The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

polyurethane suspension bushings
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Steering and SuspensionMessage format
 
fireguyfire
Posted 2017-10-03 7:47 AM (#549669)
Subject: polyurethane suspension bushings


Veteran

Posts: 133
10025
I was hoping to buy a polyurethane suspension bushing kit for my 58 Chrysler; I have used them in the past on Mopar muscle cars I have restored and really liked the results.
I haven't had any luck with my initial internet searches finding them out there; does anyone know if these kits exists for this vintage of cars?
Top of the page Bottom of the page
mstrug
Posted 2017-10-03 12:29 PM (#549685 - in reply to #549669)
Subject: Re: polyurethane suspension bushings



Expert 5K+

Posts: 5148
500010025
Location: Newark, Texas (Fort Worth)
Try pst or http://www.energysuspensionparts.com/?utm_source=bingads&utm_medium...

https://p-s-t.com/

you may need to measurements for them...
Top of the page Bottom of the page
1960fury
Posted 2017-10-03 1:23 PM (#549689 - in reply to #549669)
Subject: Re: polyurethane suspension bushings



Expert

Posts: 4799
20002000500100100252525
Location: northern germany
nothing at pst. no pu bushings for 57-61. i fabricated them myself for the uca. 2 piece style. not too difficult and still cheaper than regular bushings. you will have to reuse the old hardware, so another plus, you don't have to press the outer bushing shells out.
Top of the page Bottom of the page
mikes2nd
Posted 2017-10-03 8:06 PM (#549723 - in reply to #549669)
Subject: Re: polyurethane suspension bushings


Expert

Posts: 2114
2000100
the ACdelco bushings are a newer style harness, one bushing you cant get anymore I think.

The ACDelco idler arm bushing was near poly bushing hardnes also.

I don't really know what poly bushings would get you except a bad ride, these bushings are already very thin.

The stabilizer bar bushings I got were newer harder style also, near poly.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Search for anything on eBay!

(Delete all cookies set by this site)