The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

57 Royal with 392 project
Jump to page : 1 2 3
Now viewing page 3 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Members RidesMessage format
 
mikes2nd
Posted 2017-11-13 12:30 AM (#552131 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525

I cut the bumper off, those bolts were pretty much fused on and the bumper has a rust hole in it, it actually doesn't look bad but theres was a bad spot.

Most chromers wont give a core charge for it so its probably scrap, I used the square grind trick.

Back of the car isn't bad, got some soft spots in the trunk to handle and of course the trunk drops needs replaced. I'm pushing hard to get the body done before winter. I want to rebuild over the winter in the garage, I only have a few weeks left.



Edited by mikes2nd 2017-11-13 12:36 AM




(cutbumpersoff.jpg)



(rightrear.jpg)



(leftrear.jpg)



(polishingsucks.jpg)



Attachments
----------------
Attachments cutbumpersoff.jpg (102KB - 21 downloads)
Attachments rightrear.jpg (97KB - 21 downloads)
Attachments leftrear.jpg (198KB - 18 downloads)
Attachments polishingsucks.jpg (132KB - 19 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2017-11-17 6:03 PM (#552549 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
body comes off the frame tomorrow... as long as no rain...





(supported.jpg)



Attachments
----------------
Attachments supported.jpg (218KB - 11 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2017-11-17 10:16 PM (#552569 - in reply to #539179)
Subject: Re: 57 Royal with 392 project



Expert

Posts: 3640
2000100050010025
Location: So. California
Nice. Wish I had the space for a rotisserie. I'm jealous.
Top of the page Bottom of the page
big m
Posted 2017-11-18 10:36 AM (#552592 - in reply to #539179)
Subject: Re: 57 Royal with 392 project



Expert 5K+

Posts: 7364
500020001001001002525
Location: Williams California
Making good progress. Hope you can beat the weather!!

---John
Top of the page Bottom of the page
mikes2nd
Posted 2017-11-18 5:44 PM (#552632 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
hah I didn't...
Top of the page Bottom of the page
mikes2nd
Posted 2017-11-21 12:25 AM (#552827 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
had to wait the next day..



(offframe.jpg)



Attachments
----------------
Attachments offframe.jpg (214KB - 12 downloads)
Top of the page Bottom of the page
60 Imp
Posted 2017-11-21 7:14 AM (#552831 - in reply to #539179)
Subject: RE: 57 Royal with 392 project


2000500100100252525
Location: North Australia
You are doing that car Justice! keep up the posts and pics. I dig the timber body stand, Nice one!

Steve.
Top of the page Bottom of the page
mikes2nd
Posted 2017-11-21 9:33 PM (#552892 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
frame has Rust Bullet first coat, one more rust bullet coat and then the black shell goes on.

I actually added some more "drain" holes, after power washing the frame, I realized Chrysler doesn't really provide adequate drainage on its frames, so I drilled some low access drain holes and a couple at the ends of the rear upper shock support bar... water was pooling in there, no longer with my car and I put some rust blast in there where I could and jacked the frame back and forth to move it, I doubt I got it all though. I wonder if someone has a dip rust proofing bath? hah that wouldn't be cheap





(rustbulletcoat1.jpg)



(framestamp.jpg)



Attachments
----------------
Attachments rustbulletcoat1.jpg (249KB - 12 downloads)
Attachments framestamp.jpg (212KB - 12 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2017-11-25 12:17 AM (#553084 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
found the engine number on the frame and got the second coat of rust bullet and final coat of black shell...

it took a lot of paint... that was a 50$ can of rust bullet and half a can of black shell.





(framedone.jpg)



Attachments
----------------
Attachments framedone.jpg (311KB - 7 downloads)
Top of the page Bottom of the page
Powerflite
Posted 2017-11-25 12:43 AM (#553086 - in reply to #539179)
Subject: Re: 57 Royal with 392 project



Expert

Posts: 3640
2000100050010025
Location: So. California
And...a lot of work to clean that all up. Nice job.
Top of the page Bottom of the page
mikes2nd
Posted 2017-11-30 12:14 AM (#553413 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
rear floor pan, It just cut the whole thing out to make it easy. I could have patched it but in the end I said screw it and redid the whole thing which was easier. Passenger side is a lot better so I will figure that out.

May just do a smaller patch, seems like they rot around the upper bracket. and down in the well on the floor. those stiffening slots caught water a lot it seems.





(rearfloor.jpg)



Attachments
----------------
Attachments rearfloor.jpg (195KB - 9 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2017-12-04 11:01 PM (#553720 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
holy crap I'm grinding and cleaning... dirt and dust and crap everywhere outside... one more good day.

Ive got the underneath cleaning going, the trunk sections I need to replace mostly cut out. Trunk drops are pending and lower quarter pieces after the cleanup happens, I hope to have the entire up and down front cowl done tomorrow. I can finish welding in the garage when its warm, getting underneath rustbulleted and rustproofed.



(rustbulletandprimer.jpg)



(blackabyss.jpg)



Attachments
----------------
Attachments rustbulletandprimer.jpg (327KB - 9 downloads)
Attachments blackabyss.jpg (169KB - 9 downloads)
Top of the page Bottom of the page
mikes2nd
Posted 2017-12-17 11:36 PM (#554522 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 2272
20001001002525
putting trunk drops in to keep the shape, the C2C kind of do the job, I still need to build the patch in the front, I am replacing more metal than I thought I would but I don't willy nilly patch, I am doing most of the edges.

I still need to trim the big hole but I wanted to get the side supported, I will trim the rusty stuff back and make a big patch. I will then grind and wire wheel it all before painting.





(trunkdrop.jpg)



Attachments
----------------
Attachments trunkdrop.jpg (243KB - 1 downloads)
Top of the page Bottom of the page
Jump to page : 1 2 3
Now viewing page 3 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)