The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Renewing 56 Dodge D500 Valve Covers
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
56D500boy
Posted 2017-05-23 12:13 PM (#540719)
Subject: Renewing 56 Dodge D500 Valve Covers



Expert

Posts: 1818
1000500100100100
Location: Lower Mainland BC
I've been wanting to do this since back in September when I got my 56 D500. I finally had some good weather that I could work outside with smelly paint stripper, solvents and paint. So I got at it yesterday.

Removing the valve cover finally allowed me to see whether there was any build up of sludge in the head. There was none. Yippee!!

Renewing the valve covers involved:

1. Stripping the paint off with spray aircraft (sticky) paint stripper, a scraper and steel wool. Wear thick rubber gloves!! (Along the way, I could see at least four layers of paint, the most recent red, a silver, a black and the original red)

2. Using a drill chucked with an abrasive plastic "wire" wheel to remove tough bits.

3. Wet sanding with 200 and 400 grit wet/dry sand paper with solvent as the wetting agent.

4. Getting all the residual paint, cork gasket and hardened oil bit out of every nook and cranny with whatever it takes.

5. Repeating steps 2, 3 and 4 until there is nothing left but clean metal

6. Wiping everything with solvent and drying.

7. Spraying the covers. For the valve cover I used VHT red caliper paint (exact match, by chance, to the official Mopar red paint). For the wire covers, I used Tremclad (Rustoleum in US) semi-gloss black.

Today will involve re-installing that valve cover with a new cork gasket, new hardware (stainless), new Autolite R45S spark plugs (no gasket) and new top of tube rubber gaskets.

Then I will repeat the renewal process on the left valve cover and the power brake vacuum can.



Edited by 56D500boy 2017-05-23 2:51 PM




(315HemiValveCoverRenewal_1.jpg)



(315HemiValveCoverRenewal_2.jpg)



(315HemiValveCoverRenewal_3.jpg)



(315HemiValveCoverRenewal_4.jpg)



(315HemiValveCoverRenewal_5.jpg)



(315HemiValveCoverRenewal_6.jpg)



(315HemiValveCoverRenewal_7.jpg)



(315HemiValveCoverRenewal_8.jpg)



(315HemiValveCoverRenewal_9.jpg)



Attachments
----------------
Attachments 315HemiValveCoverRenewal_1.jpg (192KB - 26 downloads)
Attachments 315HemiValveCoverRenewal_2.jpg (188KB - 22 downloads)
Attachments 315HemiValveCoverRenewal_3.jpg (203KB - 26 downloads)
Attachments 315HemiValveCoverRenewal_4.jpg (205KB - 29 downloads)
Attachments 315HemiValveCoverRenewal_5.jpg (161KB - 25 downloads)
Attachments 315HemiValveCoverRenewal_6.jpg (199KB - 28 downloads)
Attachments 315HemiValveCoverRenewal_7.jpg (231KB - 26 downloads)
Attachments 315HemiValveCoverRenewal_8.jpg (179KB - 21 downloads)
Attachments 315HemiValveCoverRenewal_9.jpg (214KB - 26 downloads)
Top of the page Bottom of the page
DepsilonD
Posted 2017-05-23 3:25 PM (#540743 - in reply to #540719)
Subject: Re: Renewing 56 Dodge D500 Valve Covers



Elite Veteran

Posts: 685
500100252525
Location: Buena Park, CA
Nice work!
Top of the page Bottom of the page
56D500boy
Posted 2017-05-23 3:55 PM (#540747 - in reply to #540743)
Subject: Re: Renewing 56 Dodge D500 Valve Covers



Expert

Posts: 1818
1000500100100100
Location: Lower Mainland BC
Thanks, Dave. I'll get a photo of them back on the car this afternoon.

Had to get some red RTV to tack the new cork gasket in place in the valve cover. Got that this AM but no new hardware. The nuts are 5/16"-24 and they only had -18 in stainless (or plain). The bolts are 5/16"-18 but 1/2" long. They only had 1" (in SS and plain) and I didn't feel like cutting them down. I will look at a better store on another day.

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)