The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

341 Hemi
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
FINS!
Posted 2018-01-10 11:52 PM (#556031)
Subject: 341 Hemi


Elite Veteran

Posts: 943
50010010010010025
Looking for a 341 hemi that runs or at least turns over
Top of the page Bottom of the page
mstrug
Posted 2018-01-11 4:53 AM (#556034 - in reply to #556031)
Subject: Re: 341 Hemi



Expert 5K+

Posts: 6487
50001000100100100100252525
Location: Newark, Texas (Fort Worth)
U OW MI:

https://statesboro.craigslist.org/pts/d/1957-hemi-firedome-341-engin...
Top of the page Bottom of the page
FINS!
Posted 2018-01-11 9:52 PM (#556079 - in reply to #556031)
Subject: RE: 341 Hemi


Elite Veteran

Posts: 943
50010010010010025
Yeah that's a 330. I talked to the seller was all set to buy it but something didn't look right, I had him check the engine number S22-xxxx
Top of the page Bottom of the page
mstrug
Posted 2018-01-12 5:55 AM (#556091 - in reply to #556031)
Subject: Re: 341 Hemi



Expert 5K+

Posts: 6487
50001000100100100100252525
Location: Newark, Texas (Fort Worth)
Bummer. Don't you dislike people that don't know what they have or 'Change their Minds'? I was looking at some 1958 Belvedere 2 door Hardtop door panels and the seller decided not to sell. Hmmmm, I dislike those kind of people.
Top of the page Bottom of the page
RUSTORICHES
Posted 2018-01-12 9:20 AM (#556095 - in reply to #556031)
Subject: Re: 341 Hemi


Extreme Veteran

Posts: 494
100100100100252525
Location: Alberta
This Hemi is a little smaller and of coarse Strictly Canadian……..LOL This may be a an option if all else fails

https://www.kijiji.ca/v-view-details.html?adId=1319903957&requestSou...



($_59-1.JPG)



Attachments
----------------
Attachments $_59-1.JPG (165KB - 87 downloads)
Top of the page Bottom of the page
FINS!
Posted 2018-01-13 1:05 PM (#556157 - in reply to #556031)
Subject: RE: 341 Hemi


Elite Veteran

Posts: 943
50010010010010025
The "I don't want to sell it now" can be really really annoying if it's something you have been looking for for a long time. On this I'm just glad I had him check the engine numbers before I bought it....... This is for a '57 Desoto so has to be a 341
Top of the page Bottom of the page
mobileparts
Posted 2018-01-25 2:24 PM (#556914 - in reply to #556031)
Subject: Re: 341 Hemi


Veteran

Posts: 253
1001002525
I have 1 remaining factory sealed FEL PRO Full Set of Gaskets for the 1 year only 1957 Desoto 341 engine, if you need.......
Call me -- Craig -- 516 - 485 - 1935 ..... Long Island, New York......
Top of the page Bottom of the page
FINS!
Posted 2018-01-25 10:20 PM (#556934 - in reply to #556031)
Subject: RE: 341 Hemi


Elite Veteran

Posts: 943
50010010010010025
Thanks once I get a motor will contact you
Top of the page Bottom of the page
mobileparts
Posted 2018-01-31 2:27 PM (#557273 - in reply to #556031)
Subject: Re: 341 Hemi


Veteran

Posts: 253
1001002525
I had a spare motor & tranny from 1 of my 1957 DeSotos -- when I made 2 out of 3.........
Had it available for years ........ timing is everything.........
sold it to a guy who was going to put all of that into a rolling chassis of a 1936 Ford...........
Top of the page Bottom of the page
NM Desoto
Posted 2018-01-31 5:39 PM (#557288 - in reply to #556031)
Subject: RE: 341 Hemi


Veteran

Posts: 145
10025
I have a couple of them that have been disassembled for storage. Are you looking for an S25 or S26 block?
Top of the page Bottom of the page
FINS!
Posted 2018-02-01 9:18 PM (#557356 - in reply to #556031)
Subject: RE: 341 Hemi


Elite Veteran

Posts: 943
50010010010010025
S25 if possible, more concerned with condition of motor. Mine stuck hard......
Top of the page Bottom of the page
NM Desoto
Posted 2018-02-02 8:16 PM (#557414 - in reply to #557356)
Subject: RE: 341 Hemi


Veteran

Posts: 145
10025
They were torn down to inspect the components for wear / damage and to more easily store them in the garage. They have standard cranks and bores, but i wouldn't want to
put them back together without boring the blocks or grinding the cranks. Have you torn your's down to determine what is damaged?
Top of the page Bottom of the page
FINS!
Posted 2018-02-04 12:23 AM (#557473 - in reply to #556031)
Subject: RE: 341 Hemi


Elite Veteran

Posts: 943
50010010010010025
I have not. I'm not looking to do a full rebuild on an engine as that's 5k around here. I am guessing mine is seized due to rus.t It was stored dry indoors though but has not run since 1965. I will disassemble mine and see if I can get it to turn but I'd like to have another motor lined up and keep my old one as a spare.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)