The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Chrysler '60-'62 Turn Signal Auto Cancel Switch repair
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
wizard
Posted 2017-01-30 1:06 PM (#532694)
Subject: Chrysler '60-'62 Turn Signal Auto Cancel Switch repair



Board Moderator & Exner Expert 10K+

Posts: 13042
500050002000100025
Location: Southern Sweden - Sturkö island
I have been thaught in the basic functions of SolidWorks 3D-design program by our member and my dear friend Serge.
He has most kindly supplied me with a very nice PC packed with powerful softwares so that I can train and learn the various functions.

The very first part that I created is the turn signal auto cancel switch lever - this way my learning was given an extra dimension of practical use.

Serge also provided the very first test printout, which proved to have precise dimensions and a good fit.

The first picture shows the inside of the broken switch.

The second picture shows the broken lever.

The third Picture shows the 3D drawing.

The fourth photo shows the switch opened.

The fifth photo shows the switch with the new 3D-printed lever.

The sixth photo shows the repaired switch with the new lever.





(Cancel switch broken 25.jpg)



(Cancel switch lever broken 25.jpg)



(Cancel switch lever_25.jpg)



(Cancel switch open_25.jpg)



(Cancel switch and lever_25.jpg)



(Cancel switch_25.jpg)



Attachments
----------------
Attachments Cancel switch broken 25.jpg (117KB - 288 downloads)
Attachments Cancel switch lever broken 25.jpg (80KB - 276 downloads)
Attachments Cancel switch lever_25.jpg (42KB - 302 downloads)
Attachments Cancel switch open_25.jpg (85KB - 293 downloads)
Attachments Cancel switch and lever_25.jpg (77KB - 274 downloads)
Attachments Cancel switch_25.jpg (65KB - 268 downloads)
Top of the page Bottom of the page
di_ch_NY56
Posted 2017-01-31 8:18 AM (#532763 - in reply to #532694)
Subject: RE: Chrysler '60-'62 Turn Signal Auto Cancel Switch repair



Expert

Posts: 1527
100050025
Location: ZH, Switzerland

Hi Sven
Looks great, congratulations. Did you print out the lever of the cancel switch on a 3D printer and what material is it? I assume the slider of the stop switch ontop of the windshield wiper with two tabs is a candidate as well for a 3D repro part.

Take care,

Dieter

Top of the page Bottom of the page
wizard
Posted 2017-02-02 1:30 AM (#532949 - in reply to #532763)
Subject: Re: Chrysler '60-'62 Turn Signal Auto Cancel Switch repair



Board Moderator & Exner Expert 10K+

Posts: 13042
500050002000100025
Location: Southern Sweden - Sturkö island
Thanks' Dieter, yes, the lever is printed out on a 3D-printer. At this stage it's still a test, so the material used is not fully confirmed yet.

Also, the slider in the stop switch for the wiper motor will surely be a future project as well.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)