Viewing a thread - Heater hose location on my 56 Town & Country

You are logged in as a guest. ( logon | register )

Heater hose location on my 56 Town & Country Jump to page : 1 Now viewing page 1 [50 messages per page]	View previous thread :: View next thread
Forward Look Technical Discussions -> Heating, Cooling and Air Conditioning	Message format

rhford

Posted 2016-03-28 9:07 PM (#508188)
Subject: Heater hose location on my 56 Town & Country

New User

Posts: 3

When I purchased my 56 Chrysler Wagon, the heater control valve and the heater core were bypassed.
The heater control valve was locked up and the cable was broken.
I have since rebuilt the valve, replaced the cable and I'm ready to replace the hoses.
By the way, Autozone carries a molded 5/8 heater hose that is perfect for the 180 degree hose required from the heater valve to the lower core connection - part number B86050.
Now I need to identify which port on the my 331 goes to the valve and which one goes to the upper core connection.
I have looked all over the internet and have found several examples connected both ways!
Anyone know the correct connections?

Jump to page : 1
Now viewing page 1 [50 messages per page]

Jump to forum :

Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *

(Delete all cookies set by this site)