The Forward Look Network | ||
| ||
steel case torque flite required Moderators: Ray Bell Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Local Regions -> Australia & New Zealand Region | Message format |
sonnysgarage |
| ||
Member Posts: 10 | Hi, is there anyone in Australia that has a steel case torque flite they want to sell. I need one for my 57 imperial with factory 392 hemi. Thanks Sonny.0433791112 | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | Australia is a big place Where are you? I have a spare, but I dont want to part with it, but there is a guy thats advertising various parts on gumtree (Perth) in a suburb called Shelly that might have one | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | Just rang him and he doesnt have one Sorry Very rare box here, but someone might have one Whats wrong with yours? | ||
VAN HELSING |
| ||
Elite Veteran Posts: 982 Location: Upper Hunter NSW Australia | .......... .... Yep, as Mick said, VERY rare trans to find down here. I don't have one to spare, nor know of any available but if you have one to rebuild, give " Transwreck" a call in Frankston Victoria. Ph 03 97696647 or 0428 465 483 as they have old transmission rebuild experience and could maybe do yours or might be able to put you in touch with someone down here that might have one? ......... .... | ||
sonnysgarage |
| ||
Member Posts: 10 | thanks Mick for making that enquiry for me, i am in Sydney NSW, Thanks Van Helsing also, i will give them a call and see how i go.My radiator had rusted out internally and filled the tranny with water. Thankfully the engine flushed out pretty well without problems but the transmission needs some major parts replaced. this was how i got the car a couple of years ago and it has been sitting in my shed since. so hoping to get something i can put in to get driving and get my enthusiasm back for this car. | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | You might want to consider trying to get one from the US Most shippers will charge around $400 port to port USA to AUS ships to the east coast from south eastern USA, I have a shipper that ships from Longbeach in California to Fremantle, but the shipping across country here is pretty expencive That said, I have seen these transmissions going for a lot of money (why I wont sell my spare), so it might turn out cheaper to get one from the States Jim Robinson in Clunes (Vic) might have one, but other than that, I am out of ideas Oh, George Laurie in QLD might be another chance (desotogeorge on this site) | ||
ruchaven |
| ||
Expert Posts: 1231 Location: York County, PA | I take it that a cast iron will not do. Do you have a number for the transmission you want. The bolt holes must line up. Catch ya later. | ||
ttotired |
| ||
Expert 5K+ Posts: 8443 Location: Perth Australia | Thats what he is after Very rare trans here and those with a spare one are reluctant to sell | ||
Powerflite |
| ||
Expert 5K+ Posts: 9654 Location: So. Cal | I would think that it would be cheaper to ship hard parts over from the US rather than an entire trans. There are companies that have stock of such things. You could try: http://www.makcotransmissionparts.com And Neil likes these guys: http://www.nwtparts.com/ BigM might have what you need too but I don't know if he would be willing to separate out a trans into parts. | ||
ram300 |
| ||
Extreme Veteran Posts: 363 | I offered a fully rebuilt unit I have coming, never heard back, guess my price was too high. Only when you get involved with rebuilding these cast trans do you realize the value I suppose. | ||
sonnysgarage |
| ||
Member Posts: 10 | Hello everyone and thanks for the input and replies, i have been able to find one that will get me out of trouble, just haven't had a chance to get back on here sooner.Thanks Owen, the price you offered for yours was reasonable, as you say to rebuild one of these trannys is very expensive , and time consuming when hunting for hard parts. Cheers Sonny. | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |