The Forward Look Network | ||
| ||
Parting over 40 FL cars Jump to page : < 1 2 3 4 5 6 7 8 9 10 ... > Now viewing page 5 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUT | Message format |
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Ken, I don't recall seeing any overdrive equipped cars here, but I'll doublecheck for you, and let you know. ---John | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | John .. Can you Help with Dual Antenna COAX Wires and T-piece Joiner... Check this Thread... http://forwardlook.net/forums/forums/thread-view.asp?tid=16103 | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Clive, It looks like the few cars here that were equipped with rear antennas have had mice gnawing on the cables. Have you checked with an electronics store for these? I don't know if you have Radio Shack stores over in the UK, but it seems I have bought those items there in the past. ---John | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | big m - 2007-08-30 12:13 AM Clive, It looks like the few cars here that were equipped with rear antennas have had mice gnawing on the cables. Have you checked with an electronics store for these? I don't know if you have Radio Shack stores over in the UK, but it seems I have bought those items there in the past. ---John JOHN,, I have the Cables Sorted , Do you have the T-Piece Joiner, Or i will have to have one Made.. Thanks CLIVE | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | BTW,,,,,,,,,,, I collected "White Lightnin" today from the Docks, ,,, So i finally have the Pair Rear Brake Drums for my 59 Coronet you brought to TULSA for me.. I left them in the Trunk , So didn,t have to Pay Shipping Costs... Many Thanks, Clive | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Rebels-59 Coronet - 2007-09-12 2:40 PM BTW,,,,,,,,,,, I collected "White Lightnin" today from the Docks, ,,, So i finally have the Pair Rear Brake Drums for my 59 Coronet you brought to TULSA for me.. I left them in the Trunk , So didn,t have to Pay Shipping Costs... Many Thanks, Clive Perfect! Your taxes are ridiculously high anyways, especially duties from goods brought into the country. I'll check to see if I have the dual antenna junction piece and let you know. ---John | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | John,, I Postewd this Under the Wanted Ads as well.. But here is a Copy.. I need the Drivers Vent Window Lower Bracket With Or Without the Lock. Mine has the Pot Metal Cracked , I think someone has Forced the Window years Ago, Not sure if you remove the Glass, The bracket may pull out, Or it may have to come with the Post Frame.. Mine is a 4 Door Sedan. It Appears the same as my 59 Dodge, So 57 / 58 and 59 may all be the Same.. I can post PIC,s tomorrow if Needed,, Let me KNOW,,,, | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Hi Clive, that item I definitely have. If I recall correctly, that piece comes as part of the entire wing window assembly. $30 for a complete unit in good condition. ---John | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | John.. Any idea how much Airmail Shipping would be to ENGLAND UK.. I checked with my 59 Dodge and they are Identical.. I was wondering if you removed the Glass, Would the Piece i need just Pull out , As it Obvousily Swivels to allow the Window to Open And Close.. ??? Here are a Couple PIC,s . The outside Pic is the Passenger Side , As the Car was parked Too tight in the Garage Wall.. But it is the DRIVERS Side Needed.. (100_2992.JPG) (100_2993.JPG) Attachments ---------------- 100_2992.JPG (60KB - 706 downloads) 100_2993.JPG (79KB - 792 downloads) | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | Do you have the Emblems that fit inside the Chrome Ornaments on the Trunk and Hood..??? (100_2995.JPG) (100_2996.JPG) Attachments ---------------- 100_2995.JPG (40KB - 731 downloads) 100_2996.JPG (36KB - 726 downloads) | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Hi Clive, I sent you an e-mail re:the postage on the wing window assy. I looked at the 2 '59 Chryslers I have, and would have to say that their deck and hood badges are no better than the ones you have shown me. ---John | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | JOHN.. Here is Another Enquiry. This Page is starting to Look like our own Personal Thread.. LOL 1960 Fury,, Pair Chrome Wiper Arms,,, Not the Blades or Holders, Just the Arms where they bolt to the Mechanism, These are for Charlie, Wish i knew a Few days Back,, He has just bought NOS Blades Complete , But the Holding Clips on the End of his arms have been broken off to allow the Fitment of euro Blades, And he wants to go back to Original... If you have Them, PM me the Price Plus Shippng,,, I also need 5 Left Hand Thread Wheel Nuts for the Drums i Got from you in Tulsa,, My Rears are BOTH RH Thread.. P.S.. Charlie has the CD you Asked About,, So send me your Full Address.. CLIVE | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | I'll check on those other items for you and let you know. I am sure I have the left hand thread lug nuts. ---John | ||
plymouth |
| ||
Expert Posts: 2264 Location: McComb, Mississippi | john,Do you have a 57 58 plymouth radio? | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | big m - 2007-09-18 1:22 AM Hi Clive, I sent you an e-mail re:the postage on the wing window assy. ---John John,, I received the Vent Window safely Today... You wrapped it Very well............ Many Thanks, Clive | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Rebels-59 Coronet - 2007-10-01 3:09 AM big m - 2007-09-18 1:22 AM Hi Clive, I sent you an e-mail re:the postage on the wing window assy. ---John John,, I received the Vent Window safely Today... You wrapped it Very well............ Many Thanks, Clive Thanks for letting me know, Clive. ---John | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | plymouth - 2007-09-29 1:55 PM john,Do you have a 57 58 plymouth radio? Hi Christian, I have a complete radio with a clean faceplate for $55.00. Working condition is unknown. Please let me know if you are interested, John | ||
Chopper John |
| ||
Expert Posts: 1488 Location: Florida | Geoff- Did you ever find the hood latch cross-piece you were looking for? I have one on a parts car - I can take a pic & send it to you to confirm it's the same piece, since it's from a '57. Chopper John | ||
SaulP |
| ||
Regular Posts: 68 Location: Berkeley, CA | John, (copied from Plymouth Central WANTED section, posted by meg696) Its going to be a while before I head up North, longer than I want to wait to continue with this car. What's the condition and price of both vent window assemblies for the 57 2 dr ht (looking for good chrome finish), mirror attachment hardware and left rear wheel gravel guard? Also, do you have any straight, clean front aluminum grills? | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Saul, I sent you a PM regarding these parts. ---John | ||
SaulP |
| ||
Regular Posts: 68 Location: Berkeley, CA | John, I sent you a PM. | ||
mopartim |
| ||
Member Posts: 7 | Looking for a center grille section and front bumper for a 56 Suburban Wagon. Any luck on your 56? Thanks! e mail me at suckerpunchnc@yahoo.com | ||
mopartim |
| ||
Member Posts: 7 | And also, the tailgate mouldings, the small vertical ones. And a decent steering wheel. And the optional 3rd seat. | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Tim, I'll look to see what I have, and it's condition. ---John | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Tim, the grill is gone already, and it appears as though someone has pulled the car using a chain around the front bumper. It would need serious straightening before plating. One of the guards is perfect, the other has a dent. No rust, however. No dice on the third seat, the only '56 wagon I have is a 2-door, pretty much a stripper, The only emblem this model wears on it's tailgate is the chrome V. The steering wheel is history. ---John | ||
badbelair |
| ||
Veteran Posts: 282 Location: Henderson, T.N. | hey bud Im looking for the two pices of crome that are on the bottom of the tail lights on a 58 ply.Thanks | ||
fast59desoto |
| ||
Elite Veteran Posts: 929 Location: Finger Lakes NY | hey john did you ever get those 5 59 desotos? jeff | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | Hey JEFF.. There is a 3 Page Thread with PIC,s about it... Use this Link.. http://forwardlook.net/forums/forums/thread-view.asp?tid=17225&post... | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | BTW,, The 55 Desoto is sold to Mark, aka 1959Fury............ | ||
fast59desoto |
| ||
Elite Veteran Posts: 929 Location: Finger Lakes NY | hey john can you contact me im interested in alot of parts from those 59's jeff | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Hi Jeff, I'll send you an e-mail. ---John | ||
Bart_59_Dodge |
| ||
Expert Posts: 1443 Location: Oconomowoc Wi | John, Do you have any Automatic headlight dimmer stuff? I have the dashboard sensor, but not the relay or wiring harness. Bart | ||
Bart_59_Dodge |
| ||
Expert Posts: 1443 Location: Oconomowoc Wi | Hi John, Any pedal assemblies for manual transmissions?... | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Howdy Bart, I do have a manual trans hanging pedal assembly, but I had no luck on the automatic dimmer pieces. Let me know if you still need the pedal assy. ---John | ||
matador440 |
| ||
Elite Veteran Posts: 690 Location: BELTSVILLE, MARYLAND 20705 | HI JOHN, HOW ABOUT THE 59 DESOTO WAGON SIDE LEFT MOULDINGS, WE TALKED ABOUT . WERE YOU ABLE TO COME UP WITH THEM?? SMITTY | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Check your PM's, Smitty. I did have these and sent you a message several days ago. ---John | ||
59CRL |
| ||
Expert Posts: 2679 | Hello John.... would you have any chrome eyebrow trim for the 59 custom royal lancer? Thanks..... Greg. | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Hi Greg, sorry, but the only '59's I currently have are Coronets. If something does turn up, I'll let you know. ---John | ||
1959Dodge |
| ||
Expert Posts: 2244 Location: Yorba Linda, Ca | I think that wrecking yard that is near San Bernardino California was showing a picture of a 59 Dodge , either a Royal or a CR, and both have the wider eyebrows. I will see if I can find that post again about the wrecking yard Gary | ||
Rebels-59 |
| ||
Board Moderator & Exner Expert 10K+ Location: .Norfolk..Mafia.. ,England UK | 1959Dodge - 2008-01-31 7:20 PM I think that wrecking yard that is near San Bernardino California was showing a picture of a 59 Dodge , either a Royal or a CR, and both have the wider eyebrows. I will see if I can find that post again about the wrecking yard Gary Gary,, I think you mean this.. http://forwardlook.net/forums/forums/thread-view.asp?tid=13848&post... They wanted to Clear the Yard, So not sure if they ever did.. | ||
1959Dodge |
| ||
Expert Posts: 2244 Location: Yorba Linda, Ca | Yep that was it Thanks, a user here was looking for the eyebrows for a CR as you can see, they list a Royal and A CR so maybe they have them I hope he sees our posts Gary | ||
1959Dodge |
| ||
Expert Posts: 2244 Location: Yorba Linda, Ca | Greg, be sure to check out that site, that Vedette recalled, they show 3 cars that could have the wide eyebrows, You will need the trim that goes to them also,(from the fender to the eyebrow) Gary | ||
59CRL |
| ||
Expert Posts: 2679 | Ok, I sent that guy an email, I wish I lived in CA I would drive over there..... thanks guys | ||
Jerry |
| ||
Member Posts: 10 | looking for hood letters on the 1956 plymouth thanks jerry | ||
CustomRoyal |
| ||
Extreme Veteran Posts: 322 | John Would you have a 60-61 Dodge or Plymouth V-8 stick car on the column? Jim | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Hi Jim, I have a '60 Plymouth 2-door sedan with manual column shift, although the transmission is gone. The shifting levers are still attached to the column. Please let me know what you are needing, John | ||
CustomRoyal |
| ||
Extreme Veteran Posts: 322 | Hi John Thanks for checking. Need the block off plate where the auto push buttons are normally. Held on by 4 tiny phillips head screws. Also 2 pieces of linkage(rods) that run from column to transmission, and 2 levers on trannie. Also: 60 Plymouth red dash pad " " bumper jack hook Nice factory front fender antenna assembly with wire and bezel Thank you Jim | ||
rob-redm |
| ||
Member Posts: 45 Location: T-town, Wash. | Hi John, have 1959 PLymouth Suburban Wagon, looking for a really nice front hood stainless (and mounting clips for it) drivers side stainless eyebrow trim above headlight/ also both stainless wiper arms and wiper blades( rubber rotted , ok I can find refills) also the mounting hardware for them the wiper arms. Do you have any tailgate parts for this car also need the latching parts on the driver side parts , rods, levers etc. Best regards , and Thank you Rob | ||
Josie |
| ||
Member Posts: 43 Location: Richmond, BC Canada | Hi John. I love my radio, it's perfect. I'm looking for a clock for my 56 Custom Royal. What are my chances? | ||
big m |
| ||
Expert 5K+ Posts: 7806 Location: Williams California | Josie - 2008-03-11 11:35 PM Hi John. I love my radio, it's perfect. I'm looking for a clock for my 56 Custom Royal. What are my chances? Sorry Val, none of the other '56's I have are equipped with a clock. ---John | ||
Jump to page : < 1 2 3 4 5 6 7 8 9 10 ... > Now viewing page 5 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |