The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Removing Heater Box on firewall 1957 Plymouth factory air
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Heating, Cooling and Air ConditioningMessage format
 
Daryla1933
Posted 2018-05-24 9:07 PM (#563992)
Subject: Removing Heater Box on firewall 1957 Plymouth factory air


Member

Posts: 41
25
Hi, all.

Don't mean to sound like a complete moron, but I'm having a little trouble removing the heater box from my Plymouth - all the bolts on the firewall are out but the core itself doesn't budge. This fiberglass box seems so fragile I'm afraid of cracking it. Any suggestions, please. Thank you.

Daryl
Top of the page Bottom of the page
Lancer Mike
Posted 2018-05-24 10:26 PM (#563997 - in reply to #563992)
Subject: RE: Removing Heater Box on firewall 1957 Plymouth factory air



500020001000100100100100252525
Location: The Mile High City

put a putty knife in to work on that seal.  DON'T PRY, just try to work the seal loose from the firewall.  Good Luck!  Should come off.



Edited by Lancer Mike 2018-05-24 10:28 PM
Top of the page Bottom of the page
Daryla1933
Posted 2018-05-24 10:51 PM (#563998 - in reply to #563992)
Subject: Re: Removing Heater Box on firewall 1957 Plymouth factory air


Member

Posts: 41
25
Thx, Mike. I am working it carefully with a plastic putty knife. The housing is loose but the cores aren’t moving with it. Can’t figure out what’s up with that!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)