The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Unused Option Stamping
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
Powerflite
Posted 2017-11-22 11:10 AM (#552924)
Subject: Unused Option Stamping



Expert 5K+

Posts: 9604
500020002000500100
Location: So. Cal
I noticed this stamping in the firewall of my '57 New Yorker and wondered what it was for. I looked around and found the same stamping on my '58 Dodge and '60 New Yorker too. Under the dash there is a cutout in the firewall insulation too. What is this cutout used for? I might have thought it was used for a manual shifter, but I think it is too high for that. Could it be used for the clutch? The location is really close to the power booster so it can't take up too much room in the engine bay.



(Option Stamping.jpg)



(Option Insulation Cutout.jpg)



Attachments
----------------
Attachments Option Stamping.jpg (170KB - 141 downloads)
Attachments Option Insulation Cutout.jpg (175KB - 107 downloads)
Top of the page Bottom of the page
58coupe
Posted 2017-11-23 10:44 AM (#552985 - in reply to #552924)
Subject: Re: Unused Option Stamping



Expert

Posts: 1739
100050010010025
Location: Alaska
The bracket for the clutch pedal attaches to the left side of the brake pedal and to the firewall at that cutout.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)