of dust on everything. Will take some new photos in the spring if she doesn't sell by then. Comes with a very rusty 2Dr hardtop parts car...if you want it.
Top of the page Bottom of the page
w.weiland
Posted 2019-03-02 7:07 AM (#578759 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"


Expert

Posts: 1482
1000100100100100252525
Location: Lordstown, Ohio
pm sent
Top of the page Bottom of the page
StillOutThere
Posted 2019-03-02 11:34 AM (#578762 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



2000100010010025
Location: Under the X in Texas
April 3, 2005. Remember me following you home from the LSRU?



(Austin1.jpg)



(Austin2.jpg)



Attachments
----------------
Attachments Austin1.jpg (78KB - 303 downloads)
Attachments Austin2.jpg (78KB - 300 downloads)
Top of the page Bottom of the page
Firedome-TX
Posted 2019-03-02 9:41 PM (#578795 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Ha! Yes, and sure doesn’t feel like that was that long ago.
Top of the page Bottom of the page
Firedome-TX
Posted 2020-02-04 4:11 PM (#593803 - in reply to #445002)
Subject: Re: 1957 DeSoto Firedome Convertible - The "Glide"



Member

Posts: 36
25
Location: Austin, TX
Spring is almost here and I have managed to clean all the bike parts, Christmas decor and kids toys off of my Desoto and pushed her out into the sunshine. First time out of the garage since 2006. Took some new photos and will be posting her up for sale on the Forum's "For Sale" area. She needs a new home and someone to get her back on the road. Price will be $35k now. (comes with complete floor from Big M and a 1957 Firedome 2DR Hardtop parts car)

https://photos.app.goo.gl/hBpuskY73tYf7bGDA


Edited by Firedome-TX 2020-02-04 4:26 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)