The Forward Look Network | ||
| ||
Another Wheel option? Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> Brakes, Wheels and Tires | Message format |
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | I have a new to me 1956 Dodge Custom Royal D-500. Currently is on some ancient Sears white-wall balloon bias ply tires on the original rims. I have decided to go with radials (235/75/15) with a narrow white wall. (I understand that I will need an alignment with less (more?) toe-in/out when I get to that point. I was thinking of buying American Racing Torq Thrusts for the car but they are a bit spendy for me. As it happens, I bumped into a set of 15 x 7J Mopar cop wheels at the Monroe, WA swap meet last weekend for decent money. With dog dish caps (not the true cop dog dishes - same shape but no holes). I got my friendly tire shop to mount a new 235/75/15 on one of the cop wheels so I could check clearances. Looks fine at the front - but I had to trim the rear fender inner lip down by about 3/4" to get about 1/2" clearance for the fat part of the tire. Here is a bad "photoshop" (Paint) mock-up of what the wheels might look like. I have the 12" nominal (actually something like 13.5" diameter) D-500 drums to show off so I like the slots in the cop wheels. Anyway, thought I would share (and see how many haters there are) (The mock up wheel photos were taken from photos of a 1985 Dodge Diplomat detective's car I found on the internet). Edited by 56D500boy 2016-10-16 10:51 PM (DavesCopCarWheelTrial_2.jpg) Attachments ---------------- DavesCopCarWheelTrial_2.jpg (207KB - 183 downloads) | ||
mikes2nd |
| ||
Expert 5K+ Posts: 5006 | not bad | ||
plumfloored |
| ||
Regular Posts: 54 Location: Avondale, AZ | I think they would look great with wide whites. They can add them to the black wall side of your tires | ||
Powerflite |
| ||
Expert 5K+ Posts: 9605 Location: So. Cal | I like the dog dish look. I would probaby paint the new wheels the darker blue color, and weld 1/2" OD pipe to the nubs on the wheels so that you can mount the older style dog dish caps. Then run with the original '56 Dodge poverty caps like these. Sorry I don't have a bigger picture. You can also use a thin trim ring to highlight the wheel a little more if you like. (56DodgePovertyCap.jpg) Attachments ---------------- 56DodgePovertyCap.jpg (3KB - 181 downloads) | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | I have only seen one 56 Dodge dog dish poverty cap on ebay (recently - but I can't find it now) so finding a set of 4 might be a challenge. I was thinking of painting the outer portion of the wheels silver and the inners either the dark blue (metallic) or a gunmetal grey. The two drums that I have painted, I did in caliper paint silver. The ones that came with the cop car wheels are like those shown below (no holes like the proper cop car dog dishes) | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | Well I guess I am not the only one who thinks that the Dodge Diplomat cop wheels look good on a classic Mopar or any Mopar. | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | So as planned, I had new tires (235/75/15 mini-van radials) installed on my bargain find ($200 for the 4 with dog dishes) cop car wheels. Now the question is what colour should I paint the 12" Chrysler brake drums? I've got the left side ones painted Tremclad aluminum. The right side hasn't been touched. Either I paint them aluminum too or I paint them semi-gloss black and then paint the left side ones semi-gloss black. Not sure which way to go. Left side: Right side at the moment (dog dishes not installed): Edited by 56D500boy 2016-12-05 9:45 PM | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |