The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Interest in repop dual antennas?
Jump to page : 1 2
Now viewing page 2 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
mikes2nd
Posted 2016-07-17 5:21 PM (#516912 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
I will start a for sale thread when im ready, I have to get them polished up and chromed.
Top of the page Bottom of the page
arizona mopar gold
Posted 2016-07-17 5:50 PM (#516916 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?



Extreme Veteran

Posts: 413
100100100100
Location: Whetstone, Arizona
Pencil me in for a set....my 58 "had" them...following with great interest!!
Top of the page Bottom of the page
Rob
Posted 2016-07-17 6:48 PM (#516925 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Elite Veteran

Posts: 970
5001001001001002525
I'm also interested in a pair.
Top of the page Bottom of the page
mikes2nd
Posted 2016-09-08 11:59 AM (#520773 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
chroming is ready to go, first sets should be heading for chrome in a few weeks.
Top of the page Bottom of the page
mstrug
Posted 2016-09-08 12:31 PM (#520776 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?



Expert 5K+

Posts: 5553
50005002525
Location: Newark, Texas (Fort Worth)
Interested two!
Top of the page Bottom of the page
Vanish
Posted 2016-09-11 9:37 PM (#521022 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Veteran

Posts: 129
10025
Location: A little east of Pittsburgh Pa.
I am interested in a set for my 59 ply
Top of the page Bottom of the page
plumfloored
Posted 2016-09-11 10:19 PM (#521027 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Member

Posts: 46
25
Location: Avondale, AZ
Interests in a pair for a 58 plymouth
Top of the page Bottom of the page
mikes2nd
Posted 2016-11-21 1:39 PM (#526769 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
Had to step aside from polishing but back to polishing sets now... ugh.

I heard Vans is going to repop the channeled down antenna's. I may sell these through Vans also.

I have the standard 60's -70's stainless replacement antennas. Correct length 3 piece with round ball on tip

Top of the page Bottom of the page
di_ch_NY56
Posted 2016-12-13 4:10 PM (#528581 - in reply to #492888)
Subject: RE: Interest in repop dual antennas?



Elite Veteran

Posts: 1179
1000100252525
Location: ZH, Switzerland

Hi Mike

I'm interested in a set for a 1960 Chry/DeS. Thanks.

Dieter

Top of the page Bottom of the page
mikes2nd
Posted 2016-12-13 4:40 PM (#528584 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
im still sanding and polishing, I might run a set to the chromers just for show.
Top of the page Bottom of the page
mikes2nd
Posted 2017-02-13 5:24 PM (#533954 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
okay this is a lot of work





(polishing.jpg)



Attachments
----------------
Attachments polishing.jpg (246KB - 92 downloads)
Top of the page Bottom of the page
di_ch_NY56
Posted 2017-02-18 7:45 AM (#534254 - in reply to #528581)
Subject: RE: Interest in repop dual antennas?



Elite Veteran

Posts: 1179
1000100252525
Location: ZH, Switzerland

di_ch_NY56 - 2016-12-12 10:10 PM

Hi Mike

I'm interested in a set for a 1960 Chry/DeS. Thanks.

Dieter

I'm not interested anymore. Because apparently for 57/58 MoPars. They do not fit a 1960 Chrysler.

 

Happy Restoring!

Dieter

Top of the page Bottom of the page
57plymouth
Posted 2017-03-12 10:04 AM (#535777 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?



Expert

Posts: 3450
200010001001001001002525
Location: Blythewood, SC
I'm interested. I'll even take a set as cast and polish them myself.
Top of the page Bottom of the page
mikes2nd
Posted 2017-03-12 11:22 AM (#535786 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
I was thinking about that, its cold out again so I cant polish.
Top of the page Bottom of the page
56D500boy
Posted 2017-03-19 11:03 PM (#536268 - in reply to #492888)
Subject: Re: http://www.cheapnfljerseyswholesaleoutlet.cc/cheap



Expert

Posts: 3546
2000100050025
Location: Lower Mainland BC
Somebody ban this MF'ker. Annoying Spam Meister deserves to die.
Top of the page Bottom of the page
mikes2nd
Posted 2017-04-15 5:19 PM (#538165 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
okay back to sanding and polishing... The idiot who was machining my part for my headliner told me wait now.. sigh...





(antennas.jpg)



Attachments
----------------
Attachments antennas.jpg (230KB - 76 downloads)
Top of the page Bottom of the page
arizona mopar gold
Posted 2017-04-16 1:12 PM (#538200 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?



Extreme Veteran

Posts: 413
100100100100
Location: Whetstone, Arizona
Mikes2nd,
Have you figured out a price range yet on these?....polished or in the raw?...i may be in for 3 sets
Top of the page Bottom of the page
mikes2nd
Posted 2017-04-16 6:30 PM (#538205 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525

I'm going to be bulk chroming and they are all roughed in now so I'm trying to save some money by getting them all done in bulk.

With the amount of work we are probably looking at 400+$ a set with gaskets, nipples, antennas and antenna mount. I know they were 450$ before but I should be able to be under that. Dennis charged 50$ a mast also? or was the total 550$? They have a different mounting system slightly. I made these so you can drop the antenna if you want to put a car cover on

. It will be wing nutted on one screw, undo the wing nut, swing the bracket over and you can push the antenna down for covered storage. At least that's the idea. This will be ready to accept coax which is up in the air since many people want to route them differently. and it needs a merge of the two wires. Merge up close? or run two long coaxes?

The masts are period correct but not the necked down originals and not junk(I have a limited supply of those so once they are gone you'll have to pay big bucks for masts(vans charges 100$ a mast)... I will not find those ever so unless someone makes them... that ain't happening and they are the exact length though. I know you can buy cheapy shorties. These are just a hair thinner also so I'm using custom nipples. You can simply widen them to use original masts which are easier to get from single antenna cars. Once mine are gone if you looking for good quality three piece masts I think you'll have to pony up 85-100$ for 3 piece good quality longer stainless for late 60's-70's cars. I can't find anymore correct length ones for anything reasonable. I see a few repops show up on ebay for 30-50$ a piece so I might need to resort to those if I run out.  I will probably lose money on this deal



Edited by mikes2nd 2017-04-16 6:35 PM
Top of the page Bottom of the page
northernpower
Posted 2017-05-05 7:31 PM (#539530 - in reply to #538205)
Subject: Re: Interest in repop dual antennas?


Member

Posts: 15

HI I am willing to take 2 sets of your antennas for 57-59 dodge and chryslers. Just let me know as soon as you are ready.
Top of the page Bottom of the page
mikes2nd
Posted 2017-07-29 6:54 PM (#545135 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525

Okay dammit these things are a pita but getting there..... I got 4 more almost done today



Edited by mikes2nd 2017-07-29 6:56 PM




(ssdd.jpg)



Attachments
----------------
Attachments ssdd.jpg (206KB - 56 downloads)
Top of the page Bottom of the page
mstrug
Posted 2017-07-29 7:12 PM (#545138 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?



Expert 5K+

Posts: 5553
50005002525
Location: Newark, Texas (Fort Worth)
Looking good Mike!
Top of the page Bottom of the page
billy
Posted 2017-08-08 1:44 PM (#545846 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?



Veteran

Posts: 279
100100252525
Location: upstate new york
Did this project ever take off? I could use a pair...(antennas that is...)
thanks, billy
Top of the page Bottom of the page
mikes2nd
Posted 2017-08-08 5:26 PM (#545869 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
Getting more done, I'm molding tips also, I finally have time. They take a ton of time per side.

Top of the page Bottom of the page
Moparbo
Posted 2017-10-14 1:44 PM (#550291 - in reply to #545869)
Subject: Re: Interest in repop dual antennas?


Member

Posts: 28
25
I'm ready for several sets when ewer you have them ready for sale.
Top of the page Bottom of the page
mikes2nd
Posted 2017-10-14 7:38 PM (#550306 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
Making gaskets now... Uhg

Slow but steady? This will happen!
Top of the page Bottom of the page
mikes2nd
Posted 2017-12-11 12:44 AM (#554072 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525

I received some extra gaskets, can start molding those finally.  I hope my rubber isnt too stiff.

It took me an extra few months to receive these, finally found someone with some spares.

I will be selling these also since Gary is out of stock.



Edited by mikes2nd 2017-12-11 12:46 AM




(gaskets.jpg)



Attachments
----------------
Attachments gaskets.jpg (109KB - 33 downloads)
Top of the page Bottom of the page
sermey
Posted 2017-12-14 12:03 PM (#554313 - in reply to #554072)
Subject: Re: Interest in repop dual antennas?


Elite Veteran

Posts: 1009
1000
Location: SWITZERLAND

mikes2nd - 2017-12-11 6:44 AM

I received some extra gaskets, can start molding those finally.  I hope my rubber isnt too stiff.

It took me an extra few months to receive these, finally found someone with some spares.

I will be selling these also since Gary is out of stock.

Mike, check that the material used for the top antenna guide is RF-proof, or the antenna signal may be attenuated or even short-cut. This piece I would do in 3D-Printing from a model.

The material for the gasket should be better than the ones offered, becoming soft after a few year.

Nice job, but technical details have to be considered.  - SERGE - 

:

Now I have added a STL-File (505k -> not accepted), thus a ZIP-File for you can direct 3D-Print this piece. The antenna diameter is not FWL-like,

but according available antenna masts (8.9mm). If you give me your dimensions I will adapt it for you.  - SERGE -



Edited by sermey 2017-12-14 1:35 PM




(Rear Antenna Guide.jpg)



Attachments
----------------
Attachments Rear Antenna Guide.jpg (59KB - 28 downloads)
Attachments 2016-04-22 Rear Antenna Guide STL.zip (210KB - 32 downloads)
Top of the page Bottom of the page
sermey
Posted 2017-12-22 1:42 AM (#554848 - in reply to #554313)
Subject: Re: Interest in repop dual antennas?


Elite Veteran

Posts: 1009
1000
Location: SWITZERLAND

Rear Antenna Gaskets: to be correct: the left and right antenna gasket are slightly different. As they are offered too big they fit on both.

Here again some RealViews as reference of the gaskets and the rear antennas.  - SERGE -

 

N.B. The antenna body could be done as well by 3D-Printing with the STL-Files of the shown design. Accuracy with other tested 3D-Printed parts was 0.1mm.

As done here by Mike as well OK, but more "Original" and more manual job!

Antenna Gasket:
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=34070&start=33

Rear Antenna:
http://www.forwardlook.net/forums/forums/thread-view.asp?tid=34070&start=29

 



Edited by sermey 2017-12-22 1:44 AM
Top of the page Bottom of the page
mikes2nd
Posted 2017-12-22 6:31 AM (#554853 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525

interesting. There is variations in rubber molding of course with shrinkage.

You sure it just wasn't a bad run? Ill check my originals.



Edited by mikes2nd 2017-12-22 6:35 AM
Top of the page Bottom of the page
mikes2nd
Posted 2018-02-06 4:00 PM (#557610 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
okay I have the tips and gaskets molded in "hard plastic". I need to clean these up and then make a final mold for the rubber.





(gasketandtips.jpg)



Attachments
----------------
Attachments gasketandtips.jpg (160KB - 28 downloads)
Top of the page Bottom of the page
Lancer Mike
Posted 2018-02-06 9:19 PM (#557622 - in reply to #557610)
Subject: Re: Interest in repop dual antennas?



500020001000500
Location: The Mile High City
Nice work Mike. Maybe make some extra gaskets and nipples. I - and maybe some others - would like to buy a set of those separately.
Top of the page Bottom of the page
mikes2nd
Posted 2018-02-06 10:21 PM (#557625 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
yeah ill be making extras, this has been a pita! I have to mold 3 times for the gaskets and 3 for the nipples to get it right. The ones from goers were really rough so I built with clay them up so I can smooth them up.

there were also two versions, one too short and one the right length... and they were warped...
Top of the page Bottom of the page
mikes2nd
Posted 2018-07-10 11:41 PM (#566447 - in reply to #492888)
Subject: Re: Interest in repop dual antennas?


Expert

Posts: 2993
2000500100100100100252525
f'ing eh its been a long haul.. I guess if I was going to make money on this deal it would help but eh.

anyways after back and forth chromer is content with the polishing level(he said he will do the final step and then he hem hawed for months and said im finally in line) and I had to be very very explicit about don't buff the sharp edges off please! One guy who said he would polish them took 3 sets and polished the edges right off... k thanks...

I will sell with two types of antennas. I made the tips "drillable" to whatever size you need. I have two types of masts. No one makes a original but one is chromed and the other stainless. (I do have a new contact though so maybe...)

I might have a hook on a couple sets of originals also.

The center is the orignial ball, next biggest is the chromed mast, smallest is the stainless. Stainless is least expensive.

Kit will come with two bases, two gaskets, two masts and two tips and hardware. You can worry about the wiring




(antennas.jpg)



(atips.jpg)



Attachments
----------------
Attachments antennas.jpg (224KB - 16 downloads)
Attachments atips.jpg (134KB - 15 downloads)
Top of the page Bottom of the page
Jump to page : 1 2
Now viewing page 2 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)