|
|
Member
Posts: 11
Location: Gualala, CA | I am looking for a pair of front hubs for a 1955-56 dodge sedan. I already have a disc brake conversion from AAJ brakes so I don't need the drums just the hubs. I would greatly appreciate any help on locating these, both of my hubs on my 55 are completely shot.
Thanks much,
Sean |
|
| |
|
Expert 5K+
Posts: 7806
   
Location: Williams California | I have good ones available, but they are sold as a drum/hub assembly. If someone has scored or ruined drums, perhaps they would separate them.
---John |
|
| |
|
Member
Posts: 11
Location: Gualala, CA | How much are you asking? I could try to resell the drums but I mostly don't want to pay for shipping on heavy parts I don't need. Then again Williams isn't that far for me to drive if the price is right. |
|
| |
|
Expert 5K+
Posts: 7806
Location: Williams California | They are $85 apiece, and guaranteed.
---John |
|
| |
|
Regular
Posts: 98
Location: New Jersey | The hubs are part of the drums. Are you looking for Spindles ? |
|
| |
|
Member
Posts: 11
Location: Gualala, CA | Thanks for getting back to me John. Still hoping to get just the hubs. I will get back to you after the holidays if I don't have any luck. To answer Sperduton's question, the hub and the drum are actually two pieces, held together by the lugs. The Plymouths, which I have heard, are different from the Dodges may have a one piece unit, which is odd because so much else is the same for those years.
Thanks again,
Sean
|
|
| |
|
Regular
Posts: 98
Location: New Jersey | Ok, I guess AAJ changed his kit from the one I have on my 56. I didn't need hubs for my conversion. I think I tossed all of my old hubs and drums in the scrap. I'll look on my shelf and see if I haven any left. |
|
| |
1955-56 Dodge front hubs
