The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

'55 Plaza Suburban arrives today
Jump to page : < 1 2 3 4 5 6 7 >
Now viewing page 2 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
 
71charger_fan
Posted 2017-01-17 2:59 PM (#531584 - in reply to #531198)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I finally had to give up on the idea of keeping the original one-piece plastic headliner and yanked it out today to make rewiring the back of the car easier. There was another, smaller mouse nest at the top of the windshield and a third in the passenger quarter panel. After I got the headliner out, I had a lot of gross crap to vacuum up.



(phpmMXQWNPM.jpg)



(phpFeenC0PM.jpg)



(php8LFBgbPM.jpg)



Attachments
----------------
Attachments phpmMXQWNPM.jpg (145KB - 47 downloads)
Attachments phpFeenC0PM.jpg (131KB - 51 downloads)
Attachments php8LFBgbPM.jpg (97KB - 48 downloads)
Top of the page Bottom of the page
SavoyPlaza
Posted 2017-01-18 6:26 AM (#531641 - in reply to #526294)
Subject: RE: '55 Plaza Suburban arrives today



Elite Veteran

Posts: 1050
10002525
Location: Georgia
Eeechhh! Glad you got the mice out! Nasty stuff. She's getting better all the time!
Pete
Top of the page Bottom of the page
71charger_fan
Posted 2017-01-18 1:23 PM (#531666 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Smelling better, that's for sure. I'm thinking of going with the 8-bow headliner that Newstalgia sells. Gets expensive when you have to also buy bows.

Edited by 71charger_fan 2017-01-18 1:24 PM
Top of the page Bottom of the page
71charger_fan
Posted 2017-01-21 8:33 PM (#531969 - in reply to #531666)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Took forever to wire in the right front park lamp/turn signal today as my supervisor felt the need to closely inspect everything.




(phpBFtv5FPM.jpg)



Attachments
----------------
Attachments phpBFtv5FPM.jpg (71KB - 48 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-01-23 8:58 AM (#532099 - in reply to #531969)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I went with Sylvania Xtra Vision headlights. I needed a 12V horn, so I pulled an extra '71 horn off the shelf and mated it to a bracket from an '87 Lancer which I drilled and tapped. I'm still trying to decide which disc brake conversion to go with so I wired the brake light circuit with extra wire so the switch can be moved around if necessary. My graveyard of old wiring is still growing, but, at this point, almost all of the old wiring is out now. The "boss" continues to oversee progress.



(Plaza Headlight.jpg)



(Plaza Horn.jpg)



(Plaza Wiring Graveyard.jpg)



(Plaza MC.jpg)



(Bear the Overseer.jpg)



Attachments
----------------
Attachments Plaza Headlight.jpg (115KB - 36 downloads)
Attachments Plaza Horn.jpg (124KB - 50 downloads)
Attachments Plaza Wiring Graveyard.jpg (126KB - 47 downloads)
Attachments Plaza MC.jpg (132KB - 43 downloads)
Attachments Bear the Overseer.jpg (103KB - 48 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-01-25 8:35 PM (#532343 - in reply to #532099)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Pulled the upper metal dash which was badly peeling to give it a coat of satin black. Having that out of the way made it easier to mount a couple of resistors for the 6V wiper and blower motors.



(phpuRwwoNPM.jpg)



(phpSnNycQPM.jpg)



(phpN9ko5OPM.jpg)



Attachments
----------------
Attachments phpuRwwoNPM.jpg (157KB - 42 downloads)
Attachments phpSnNycQPM.jpg (79KB - 43 downloads)
Attachments phpN9ko5OPM.jpg (97KB - 46 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-01-31 8:09 PM (#532842 - in reply to #532343)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I stripped all the gauges out of the dash panel for painting and installed the electronic voltage reducers on the temp and gas gauges.



(Plaza dash frame.jpg)



(Plaza gauges.jpg)



Attachments
----------------
Attachments Plaza dash frame.jpg (120KB - 50 downloads)
Attachments Plaza gauges.jpg (134KB - 42 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-07 4:14 PM (#533456 - in reply to #532842)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Had a nice warm day today. I couldn't let that go to waste. Got the dash panel painted, the steering wheel painted, headlight bezels and some of the dash trim painted. Also swapping the painted tail light bezels for stainless ones I got from CTC Auto Ranch.



(Plaza HL Bezel.jpg)



(Plaza Dash Trim.jpg)



(Plaza Repainted Dash.jpg)



(Plaza Steering Wheel.jpg)



(Plaza TL Bezel.jpg)



Attachments
----------------
Attachments Plaza HL Bezel.jpg (281KB - 45 downloads)
Attachments Plaza Dash Trim.jpg (180KB - 43 downloads)
Attachments Plaza Repainted Dash.jpg (127KB - 42 downloads)
Attachments Plaza Steering Wheel.jpg (98KB - 38 downloads)
Attachments Plaza TL Bezel.jpg (124KB - 45 downloads)
Top of the page Bottom of the page
SavoyPlaza
Posted 2017-02-08 6:18 AM (#533506 - in reply to #526294)
Subject: RE: '55 Plaza Suburban arrives today



Elite Veteran

Posts: 1050
10002525
Location: Georgia
You are attacking this car! Love the updates--looking good!!
Pete
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-15 2:25 PM (#534090 - in reply to #533506)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I adapted a RetroSound 6 3/4" speaker with dual voice coils onto my original speaker bracket. Had to cut away some of the punched grill that was between the dash grill and the speaker to clear the tweeter bridge.



(Plaza factory speaker.jpg)



(Plaza factory speaker removed.jpg)



(Plaza Speaker mount modified.jpg)



(Plaza RetroSound mounted.jpg)



(Plaza speaker installed in dash.jpg)



Attachments
----------------
Attachments Plaza factory speaker.jpg (136KB - 43 downloads)
Attachments Plaza factory speaker removed.jpg (123KB - 38 downloads)
Attachments Plaza Speaker mount modified.jpg (127KB - 41 downloads)
Attachments Plaza RetroSound mounted.jpg (108KB - 42 downloads)
Attachments Plaza speaker installed in dash.jpg (115KB - 42 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-17 8:57 AM (#534209 - in reply to #534090)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I installed a bus bar on the passenger side of the steering column bracket. I'll run a fused accessory lead to that so I'll have a more convenient access point for powering any accessories I may add. Working around the "inspector" sticking his nose into everything added a level of difficulty.



(Plaza bus bar.jpg)



(Bear the inspector.jpg)



Attachments
----------------
Attachments Plaza bus bar.jpg (103KB - 44 downloads)
Attachments Bear the inspector.jpg (90KB - 44 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-18 8:40 PM (#534309 - in reply to #534209)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
After several failed attempts, I finally got the glovebox door and ashtray front to take paint. Whatever textured finish they put on these parts in '55 did not react well with Rustoleum.



(Plaza glove box painted.jpg)



Attachments
----------------
Attachments Plaza glove box painted.jpg (242KB - 36 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-20 7:27 PM (#534415 - in reply to #534309)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Got the dash mostly reassembled. Still have to make up a single DIN radio faceplate for the Pioneer I'm putting in.



(Plaza dash repainted.jpg)



(Plaza dash left section.jpg)



(Plaza dash center section.jpg)



(Plaza right dash section.jpg)



Attachments
----------------
Attachments Plaza dash repainted.jpg (90KB - 49 downloads)
Attachments Plaza dash left section.jpg (90KB - 40 downloads)
Attachments Plaza dash center section.jpg (88KB - 43 downloads)
Attachments Plaza right dash section.jpg (103KB - 38 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-20 7:30 PM (#534417 - in reply to #534415)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I went added a second horn since I had a set from my '71 Charger parts stash.



(Plaza dual horns.jpg)



Attachments
----------------
Attachments Plaza dual horns.jpg (129KB - 48 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-21 9:29 AM (#534445 - in reply to #534417)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
The original dome light fixture was a mess, so I'm using an LED fixture.




(Plaza LED dome light.jpg)



Attachments
----------------
Attachments Plaza LED dome light.jpg (112KB - 45 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-21 4:01 PM (#534461 - in reply to #534445)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I used the terminal block from the core support originally used for headlight wiring to make a ground distribution block. I've run a 10 ga. wire from the battery negative terminal to the block. Now I know I have a good ground. I ran a wire from this ground distribution block over to the passenger side kick panel area and installed a ground distribution block I grabbed off of Ebay. It's nice to have a location to where I know there's a good ground.




(Plaza ground distribution block.jpg)



(Plaza Ebay ground distribution block.jpg)



Attachments
----------------
Attachments Plaza ground distribution block.jpg (145KB - 37 downloads)
Attachments Plaza Ebay ground distribution block.jpg (158KB - 40 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-22 9:26 AM (#534502 - in reply to #534461)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Fortunately for me, the glovebox liner is being reproduced.




(Plaza new and old glovebox.jpg)



Attachments
----------------
Attachments Plaza new and old glovebox.jpg (124KB - 38 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-22 8:19 PM (#534539 - in reply to #534502)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I spent the day sanding and painting the interior trim. Some of it's pretty beat up from over 60 years in the back of a station wagon.



(Plaza repainted trim.jpg)



(Plaza repainted trim (2).jpg)



(Plaza repainted trim (3).jpg)



Attachments
----------------
Attachments Plaza repainted trim.jpg (84KB - 43 downloads)
Attachments Plaza repainted trim (2).jpg (129KB - 48 downloads)
Attachments Plaza repainted trim (3).jpg (81KB - 39 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-23 4:30 PM (#534585 - in reply to #534539)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I prepared a steel plate with a single DIN opening to mount over a spare radio faceplate so I can use a modern Pioneer radio with Bluetooth.




(Plaza single DIN radio mount.jpg)



(Plaza radio faceplate.jpg)



Attachments
----------------
Attachments Plaza single DIN radio mount.jpg (139KB - 40 downloads)
Attachments Plaza radio faceplate.jpg (79KB - 42 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-24 4:35 PM (#534645 - in reply to #534585)
Subject: RE: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I installed the new Pioneer into the modified radio plate today.




(Plaza radio faceplate front.jpg)



(Plaza radio faceplate back.jpg)



(Plaza Pioneer installed.jpg)



Attachments
----------------
Attachments Plaza radio faceplate front.jpg (108KB - 40 downloads)
Attachments Plaza radio faceplate back.jpg (116KB - 40 downloads)
Attachments Plaza Pioneer installed.jpg (84KB - 39 downloads)
Top of the page Bottom of the page
Old Ray
Posted 2017-02-24 5:08 PM (#534647 - in reply to #534645)
Subject: RE: '55 Plaza Suburban arrives today



Veteran

Posts: 254
1001002525
Location: Invermere B.C. Canada - Rocky Mountains
Thank you for posting.

Radio looks great.

I see that Gary S. did a double din in that same place and I would also like to do that for a back up camera (old bad neck) but it sure looks tight for space?

Reply is optional, thanks, Ray.
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-24 9:13 PM (#534659 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I think I double DIN would probably fit fine. the original radio was huge.
Top of the page Bottom of the page
71charger_fan
Posted 2017-02-27 8:20 PM (#534847 - in reply to #534659)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
The oil pressure gauge hard line had a rubber section in it which was cracked and leaking like a sieve. I replaced that with a braided 3AN line. The worst part was having to pull the starter to get to the pressure port on the block.



(Plaza Starter Out.jpg)



(Plaza adapters.jpg)



(Plaza 3AN Line.jpg)



Attachments
----------------
Attachments Plaza Starter Out.jpg (137KB - 41 downloads)
Attachments Plaza adapters.jpg (155KB - 39 downloads)
Attachments Plaza 3AN Line.jpg (134KB - 35 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-01 9:07 AM (#534934 - in reply to #534847)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I disassembled the grill to replace a severely dented piece with an NOS piece I was lucky enough to turn up and put in another NOS piece I didn't really need but was cheap. Whoever repainted this car didn't take anything apart, so I repainted the grill brackets to eliminate the blue overspray.




(Plaza dented grill piece.jpg)



(Plaza grill pieces.jpg)



(Plaza grill brackets.jpg)



Attachments
----------------
Attachments Plaza dented grill piece.jpg (110KB - 38 downloads)
Attachments Plaza grill pieces.jpg (140KB - 35 downloads)
Attachments Plaza grill brackets.jpg (83KB - 40 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-01 2:33 PM (#534963 - in reply to #534934)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I taped off the ridges on the grill center to reshoot the grooves black.



(Plaza grill center.jpg)



Attachments
----------------
Attachments Plaza grill center.jpg (139KB - 37 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-03 3:34 PM (#535088 - in reply to #534963)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I did relocate the fuse block to the driver's side kick panel. Much easier once I got the whole dash out.



(Plaza fuse block.jpg)



Attachments
----------------
Attachments Plaza fuse block.jpg (183KB - 36 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-03 3:36 PM (#535089 - in reply to #535088)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I've also spent a lot of time putting convolute tubing around the wires to avoid chaffing and cutting.



(Plaza wiring protection.jpg)



(php6xEsgaPM.jpg)



Attachments
----------------
Attachments Plaza wiring protection.jpg (187KB - 39 downloads)
Attachments php6xEsgaPM.jpg (120KB - 36 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-05 2:24 PM (#535210 - in reply to #535089)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Too cold in the garage this weekend, so I brought the grill pieces into the family room and assembled it inside where it's warm.



(Plaza Grill.jpg)



Attachments
----------------
Attachments Plaza Grill.jpg (68KB - 40 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2017-03-05 6:19 PM (#535218 - in reply to #534415)
Subject: RE: '55 Plaza Suburban arrives today



Expert

Posts: 2193
2000100252525
Location: Lower Mainland BC
I wonder if you will like the Volt meter better than the AMP meter.

That speedo brings back memories. Like me being a 16 or 17 year old and getting my old 55 Dodge Regent (Canadian Plodge) flat head 6, 3 on the tree, up to 85 mph. At night. With at least three passengers. All of us could have died. What an idiot. At least it was Saskatchewan and the road was straight.



Edited by 56D500boy 2017-03-05 6:21 PM




(PhotoFlip2.jpg)



Attachments
----------------
Attachments PhotoFlip2.jpg (50KB - 44 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-05 8:07 PM (#535226 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I thought about putting a higher capacity amp meter in, as I felt sure the original ammeter couldn't handle the output of the new Delco alternator. However, from what I read, the voltmeter is much safer.
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-06 4:10 PM (#535290 - in reply to #535226)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I installed the grill on the car today as well as the headlight bezels and NOS turn signal lens.




(Plaza grill TS lens installed.jpg)



Attachments
----------------
Attachments Plaza grill TS lens installed.jpg (115KB - 38 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2017-03-06 7:33 PM (#535305 - in reply to #535290)
Subject: Re: '55 Plaza Suburban arrives today



Expert

Posts: 2193
2000100252525
Location: Lower Mainland BC
Looking good. I just installed a cleaner/clearer park light lens in my 56 Dodge and it looks much better. Carry on the good work.

I like the fuse panel that you installed but I am a bit afraid of the work to install it.

Top of the page Bottom of the page
71charger_fan
Posted 2017-03-06 8:26 PM (#535308 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
It's not difficult, just tedious. Would have been easier if I'd just yanked out the entire dashboard to start with. The American Autowire kit came with more than enough wire for everything but the right rear tail light and that's only because I have a wagon and had to route the wiring up and over the tailgate. The only circuit I needed that wasn't provided for was back up lights. I took power from a fused accessory port and ran it to the back up lamp switch, then ran power from the switch to the back up lamps which ground through their sockets. I did buy some extra wire for some of my own customization. I added two LED spot beams back by the tailgate wired to the dome lights as well as the added ground blocks. Plus extra wire to make up for the extra wire run distance in a wagon. While everything is torn apart, I'll run a few extra wires from behind the dash to different parts of the car but not hook them up to anything. Just have them available if I, or a future owner, decide to add accessories such as lights or amplifiers in the future.
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-07 1:56 PM (#535362 - in reply to #535308)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I forgot that, since I have a wagon with the two wire fuel sender, I also had to run an extra wire to the rear of the car for that second wire.
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-07 2:56 PM (#535364 - in reply to #535362)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I've got the dash back in but now need to figure out why the wipers don't work.




(Plaza dash in.jpg)



(Plaza radio check.jpg)



Attachments
----------------
Attachments Plaza dash in.jpg (100KB - 40 downloads)
Attachments Plaza radio check.jpg (124KB - 41 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-15 12:59 PM (#535996 - in reply to #535364)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Just ordered a 12V starter for a '56. I saw it on Ebay for $323, but found it on that sellers retail website for $209 with free shipping. Although the 6V starter should work just fine on 12V, I have no way of knowing how old it is.
Top of the page Bottom of the page
71charger_fan
Posted 2017-03-17 8:12 PM (#536138 - in reply to #535996)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
The starter showed up today. I found this with an internet search for Prestolite 3410 and Prestolite MDG6001.



(Plaza 12V starter.jpg)



Attachments
----------------
Attachments Plaza 12V starter.jpg (95KB - 43 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-01 9:39 PM (#537180 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Unfortunately, the new starter's nose is shaped just differently enough that I can't get it to slip into the bellhousing. The dipstick tube is in the way. Today, I pulled the nose off of the 6V starter, cleaned it, and painted it. Tomorrow, after the paint has cured, I'll swap it onto the 12V starter.
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-03 4:09 PM (#537288 - in reply to #537180)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Switched the old starter nose onto the new starter today. It was just different enough to get the new starter to pop in. I was thrilled when I turned the key and the engine turned over.



(Plaza starter nose switchover.jpg)



(Plaza starter noses.jpg)



(Plaza starter nose switched.jpg)



(Plaza new starter.jpg)



Attachments
----------------
Attachments Plaza starter nose switchover.jpg (97KB - 32 downloads)
Attachments Plaza starter noses.jpg (95KB - 35 downloads)
Attachments Plaza starter nose switched.jpg (90KB - 32 downloads)
Attachments Plaza new starter.jpg (91KB - 32 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2017-04-03 5:31 PM (#537291 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today



Expert

Posts: 3629
2000100050010025
Location: So. California
Nice job. I wouldn't have expected those to be different. Was it a difference in the heights or bolt pattern? It is very possible that they changed it just to guarantee that they wouldn't interchange because of the difference in voltage & potentials.
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-03 8:12 PM (#537309 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
It was only a difference in the shape of the nose. The nose on the left is off the '55 six volt starter. The one on the right, off the twelve volt replacement, has more of a squared off shoulder. The original is more sloped. The difference in shape kept the replacement from being able to slip into the bellhousing without hard interference from the dipstick tube.

The housing is clocked differently too. With the '55 nose on it, the new starter's power lug is on the bottom instead of on the side. My solenoid to starter cable just barely stretches.

Edited by 71charger_fan 2017-04-03 8:22 PM
Top of the page Bottom of the page
Powerflite
Posted 2017-04-04 1:26 AM (#537325 - in reply to #537309)
Subject: Re: '55 Plaza Suburban arrives today



Expert

Posts: 3629
2000100050010025
Location: So. California
I can plainly see the difference now that you point it out. I guess blindness comes in many forms
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-07 8:58 PM (#537590 - in reply to #537325)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Started on the disc brake conversion today.



(Plaza Drum.jpg)



(Plaza drum brakes.jpg)



(Plaza Spindle cleaned.jpg)



(Plaza Scarebird disc adapter.jpg)



(Plaza Scarebird Hub.jpg)



(Plaza disc installed.jpg)



Attachments
----------------
Attachments Plaza Drum.jpg (110KB - 33 downloads)
Attachments Plaza drum brakes.jpg (143KB - 33 downloads)
Attachments Plaza Spindle cleaned.jpg (124KB - 33 downloads)
Attachments Plaza Scarebird disc adapter.jpg (97KB - 30 downloads)
Attachments Plaza Scarebird Hub.jpg (106KB - 30 downloads)
Attachments Plaza disc installed.jpg (110KB - 32 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2017-04-07 9:42 PM (#537593 - in reply to #537590)
Subject: Re: '55 Plaza Suburban arrives today



Expert

Posts: 2193
2000100252525
Location: Lower Mainland BC
What kit are you using (you probably said but I missed it)?

I like the idea of separate hubs and rotors instead of rotors and hubs combined in one unit.

Top of the page Bottom of the page
71charger_fan
Posted 2017-04-07 9:48 PM (#537595 - in reply to #526294)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
I went with Scarebird because that kit required no spindle modifications. Chevy S10 4WD calipers and Ford Probe rotors.
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-08 3:48 PM (#537638 - in reply to #537595)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
One side done. This is the easy part. Installing the master cylinder/proportioning valve/new lines is still to come.




(Plaza Caliper installed.jpg)



(Plaza caliper install.jpg)



Attachments
----------------
Attachments Plaza Caliper installed.jpg (116KB - 30 downloads)
Attachments Plaza caliper install.jpg (110KB - 32 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-10 8:21 PM (#537819 - in reply to #537638)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Prying the unneeded brackets off the Cadillac brake hoses.



(Plaza brake hose1.jpg)



(Plaza brake hose2.jpg)



(Plaza brake hose3.jpg)



Attachments
----------------
Attachments Plaza brake hose1.jpg (97KB - 29 downloads)
Attachments Plaza brake hose2.jpg (93KB - 30 downloads)
Attachments Plaza brake hose3.jpg (107KB - 29 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-11 8:29 AM (#537840 - in reply to #537819)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
Time for new shocks. I bought some Gabriels for a '75 Corvette. I had to open up the slots in the mounting tabs on the shocks for the 3/8 bolts and had to remove about 1/32" on the control arm to pass the shock through. When I pulled the old shock out, it had undercoating on it and was stamped ORIFLOW, which made me think I had the original factory shocks on the front.




(Plaza shock.jpg)



(Plaza shocks.jpg)



Attachments
----------------
Attachments Plaza shock.jpg (79KB - 27 downloads)
Attachments Plaza shocks.jpg (80KB - 31 downloads)
Top of the page Bottom of the page
71charger_fan
Posted 2017-04-11 9:18 AM (#537841 - in reply to #537840)
Subject: Re: '55 Plaza Suburban arrives today


Extreme Veteran

Posts: 314
100100100
Location: Frederick, MD
One problem with the disc conversion was that, with the new hub, the outer washer stands outboard just a little farther. This negated being able to slip the cotter pin through. I wasn't having any luck finding a low profile 3/4-16 castle nut, so I set up the bearings and marked which slot on the nut needed to be deeper. Then, I just filed that slot down until I could slip the cotter pin through.



(Plaza cotter pin.jpg)



(Plaza castle nut.jpg)



(Plaza castle nut filed.jpg)



(Plaza castle nut modified.jpg)



(Plaza cotter pin2.jpg)



Attachments
----------------
Attachments Plaza cotter pin.jpg (79KB - 28 downloads)
Attachments Plaza castle nut.jpg (124KB - 30 downloads)
Attachments Plaza castle nut filed.jpg (164KB - 32 downloads)
Attachments Plaza castle nut modified.jpg (72KB - 32 downloads)
Attachments Plaza cotter pin2.jpg (89KB - 31 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2017-04-11 10:26 AM (#537850 - in reply to #537840)
Subject: Re: '55 Plaza Suburban arrives today



Expert

Posts: 3629
2000100050010025
Location: So. California
I didn't have to do anything with the control arm to install the Corvette shocks. Is the Gabriel a larger diameter than most or is the 6cyl control arm smaller than the V8 version?

Nice job on the castle nut. The Scarebird conversion for '57-'61 has a similar problem, but not as severe.
Top of the page Bottom of the page
Jump to page : < 1 2 3 4 5 6 7 >
Now viewing page 2 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)