The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Fan Shroud with a 392 water pump on a 56 Windsor
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> General Technical Discussion and TroubleshootingMessage format
 
floyd066
Posted 2018-04-14 10:03 PM (#561639)
Subject: Fan Shroud with a 392 water pump on a 56 Windsor



Extreme Veteran

Posts: 333
10010010025
Location: Vancouver, Wa the "Couv"
I have a 56 Windsor with a 56 radiator. I have a 392 water pump installed with the power steering on one side and an alternator on the other. That's all good, I tried to reinstall the fan shroud around the fan and bolting it to its brackets. The upper shroud fits fine but with a larger gap between the fan and the shroud. The lower shroud, I can't get to even come close to connecting to the brackets, the fan is sitting lower. The only thing that has changed in this situation is the water pump holding the fan. Does the 392 have a fan shroud? I am a little perplexed.
Top of the page Bottom of the page
mikes2nd
Posted 2018-04-14 10:54 PM (#561645 - in reply to #561639)
Subject: Re: Fan Shroud with a 392 water pump on a 56 Windsor


Expert

Posts: 2760
20005001001002525
we don't need no stinking fan shrouds

https://www.youtube.com/watch?v=Bf_VieV5l2k

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread


(Delete all cookies set by this site)