The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

325 Engine
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
FINS!
Posted 2018-02-27 10:02 AM (#558907)
Subject: 325 Engine


Elite Veteran

Posts: 656
5001002525
Anyone have a running 325 Poly engine or one that at least turns over?
Top of the page Bottom of the page
Darryl T
Posted 2018-02-27 12:22 PM (#558916 - in reply to #558907)
Subject: RE: 325 Engine



Veteran

Posts: 214
100100
Location: McCleary WA
Location? I have one in a '57 Dodge, located in WA. I will be pulling it in a few months.
Top of the page Bottom of the page
FINS!
Posted 2018-02-27 7:40 PM (#558943 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
Chicago area. I guess it could be shipped Fastenal. I've had good luck with them. What condition is it in?
Top of the page Bottom of the page
Darryl T
Posted 2018-02-28 11:57 AM (#558978 - in reply to #558943)
Subject: RE: 325 Engine



Veteran

Posts: 214
100100
Location: McCleary WA
It was sold in November as a "runner" but I was unable to get it to start (didn't try hard). I'll know more in a few weeks as I pull the front clip off and have easier access to it. Too bad you are so far away, I think shipping would exceed its value.
Top of the page Bottom of the page
Rebels-59
Posted 2018-02-28 12:01 PM (#558979 - in reply to #558907)
Subject: Re: 325 Engine



Board Moderator & Exner Expert 10K+

5000500020001001002525
Location: .Norfolk..Mafia.. ,England UK
Also ask John (Big M) here on the forum ...

http://forwardlook.net/forums/forums/thread-view.asp?tid=6355&start...
Top of the page Bottom of the page
FINS!
Posted 2018-03-01 2:06 PM (#559047 - in reply to #558978)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
Ok thanks let me know when you have the front clip off and know more. I'm sure I'll have to pay to ship one so I'm not too concerned about that.
Top of the page Bottom of the page
mikes2nd
Posted 2018-03-01 2:41 PM (#559050 - in reply to #558907)
Subject: Re: 325 Engine


Expert

Posts: 2916
2000500100100100100

ive got a Plymouth 313 : from a 58 Plymouth that turns over I gave away a froze up 325 block

I have spare heads, valve covers, intake/carb and water pump from a 325 if you need. and a3 speed trans



Edited by mikes2nd 2018-03-01 2:43 PM
Top of the page Bottom of the page
springsweptwing
Posted 2018-03-01 3:15 PM (#559055 - in reply to #558907)
Subject: Re: 325 Engine



Elite Veteran

Posts: 1028
100025
Location: Blackpool, United Kingdom.
Need a pair of exhaust manifolds if any going spare, thanks.
Top of the page Bottom of the page
mikes2nd
Posted 2018-03-01 4:08 PM (#559062 - in reply to #558907)
Subject: Re: 325 Engine


Expert

Posts: 2916
2000500100100100100
I will check I may have sold, I know I sold the cam, I have an original y pipe in good shape.
Top of the page Bottom of the page
FINS!
Posted 2018-03-02 1:28 AM (#559096 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
I bet I have the ones off my old frozen engine if Mike does not. And other 325 parts, heads and such if anyone needs them
Top of the page Bottom of the page
FINS!
Posted 2018-03-02 1:30 AM (#559097 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
Might be interested in that 58 Plymouth motor too
Top of the page Bottom of the page
Swept57
Posted 2018-03-14 9:31 PM (#559917 - in reply to #559050)
Subject: Re: 325 Engine



Expert

Posts: 1575
1000500252525
Location: Berea, OH / Maricopa, AZ
mikes2nd - 2018-03-01 2:41 PM

ive got a Plymouth 313 : from a 58 Plymouth that turns over I gave away a froze up 325 block

I have spare heads, valve covers, intake/carb and water pump from a 325 if you need. and a3 speed trans



3 speed auto or manual?
Top of the page Bottom of the page
FINS!
Posted 2018-03-16 12:14 PM (#560010 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
I have one exhaust manifold. My motor is pretty complete except for Passenger side head so if anyone needs parts let me know. I haven't bought a motor yet but I'm not going to use this one.
Top of the page Bottom of the page
mikes2nd
Posted 2018-03-16 1:18 PM (#560016 - in reply to #558907)
Subject: Re: 325 Engine


Expert

Posts: 2916
2000500100100100100
i don't have exhaust manifolds
Top of the page Bottom of the page
springsweptwing
Posted 2018-03-16 2:29 PM (#560020 - in reply to #560016)
Subject: Re: 325 Engine



Elite Veteran

Posts: 1028
100025
Location: Blackpool, United Kingdom.
Hi Garrett,

Is it the drivers side manifold you have , and what price

Thanks Paul.
Top of the page Bottom of the page
FINS!
Posted 2018-03-18 10:31 PM (#560133 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
Almost positive I have the Driver's side. $75?
Top of the page Bottom of the page
Darryl T
Posted 2018-03-29 10:07 PM (#560699 - in reply to #559047)
Subject: RE: 325 Engine



Veteran

Posts: 214
100100
Location: McCleary WA
Engine is out now. It turns over freely with a socket and breaker bar, and seems to have good compression. Other than that, no guarantees. Includes 2 bbl carb, starter, exhaust manifolds, water pump, air cleaner (except outer cover is missing). As noted earlier the guy I got the car from claimed it was a runner. I need it gone - how about $200, on a pallet, delivered to a shipper of your choice?


Edited by Darryl T 2018-03-29 10:20 PM




(57 motor & trans 001-1.jpg)



(57 motor & trans 003-1.jpg)



(57 motor & trans 005-1.jpg)



(57 motor & trans 008-1.jpg)



Attachments
----------------
Attachments 57 motor & trans 001-1.jpg (239KB - 19 downloads)
Attachments 57 motor & trans 003-1.jpg (247KB - 26 downloads)
Attachments 57 motor & trans 005-1.jpg (206KB - 22 downloads)
Attachments 57 motor & trans 008-1.jpg (200KB - 21 downloads)
Top of the page Bottom of the page
FINS!
Posted 2018-03-29 10:22 PM (#560701 - in reply to #560699)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
That's great, thanks, I just sent you a PM
Top of the page Bottom of the page
Darryl T
Posted 2018-04-19 12:30 PM (#561891 - in reply to #560701)
Subject: RE: 325 Engine



Veteran

Posts: 214
100100
Location: McCleary WA
Please check your PMs. Engine is crated and has been ready to ship since 4/2. Please advise when you are ready for it as I need it out of my way.
Top of the page Bottom of the page
FINS!
Posted 2018-04-19 3:22 PM (#561904 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
Sent ya a PM
Top of the page Bottom of the page
oldwood
Posted 2018-07-07 11:12 PM (#566250 - in reply to #558907)
Subject: Re: 325 Engine


Expert

Posts: 2776
2000500100100252525
Location: little rock, AR
I'm parting out a '59 Dodge which has a complete engine but its locked up.
Top of the page Bottom of the page
FINS!
Posted 2018-07-14 9:31 PM (#566606 - in reply to #558907)
Subject: RE: 325 Engine


Elite Veteran

Posts: 656
5001002525
I found one already but thanks
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)