|
|
Expert 5K+
Posts: 6487
Location: Newark, Texas (Fort Worth) | My crank shaft 2 groove pulley is for a poly 318 (all one piece with damper). I received a 3 groove from a friend that has 6 holes and no harmonic balancer. So, I owe him an la 318 2 groove crank shaft pulley only, that he needs to fit his chassis. Any one have one? ( I bought an LA318 balancer for my engine.) Thanks! Marc. |
|
|
|
Member
Posts: 35
| I might have something lying around the garage. I'll look later when I get home. I've had dozens of them from core engines, but nothing of mine uses that arrangement. I'm picking up a '72 360 out of a truck next week sometime, and I'm sure that will have the pulley you need on it. If not, I'll grab one from that junkyard when I'm there.
Edited by Tragic Wagon 2015-05-22 11:39 AM
|
|
|
|
Expert 5K+
Posts: 6487
Location: Newark, Texas (Fort Worth) | Thanks Pierre! Marc. |
|
|
|
Expert
Posts: 2119
Location: atlanta | If he doesn't come up with one, lemme know, i have one that's powder coated black and never installed, pay the shipping and it's yourn, yourn is Texas talk, right? it's a 6 hole two groove, from my 61 poly 318. |
|
|
|
Member
Posts: 35
| He needs an LA pulley. I didn't see one in the garage but I'm sure I'll have one Wednesday. |
|
|
|
Member
Posts: 35
| I've got a pulley for you. The inner belt groove is smaller diameter than the outer... will that work? If so, PM me a shipping address and I'll get it out to you. |
|
|