The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Door handle gasket
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
lozrox58
Posted 2017-10-10 11:48 PM (#550132)
Subject: Door handle gasket



Veteran

Posts: 280
100100252525
Location: Newcastle Australia
Just putting the handles back in a 59 Dodge. Is there meant to be a gasket or seal between the handle and the body to stop water getting into the door?
The spare doors don't have one and I don't see any reference in Gary Goers listing.
Top of the page Bottom of the page
56D500boy
Posted 2017-10-11 1:24 AM (#550136 - in reply to #550132)
Subject: RE: Door handle gasket



Expert

Posts: 4893
20002000500100100100252525
Location: Lower Mainland BC

The doors are not water proof and were never meant to be.

I checked the 1268 page 55-58 Mopar Parts pdf and found no evidence of a gasket either in the diagrams or the parts listings. When I temporarily removed the driver's door handle on my 56 Dodge, there was no gasket.

Check this 57-58 Door Handle Part number listing for yourself (I could be wrong) :



Edited by 56D500boy 2017-10-11 8:26 AM




(57-58DoorHandlePNs.jpg)



Attachments
----------------
Attachments 57-58DoorHandlePNs.jpg (230KB - 71 downloads)
Top of the page Bottom of the page
brdtee
Posted 2017-10-11 5:03 AM (#550138 - in reply to #550132)
Subject: Re: Door handle gasket



Veteran

Posts: 194
100252525
Location: Pieksamaki, Finland, Europe
The door handle gasket would not stop water getting into the door because water usually gets there through the window opening as the cat whisker there doesn't hold up much water.

Door being not waterproof is why there are plastic sheet between the door and the inside door panel and the drain holes at the bottom of the door.

Edited by brdtee 2017-10-11 5:12 AM
Top of the page Bottom of the page
Powerflite
Posted 2017-10-11 5:36 PM (#550165 - in reply to #550132)
Subject: Re: Door handle gasket



Expert 5K+

Posts: 5655
50005001002525
Location: So. California
Yes, but the gasket prevents you from digging into your new paint. I recommend just making some out of thin rubber sheet.
Top of the page Bottom of the page
lozrox58
Posted 2017-10-13 12:31 AM (#550226 - in reply to #550132)
Subject: Re: Door handle gasket



Veteran

Posts: 280
100100252525
Location: Newcastle Australia
Thanks guys. I figured since I couldn't find any reference that the gasket didn't exist.
I'm having a go at cutting one out of old inner tubes, as Powerflite says, just to protect the paint. My first example looks like s**t so it's in the bin and try again tomorrow.
Top of the page Bottom of the page
lozrox58
Posted 2017-10-14 3:24 AM (#550272 - in reply to #550132)
Subject: RE: Door handle gasket



Veteran

Posts: 280
100100252525
Location: Newcastle Australia
Door getting there.



(IMG_6409_S2.JPG)



Attachments
----------------
Attachments IMG_6409_S2.JPG (242KB - 66 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2019-08-02 1:44 AM (#585514 - in reply to #550136)
Subject: RE: Door handle gasket



Expert

Posts: 4893
20002000500100100100252525
Location: Lower Mainland BC
56D500boy - 2017-10-10 10:24 PM
The doors are not water proof and were never meant to be. I checked the 1268 page 55-58 Mopar Parts pdf and found no evidence of a gasket either in the diagrams or the parts listings. When I temporarily removed the driver's door handle on my 56 Dodge, there was no gasket.


Hmm... that was two years ago. I am now working on the last of the 4 drs on my 56 Dodge and now I am rethinking the need for a gasket under the "fridge" handle. PNs for the 56 Dodge (and Plymouth) door handles are 1682512 (right) and 1682513 (left).

A gasket would not keep water out of the door but it would stop the handle from digging into the door skin when the two nuts that hold the handle to the door are tightened.







(55-56DoorPartDiagramFlagging23-14-10DoorHandle.jpg)



(55-56DoorHandlePartNumbers1682512_R_and1682513_L.jpg)



Attachments
----------------
Attachments 55-56DoorPartDiagramFlagging23-14-10DoorHandle.jpg (158KB - 5 downloads)
Attachments 55-56DoorHandlePartNumbers1682512_R_and1682513_L.jpg (118KB - 5 downloads)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)