|
|
Veteran
Posts: 112
Location: lafayette,La. | I saw where Speedway motors had a Disc Brake kit all the parts and a adapter for mounting it . The kit is for 1978 -88 GM to Early Fords 5on 4.5" wheel bolt pattern. The adapter look like the same as the spindle bolt pattern. I am not at my shop now to measure an see if it is the same and was wondering if anyone else had looked at the kit # 91031945. I have enclosed a picture of the adapter plate. Thanks For any input. Jerry
(IMG_1510.JPG)
Attachments ---------------- IMG_1510.JPG (30KB - 112 downloads)
|
|
|
|
Expert 5K+
Posts: 9654
Location: So. Cal | No, but let us know what you find with it. What is the motivation to using it instead of other conversions? |
|
|
|
Veteran
Posts: 112
Location: lafayette,La. | The kit is less than $300 and includes the calipers and disc brake and all the hose and hardware that could go on an adapter like the one at AAJ brakes. Thanks Jerry |
|
|
|
Expert 5K+
Posts: 8947
Location: WHEELING,WV.>>>HOME OF WWVA | i bought a kit from ebay when rear disc conversion were complete , cables and all for @500$ . since then they've gone up a bit . not installed yet--------------------------------------------------------later
|
|
|