The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Sticky Parting over 40 FL cars
Jump to page : < ... 14 15 16 17 18 19 20 >
Now viewing page 20 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUTMessage format
 
Chrysleri
Posted 2017-09-06 8:56 AM (#547827 - in reply to #547422)
Subject: Re: Parting over 40 FL cars


Regular

Posts: 62
2525
Location: Nokia, Finland
Ok. Thanks anyway
Top of the page Bottom of the page
big m
Posted 2017-09-14 11:04 AM (#548364 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
Just picked up a '57 New Yorker, has rust free trunk floor and nice trim-
4-door hardtop for parts.
Top of the page Bottom of the page
springsweptwing
Posted 2017-09-14 3:26 PM (#548385 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Elite Veteran

Posts: 982
500100100100100252525
Location: Blackpool, United Kingdom.
Hi John,

How much would the trunk floor be including shipping to Florida?

Thanks Paul.
Top of the page Bottom of the page
big m
Posted 2017-09-14 4:07 PM (#548388 - in reply to #548385)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
springsweptwing - 2017-09-14 12:26 PM

Hi John,

How much would the trunk floor be including shipping to Florida?

Thanks Paul.


Hi Paul,

The trunk floor, complete with tailpanel, cut just beyond each seam, will be $500, Shipping to FL. will be around $400, if you're interested, I can get a shipping quote.

---John
Top of the page Bottom of the page
springsweptwing
Posted 2017-09-15 3:53 PM (#548463 - in reply to #548388)
Subject: Re: Parting over 40 FL cars



Elite Veteran

Posts: 982
500100100100100252525
Location: Blackpool, United Kingdom.
PM sent John, thanks Paul.
Top of the page Bottom of the page
ply57nz
Posted 2017-09-19 11:38 PM (#548754 - in reply to #548463)
Subject: Re: Parting over 40 FL cars



Regular

Posts: 81
252525
Location: New Zealand
The hood letters arrived today John, Great pieces and I'm very happy with them. Thanks again for all your help.

Cheers Norm

Edited by ply57nz 2017-09-20 1:19 AM
Top of the page Bottom of the page
big m
Posted 2017-09-24 11:12 AM (#549055 - in reply to #548754)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
ply57nz - 2017-09-19 8:38 PM

The hood letters arrived today John, Great pieces and I'm very happy with them. Thanks again for all your help.

Cheers Norm


Thanks for letting me know, Norm!

---John
Top of the page Bottom of the page
billy
Posted 2017-09-30 10:33 AM (#549471 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Veteran

Posts: 205
100100
Location: upstate new york
John,
I need sheetmetal just below the rear window along the trunk...where my trim below the window was sitting, it is rotted thru...not sure how that could even be cut,,,any ideas?
Thanks,
billy
Top of the page Bottom of the page
big m
Posted 2017-09-30 10:46 AM (#549472 - in reply to #549471)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
billy - 2017-09-30 7:33 AM

John,
I need sheetmetal just below the rear window along the trunk...where my trim below the window was sitting, it is rotted thru...not sure how that could even be cut,,,any ideas?
Thanks,
billy


I'll have a look to see that it's good. Your car is a four door HT, Correct?

---John
Top of the page Bottom of the page
big m
Posted 2017-10-01 10:42 AM (#549524 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
Hi Billy,

I do have the rear window channel in nice condition, how much of it do you need?

---John
Top of the page Bottom of the page
brdtee
Posted 2017-10-03 12:43 PM (#549687 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Veteran

Posts: 176
100252525
Location: Pieksamaki, Finland, Europe
I'm looking for 1957 Chrysler 4d Sedan parts such as..

* Sill plates in good condition. Mine have been somewhat corroded.
* The chrome molding that runs on the door panel above the black bottom part, one is enough.
* P/S pump for 354 poly.
* Solid and straight upper RH molding of the Windsor color sweep panel.
Top of the page Bottom of the page
big m
Posted 2017-10-03 6:21 PM (#549714 - in reply to #549687)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
brdtee - 2017-10-03 9:43 AM

I'm looking for 1957 Chrysler 4d Sedan parts such as..

* Sill plates in good condition. Mine have been somewhat corroded.
* The chrome molding that runs on the door panel above the black bottom part, one is enough.
* P/S pump for 354 poly.
* Solid and straight upper RH molding of the Windsor color sweep panel.


I have four good sill plates, the best driver side front has a smalls pot of corrosion at the lower edge by the carpet, but the rest is good.
I have the lower doorpanel molding from a Windsor, but they are specific to driver or passenger sides, so I'll need to know which you need.

Upper quarter panel molding, I'll also need to know which side is needed, I have both.

---John
Top of the page Bottom of the page
brdtee
Posted 2017-10-07 12:39 PM (#549928 - in reply to #549714)
Subject: Re: Parting over 40 FL cars



Veteran

Posts: 176
100252525
Location: Pieksamaki, Finland, Europe
big m - 2017-10-04 1:21 AM

brdtee - 2017-10-03 9:43 AM

I'm looking for 1957 Chrysler 4d Sedan parts such as..

* Sill plates in good condition. Mine have been somewhat corroded.
* The chrome molding that runs on the door panel above the black bottom part, one is enough.
* P/S pump for 354 poly.
* Solid and straight upper RH molding of the Windsor color sweep panel.


I have four good sill plates, the best driver side front has a smalls pot of corrosion at the lower edge by the carpet, but the rest is good.
I have the lower doorpanel molding from a Windsor, but they are specific to driver or passenger sides, so I'll need to know which you need.

Upper quarter panel molding, I'll also need to know which side is needed, I have both.

---John


* Sill plates sound good. Mine have quite bad corrosion on the outer edges, especially the rear door ones.
* Do you have full door panels as well? Mine are trim code 055. Not beyond repair but minor damage. If yours would be same color and in better shape, they could be interesting. Also interested in front door inner handles if the vinyl part and the padding is good.
* I guess moldings for both front doors would be needed. If only one, then the passenger side.
* Upper color sweep quarter panel molding would be the passenger side as well.

I have a shipping address in U.S., my friend can deliver the goods overseas from there.
Top of the page Bottom of the page
big m
Posted 2017-10-18 10:14 AM (#550539 - in reply to #549928)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
brdtee - 2017-10-07 9:39 AM

big m - 2017-10-04 1:21 AM

brdtee - 2017-10-03 9:43 AM

I'm looking for 1957 Chrysler 4d Sedan parts such as..

* Sill plates in good condition. Mine have been somewhat corroded.
* The chrome molding that runs on the door panel above the black bottom part, one is enough.
* P/S pump for 354 poly.
* Solid and straight upper RH molding of the Windsor color sweep panel.


I have four good sill plates, the best driver side front has a smalls pot of corrosion at the lower edge by the carpet, but the rest is good.
I have the lower doorpanel molding from a Windsor, but they are specific to driver or passenger sides, so I'll need to know which you need.

Upper quarter panel molding, I'll also need to know which side is needed, I have both.

---John


* Sill plates sound good. Mine have quite bad corrosion on the outer edges, especially the rear door ones.
* Do you have full door panels as well? Mine are trim code 055. Not beyond repair but minor damage. If yours would be same color and in better shape, they could be interesting. Also interested in front door inner handles if the vinyl part and the padding is good.
* I guess moldings for both front doors would be needed. If only one, then the passenger side.
* Upper color sweep quarter panel molding would be the passenger side as well.

I have a shipping address in U.S., my friend can deliver the goods overseas from there.


The door panels are all in poor condition, as are the armrest pads. I do have the door trim pieces, however.

---John
Top of the page Bottom of the page
luedi
Posted 2017-10-23 2:36 PM (#550866 - in reply to #34526)
Subject: RE: Parting over 40 FL cars



Extreme Veteran

Posts: 475
100100100100252525
Location: Hamburg-Germany
hi john
I need the throttle torque shift between carburetor and linkage on the fire wall
first pic it s the shift on my belvedere
sec pic it s from the diplomat missing the shift



(75.JPG)



(74.JPG)



Attachments
----------------
Attachments 75.JPG (175KB - 20 downloads)
Attachments 74.JPG (176KB - 21 downloads)
Top of the page Bottom of the page
brdtee
Posted 2017-10-27 6:41 AM (#551160 - in reply to #550539)
Subject: Re: Parting over 40 FL cars



Veteran

Posts: 176
100252525
Location: Pieksamaki, Finland, Europe
big m - 2017-10-18 5:14 PM

The door panels are all in poor condition, as are the armrest pads. I do have the door trim pieces, however.

---John


Sent you e-mail last week, did it come thru? I've had some issues with mails disappearing to cyberspace here in my end.

-Heikki-
Top of the page Bottom of the page
big m
Posted 2017-10-27 11:03 AM (#551179 - in reply to #551160)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
brdtee - 2017-10-27 3:41 AM

big m - 2017-10-18 5:14 PM

The door panels are all in poor condition, as are the armrest pads. I do have the door trim pieces, however.

---John


Sent you e-mail last week, did it come thru? I've had some issues with mails disappearing to cyberspace here in my end.

-Heikki-


I'll double c heck on that, and let you know.
Top of the page Bottom of the page
GSMDodge
Posted 2017-10-30 11:17 PM (#551370 - in reply to #34526)
Subject: Re: Parting over 40 FL cars


Member

Posts: 15

Location: Knoxville, TN
John,

I need several parts from a '60 Matador or Polara. They include front clip parts between the hood and front bumper (emblem, grille, shield, skirt), two 14" hubcaps (4 bar; spinner?), and the aluminum deflectors on each rear quarter panel (in front of the rear wheels). Let me know if you have at of these parts or where I might find them. Thanks,

Ken Cunningham (865) 607-0406
Top of the page Bottom of the page
floyd066
Posted 2017-11-18 12:18 AM (#552577 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Extreme Veteran

Posts: 318
100100100
Location: Vancouver, Wa the "Couv"
Looking for a nice turn signal stem for a 55-56 Chrysler or Desoto.
Top of the page Bottom of the page
big m
Posted 2017-11-20 11:30 AM (#552767 - in reply to #552577)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
floyd066 - 2017-11-17 9:18 PM

Looking for a nice turn signal stem for a 55-56 Chrysler or Desoto.


I have one with decent chrome in a '56 Chrysler, $30 plus shipping.

---John
Top of the page Bottom of the page
floyd066
Posted 2017-12-01 1:52 AM (#553469 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Extreme Veteran

Posts: 318
100100100
Location: Vancouver, Wa the "Couv"
can you shoot me a picture?
Top of the page Bottom of the page
Paperweightnate
Posted 2017-12-06 6:00 PM (#553821 - in reply to #34526)
Subject: Re: Parting over 40 FL cars


Member

Posts: 5

Big M! 1955 Chrysler Windsor, currently looking for the following: Windshield, New Yorker exterior trim package, Front drivers door, Front drivers door handle. Thanks!
Top of the page Bottom of the page
big m
Posted 2017-12-07 6:36 PM (#553869 - in reply to #553821)
Subject: Re: Parting over 40 FL cars



Expert 5K+

Posts: 7363
500020001001001002525
Location: Williams California
Paperweightnate - 2017-12-06 3:00 PM

Big M! 1955 Chrysler Windsor, currently looking for the following: Windshield, New Yorker exterior trim package, Front drivers door, Front drivers door handle. Thanks!


I'm assuming your car is a 4-door sedan.

I have complete New Yorker trim, A good left front door, used windshield. I did not have the door handle.

---John
Top of the page Bottom of the page
RDP
Posted 2017-12-09 1:46 PM (#553984 - in reply to #34526)
Subject: Re: Parting over 40 FL cars



Extreme Veteran

Posts: 532
50025
Location: PL / EU
hi John!
'56 Chrysler 2dr door latches?
Top of the page Bottom of the page
Jump to page : < ... 14 15 16 17 18 19 20 >
Now viewing page 20 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)