![]() | ||
The Forward Look Network | ||
| ||
![]() Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look NON-Technical Discussions -> Vendor Discussion | Message format |
1960-FURY![]() |
| ||
Regular Posts: 96 ![]() ![]() ![]() | Hope all is well ,, Not Sure how to ask this , is Gary doing ok ? Sent an order last December with no response back. I have ordered in past. He has always came through. | ||
| |||
Greg P.![]() |
| ||
Elite Veteran Posts: 741 ![]() ![]() ![]() ![]() Location: Oley, PA | I've heard on some of the other forums that he is dealing with some medical issues - one surgery done and at least one more still to go. As of January 2017, he temporarily stopped taking orders. No idea as to when he'll be back, but the word is optimistic that he will. This copied from the Facebook Forum: From Ian J Smale For those who don;t know what is happening with Gary: This is from Rich Barber of the Chrysler 300 Club: "Due to circulation and other problems, he had the end two joints of his left big toe amputated—the first of three major surgeries. Although the surgery went OK, he was disappointed the surgeon took two joints instead of one. Problems with his severely-damaged left ankle have necessitated replacement of his right hip joint. That surgery will be delayed for three months to make sure his body is healed enough to make the hip replacement safe. After healing from the hip replacement, he will be scheduled for amputation of his left foot below the knee. That’s the mixed news for Gary. There is light at the end of the long tunnel. For the rest of us who value Gary as a friend, as well as a provider of otherwise unobtainium items for our 300’s, the good news is that it appears there is a plan to return him to a full mobility, pain-free and productive existence and continuation of his business providing over 700 restoration items from screws to full leather seat covers. Additionally, in the interim, Gary continues the majority of his business as his limited mobility allows. He says he is catching up on back orders somewhat and is taking orders. He is molding rubber parts but trunk panel kits are on hold until warmer & dryer weather when they can be properly painted. He is working on seat sets and has a big batch of leather coming for more. New seat orders are at least a couple months out. He said he would appreciate knowing of customers wants and needs for seating and other major items in advance so he can plan to have material on hand when needed." Maybe someone has updated info? | ||
| |||
b5rt![]() |
| ||
Expert Posts: 2400 ![]() ![]() ![]() ![]() ![]() Location: central Illinois | I sent in a small order a few weeks ago and got it back in a little over a week so I believe he might be getting some help? Please note that he wishes all orders to include a 10% increase over the prices on his last list. | ||
| |||
GaryS![]() |
| ||
Elite Veteran Posts: 1005 ![]() Location: Ponder, TX | I sent a small order for rubber parts a few weeks ago and it arrived in about ten days. | ||
| |||
1960-FURY![]() |
| ||
Regular Posts: 96 ![]() ![]() ![]() | Thanks all, Great that he is doing well, Great guy and valuable asset to all ! | ||
| |||
1961plymouthfury![]() |
| ||
Expert Posts: 2279 ![]() ![]() ![]() ![]() ![]() ![]() Location: Minor Hill, TN | I ordered a trunk card board kit for my '61 and it has not arrived yet, I ordered it a month ago | ||
| |||
1961plymouthfury![]() |
| ||
Expert Posts: 2279 ![]() ![]() ![]() ![]() ![]() ![]() Location: Minor Hill, TN | I still have not received my trunk card board kit I hope Gary has fully recovered from his illness | ||
| |||
imopar380![]() |
| ||
Expert 5K+ Posts: 6677 ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Victoria, BC, on Vancouver Island, Canada | Steph give him a little more time. I believe he makes each set of these as they are ordered, and it could be difficult if he is still recovering from amputation surgery. If your order was placed and your check was cashed, you'll get them, hopefully soon | ||
| |||
1961plymouthfury![]() |
| ||
Expert Posts: 2279 ![]() ![]() ![]() ![]() ![]() ![]() Location: Minor Hill, TN | I got my trunk card board kit to day . I still wish Gary a full recovery. | ||
| |||
jboymechanic![]() |
| ||
Elite Veteran Posts: 1168 ![]() ![]() ![]() ![]() Location: Muskego, WI | I just mailed a small order before Christmas, received my trim fasteners just after New Year's. | ||
| |||
mikes2nd![]() |
| ||
Expert Posts: 2660 ![]() ![]() ![]() ![]() ![]() | I got my tail light turn signals quick. | ||
| |||
Beltran![]() |
| ||
Expert Posts: 1666 ![]() ![]() ![]() ![]() ![]() Location: Michigan | Mike M. what came of the review of taking over his business? | ||
| |||
Mike McCandless![]() |
| ||
Expert Posts: 1496 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | Waiting for him to get home from rehab, get mobile within his shop, then fly out to inspect the place. Talked to him this week. Hopefully get out there in 2-3 weeks depending on his progress. Will do an overnight to see what I'm getting into. Come up with an outline for an agreement, to see if it works for both. If it does, send someone for a week to apprentice under him for 7-10 days to learn his process's and go from there. IT's not a short process. | ||
| |||
DEH![]() |
| ||
Regular Posts: 85 ![]() ![]() ![]() Location: Falcon, CO | Mike, thanks so much for taking the time to follow up on this. I bought many small parts from Gary that were invaluable in restoring my 57 Dodge. I'm sure many others could say the same for their vehicles. It would be especially nice to see the business "stay in the family", so to speak. Don H. | ||
| |||
Mike McCandless![]() |
| ||
Expert Posts: 1496 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | There will be challenges of course. There is no formal inventory system, it's what is in his head, which is everything. Also, cost of goods vs what he's selling. It needs to be a viable business. I'll have a lot of work to do once I visit to get a true costs of goods to make sure this can function as a viable business. I have a possible location where this would work. Next trick is upholstery, as I think I have that figured out as well. A lot of variables, but I'm sure it can be worked out. What I lack in forward look knowledge, I make up for with business knowledge. We will see! | ||
| |||
mstrug![]() |
| ||
Expert 5K+ Posts: 5393 ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Newark, Texas (Fort Worth) | I and a bunch of us hope it work out. Can you imagine trying to get 'Classic, Vans, Steele, or Year One' to make these little parts? One piece windshields and backlight seals/gaskets would be great. Marc. | ||
| |||
di_ch_NY56![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: ZH, Switzerland | I just sent a fax with few part of the out of the shelf category, prepaid by PayPal. The fax's ringing but no answer. It seems the fax machine is out of work right now. God bless Gary Goers and serves him a fast recovery and a good solution for him (I know he would retire). Dieter ( 2 x #292, 2 x #310, 6 x #16 and 8 x #386) | ||
| |||
Darryl T![]() |
| ||
Veteran Posts: 208 ![]() ![]() Location: McCleary WA | I sent an order to Gary 12/1 and received it 2/5, with only one part unfilled (out of 15). Along with it was a letter from Gary detailing his health issues and stating that a helper would be filling orders from stock as much as possible, but that labor-intensive items would be a problem. He also asked that orders add 10% due to added costs that have not been reflected in his catalog prices for a long time. I know we all wish him a speedy recovery and a sale of his business if that is his best move. | ||
| |||
mikes2nd![]() |
| ||
Expert Posts: 2660 ![]() ![]() ![]() ![]() ![]() | glad to hear they are back up and running. I got mine in before Gary went to the doctor quickly. Like in two weeks but I made sure he had it all in stock. | ||
| |||
di_ch_NY56![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: ZH, Switzerland | On both orders I sent by fax (only the first, acutally the fax machine still doesn't answer) I increased the prices (at the form) by between 10 % and 25 % on my own. Good luck I added the parts (and amount) on the PayPal transfer for the second order.... Dieter | ||
| |||
di_ch_NY56![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: ZH, Switzerland | The first order I placed 01/04/18 has arriven. I was close to get tears in my eyes. Thank you very much. I wish a speedy recovery and many helping hands. Happy Restoring! Dieter | ||
| |||
hemidenis![]() |
| ||
Expert Posts: 3512 ![]() ![]() ![]() Location: Northen Virginia | I know a person who has been waiting for almost a year with a more than thousand dollars purchase...So I don't get it what's going on. | ||
| |||
mikes2nd![]() |
| ||
Expert Posts: 2660 ![]() ![]() ![]() ![]() ![]() | He may have to produce the part. That takes his time, they are filling orders of in stock items. What did they order? I got some emblems and lenses, 58 dodge turns and 57 Chrysler turns and 300c emblem | ||
| |||
Dave L.![]() |
| ||
Extreme Veteran Posts: 312 ![]() ![]() ![]() Location: Tacoma, WA | Someone shared with me that Gary had yet another surgery, and I believe that was after his letter from late 2017 where he explained, "My legs are so bad that I can barely walk at all. Even with a walker I am very limited. I've been inundated with orders for Chrysler 300 seats to do, am managing to make progress on those and will finish them all by early next year. I can still take small parts orders, but not large items such as trunk panels....I thank you for your patronage over the past decades and hope to be able to keep supplying parts..." I'm sure especially the large items and cutting and sewing leather is a real challenge when everybody probably starting flooding him with orders (including me two years ago) and just living life and getting around has become a serious, tiring challenge. But I am sure the doctors didn't remove his honestly. Edited by Dave L. 2018-02-13 11:35 PM | ||
| |||
floyd066![]() |
| ||
Extreme Veteran Posts: 330 ![]() ![]() ![]() ![]() Location: Vancouver, Wa the "Couv" | I'm not quite done with my complete restoration so having the products that Gary sells is really invaluable. No one carries parts for the 55-56 Chrysler and DeSoto cars. It's great there is some positive talk on the future of the business. I can sleep better at night. | ||
| |||
uncltank![]() |
| ||
Veteran Posts: 299 ![]() ![]() ![]() ![]() ![]() Location: Kennewick Wa | Hope all goes well for him... I got my order 2/6 after only 4 weeks. | ||
| |||
firedome![]() |
| ||
Expert Posts: 2836 ![]() ![]() ![]() ![]() ![]() ![]() Location: NY & VT | Mike M. any update on continuing the business? A lot of FL folks depend on Gary and there is no alternative for much of what he provides. Gary got his start working with and for Richard Carpenter, too bad RC can't also help with his near limitless resources and profound love of FL cars | ||
| |||
di_ch_NY56![]() |
| ||
Elite Veteran Posts: 1145 ![]() ![]() ![]() Location: ZH, Switzerland | In the first parcel was a copy of the fax with the amount I payed too much. But neither the second order nor the back transfer has arriven until now. The parts for the second order I put as a sidemark into the comment field of the money transfer (PayPal). I really don‘t know if I‘ll get the second order. Of course it‘s my fault I didn’t order ways earlier. Still I wish superb healing and recovery for Gary Goers. And a good solution to put over his business to younger hands as he wishes. Happy Restoration! Dieter | ||
| |||
antonellomopar![]() |
| ||
Extreme Veteran Posts: 340 ![]() ![]() ![]() ![]() Location: milano, italy | placed an order in september, paid with a check. No news until a week ago, when I received a partial shipment of parts. Some are still missing. Hope to get the missing parts or a refund. | ||
| |||
mstrug![]() |
| ||
Expert 5K+ Posts: 5393 ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Newark, Texas (Fort Worth) | Let us all say a prayer for for him. | ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |