The Forward Look Network | ||
| ||
Confirmed big block mopar headers that fit! Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Technical Discussions -> The Exhaust Pipe - Modification & Performance | Message format |
Cataldo |
| ||
Regular Posts: 50 Location: Apple Valley, CA | Ok so on my 1959 Dodge Sierra Spectator I have a 440. I rolled the dice on the $90+ ebay shorty block hugger headers. They look great except the flange is warped BAD! I mean like close to an 1/8". I figured it was still worth a try. They fit great with exhaust studs and clear the power steering box no problem. They sinched up tight and with lock washers are not going anywhere. | ||
Cataldo |
| ||
Regular Posts: 50 Location: Apple Valley, CA | Ok I can not get my pictures to upload on here from my phone. If anyone cares I can send you them | ||
Powerflite |
| ||
Expert 5K+ Posts: 9604 Location: So. Cal | I care. Are you talking about the versions with collectors pointing down, or with collectors pointing down and back? | ||
Cataldo |
| ||
Regular Posts: 50 Location: Apple Valley, CA | https://m.ebay.com/itm/Shorty-Exhaust-Headers-Fits-Dodge-Chrysler-Pl... | ||
Cataldo |
| ||
Regular Posts: 50 Location: Apple Valley, CA | Powerflite, I emailed you two pictures. Post them here if you can please | ||
57chizler |
| ||
Expert Posts: 3768 Location: NorCal | A friend got those and had spark plug clearance issues on two cylinders. | ||
Powerflite |
| ||
Expert 5K+ Posts: 9604 Location: So. Cal | Here are your pictures. You just needed to make them smaller to be able to post them up - less than 250Mb is the limit. I am wondering if the shorty headers that have the collectors pointing toward the back will fit on our cars. Anyone know? (20180428_174235.jpg) (20180428_174252.jpg) Attachments ---------------- 20180428_174235.jpg (163KB - 367 downloads) 20180428_174252.jpg (168KB - 358 downloads) | ||
BigBlockMopar |
| ||
Expert Posts: 3575 Location: Netherlands | Some 11 years ago I started posting this image online of the pair of angled-back shorties I'm running on my '60 New Yorker; https://www.bigblockmopar.nl/enginebuilds/496ci-bigblock-mopar-long-... http://www.forwardlook.net/forums/forums/thread-view.asp?tid=57039&... | ||
Powerflite |
| ||
Expert 5K+ Posts: 9604 Location: So. Cal | So they work? Good news, because I like that design better. I didn't pay much attention to big blocks back then because I didn't own any at the time. I got my first one with the '58 DeSoto and now again with my '60 New Yorker. Edited by Powerflite 2018-05-04 7:16 PM | ||
57chizler |
| ||
Expert Posts: 3768 Location: NorCal | Notice the difference between the E-bay offering and Herman's, on Herman's the front and rear tubes sweep up to clear the plugs and the E-bay offering has the front/rear tubes come straight out of the flanges. | ||
1960fury |
| ||
Expert 5K+ Posts: 7385 Location: northern germany | that hedman shorty does NOT fit lowdeck bigblocks in unibodys and the collector is a crappy design that needs to be changed. i cut mine appart and changed it completely so the pipes do not bend down just after the exhaust ports and the collector is on the outer side of the T-bars, like stock. could have build one from scratch for less money. to the op, i'm not yet convinced, i guess the problem will be the exhaust pipe from the headers. | ||
Cataldo |
| ||
Regular Posts: 50 Location: Apple Valley, CA | I have no spark plug clearance issues. Im running 90* boots for what its worth. These ebay ones are short, which helps with getting everything to fit | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |