The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

head gasket with one side metal
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
lonesome mopar
Posted 2018-05-16 11:16 AM (#563509)
Subject: head gasket with one side metal



Extreme Veteran

Posts: 397
100100100252525
Location: Milano, Italy

Hello

I have these two head gaskets which I don't remember anymore the maker but they have fiber on one side and metal on the other.

Does anybody know which side hoes towards the head ?

thanks for any hint !

Top of the page Bottom of the page
57chizler
Posted 2018-05-16 3:29 PM (#563526 - in reply to #563509)
Subject: RE: head gasket with one side metal



Expert

Posts: 3768
200010005001001002525
Location: NorCal
If there is no marking as to the direction, it doesn't matter.

https://www.youtube.com/watch?v=9RQTgEqnYJE
Top of the page Bottom of the page
Mopar1
Posted 2018-05-16 6:12 PM (#563534 - in reply to #563509)
Subject: Re: head gasket with one side metal



Expert

Posts: 3027
2000100025
Location: N.W. Fla.
Set it on the block or head & see if everything matches up. The Fel-Pro ones I just put on my 331 are as described & went on one way only.
Top of the page Bottom of the page
Mopar1
Posted 2018-05-16 6:14 PM (#563535 - in reply to #563509)
Subject: Re: head gasket with one side metal



Expert

Posts: 3027
2000100025
Location: N.W. Fla.
Probably should use spray on Copper-Kote on the metal side. Lay it flat so it doesn't run.
Top of the page Bottom of the page
lonesome mopar
Posted 2018-05-17 12:01 PM (#563566 - in reply to #563509)
Subject: Re: head gasket with one side metal



Extreme Veteran

Posts: 397
100100100252525
Location: Milano, Italy
I just got a reply from the Summitracing technical assistance and they say the metal side goes towards the block.
I share this info with you all as it could alwways come handy.
Top of the page Bottom of the page
lonesome mopar
Posted 2018-05-17 12:02 PM (#563567 - in reply to #563509)
Subject: Re: head gasket with one side metal



Extreme Veteran

Posts: 397
100100100252525
Location: Milano, Italy
I just got a reply from the Summitracing technical assistance and they say the metal side goes towards the block.
I share this info with you all as it could always come handy.
I acknowledge to the courtesy of the Summit racing tech dept.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)