The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

57 Royal with 392 project
Jump to page : < ... 2 3 4 5 6 7 8 >
Now viewing page 8 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> Members RidesMessage format
 
mikes2nd
Posted 2020-08-02 12:22 AM (#601582 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 4241
2000200010010025
ran out of welding gas so i couldn't finish the darn driveshaft...... have to go find a solid rubber mat to make the gas tank drop a bit... I honestly could do an in tank pump... the problem is fitting it in the tank, as the top of the tank is covered. This pump should be fine for volume I think.

I do have a big pcv valve, no downdraft. I was thinking about putting an access port under the back seat to get to the gas pump heh. I will be painting any shiny bolts.
Top of the page Bottom of the page
mikes2nd
Posted 2020-08-10 2:07 PM (#601870 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 4241
2000200010010025
this is taking way to darn long...

https://www.youtube.com/watch?v=6tRj3kvaIkM
Top of the page Bottom of the page
Powerflite
Posted 2020-08-10 3:04 PM (#601877 - in reply to #539179)
Subject: Re: 57 Royal with 392 project



Expert 5K+

Posts: 6645
5000100050010025
Location: So. California
What master cylinder did you end up with? The reservoir fittings are really tall on it, but I like it otherwise.
Top of the page Bottom of the page
mikes2nd
Posted 2020-08-10 6:31 PM (#601894 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 4241
2000200010010025
its the 79-80 dodge Truck master its 1.125 bore

https://www.rockauto.com/en/moreinfo.php?pk=309581&jsn=3

https://www.cardone.com/product/10-1860-master-cylinder



Top of the page Bottom of the page
mikes2nd
Posted 2020-08-11 3:22 AM (#601913 - in reply to #539179)
Subject: Re: 57 Royal with 392 project


Expert

Posts: 4241
2000200010010025
reservoir fittings are not seated inside yet
Top of the page Bottom of the page
Jump to page : < ... 2 3 4 5 6 7 8 >
Now viewing page 8 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)