The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

is this correct heater core for a 715 heater?
Jump to page : 1
Now viewing page 1 [50 messages per page]		View previous thread :: View next thread
   Forward Look Technical Discussions -> Heating, Cooling and Air ConditioningMessage format
 
udoittwo
Posted 2016-09-05 8:37 AM (#520551)
Subject: is this correct heater core for a 715 heater?


Expert

Posts: 1348
100010010010025
Location: Valley Forge, Pa.		Some one gave me this core shortly after I bought my 60 Plymouth 10 years ago. I had a leak in mine and had it fixed and had this one pressure tested at the same time for a spare. I am fairly sure I compaired the 2 at the time but that was 9 years ago. I found it again yesterday and noticed it has "DPCD AC" stamped on it. My car is not AC. Does the "AC" have any meaning?

Its been so long that I don't remember what the difference is between the MODEL 715 and 716 heaters are but I wrote down at the time that mine is a 715. Don't remember right off hand what the difference is and I don't carry a shop manual around with me..

The frame is 9 1/2" X 15 7/8". The actual core measuring from outer edge of tanks is 12 3/8" x x6 3/8". Depth approx. 2". What years was the MODEL 715 used and will this core fit ALL 715s?

If this is not correct for my system, please let me know so I can try to sell it.

I thought WINDOWS 10 was supposed to be easier. Before with 8.1 I could reduce a picture to work here in few steps, now it takes 10 steps or maybe there is an easier way? But I finally got it, just hope I can remember how to do it again?

Thanks again,
Karl.

Edited by udoittwo 2016-09-05 9:06 AM




(DSCN3656.JPG)



Attachments
----------------
Attachments DSCN3656.JPG (182KB - 172 downloads)
Top of the page Bottom of the page
Viper Guy
Posted 2016-09-05 11:15 PM (#520597 - in reply to #520551)
Subject: Re: is this correct heater core for a 715 heater?



Expert

Posts: 2003
2000
Location: Branson, MO		I dunno, the measurements are taken/shown with a Chevrolet ruler and I have to question the accuracy - tee, hee!
Top of the page Bottom of the page
udoittwo
Posted 2016-09-06 8:07 AM (#520611 - in reply to #520551)
Subject: RE: is this correct heater core for a 715 heater?


Expert

Posts: 1348
100010010010025
Location: Valley Forge, Pa.		Funny, I never even noticed that. Its a yard stick from a local dealership. It has to be fairly old the address is pre-zip code.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)