The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Generator Data Plate
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Electrical, Battery and ChargingMessage format
 
rebel
Posted 2018-08-03 7:45 PM (#567752)
Subject: Generator Data Plate


Veteran

Posts: 161
1002525
Location: Western Colorado
Does anyone know if these are being reproduced by anyone in the USA. I waited for 6 months to finally hear back from Gary that he is sold out!
This would be for a 58 New Yorker, 12 volt, green plate.
Thanks
Top of the page Bottom of the page
Powerflite
Posted 2018-08-03 8:35 PM (#567761 - in reply to #567752)
Subject: Re: Generator Data Plate



Expert

Posts: 4544
2000200050025
Location: So. California
I know of a guy in Poland and another guy in Holland. No one in the US. They will stamp them and bend them to the proper shape for you too if you ask them.
Top of the page Bottom of the page
rebel
Posted 2018-08-03 10:25 PM (#567771 - in reply to #567752)
Subject: RE: Generator Data Plate


Veteran

Posts: 161
1002525
Location: Western Colorado
Thanks Nathan. I had found the guy in Poland but was hoping to find something quicker. His won't get here till as late as Sept. 11th.
Bob
Top of the page Bottom of the page
56D500boy
Posted 2018-08-03 10:52 PM (#567774 - in reply to #567752)
Subject: RE: Generator Data Plate



Expert

Posts: 3376
20001000100100100252525
Location: Lower Mainland BC
I found and bought one on eBay recently. Turns out to be from Poland. Same as my 56 Dodge's generator plate but not faded.

https://www.ebay.ca/itm/12V-CHRYSLER-GENERATOR-DATA-PLATE-DODGE-PLYM...





Edited by 56D500boy 2018-08-03 11:06 PM




(DaveForgiesGJC7006B_casing_Closeup.jpg)



Attachments
----------------
Attachments DaveForgiesGJC7006B_casing_Closeup.jpg (163KB - 1 downloads)
Top of the page Bottom of the page
dlyle
Posted 2018-08-03 11:32 PM (#567776 - in reply to #567752)
Subject: Re: Generator Data Plate



Veteran

Posts: 205
100100
Location: Morgan Hill, CA
The guy that converted my generator to an alternator had them as of a few months ago.

http://www.gener-nator.com/

Edited by dlyle 2018-08-03 11:34 PM




(gen tag.jpg)



Attachments
----------------
Attachments gen tag.jpg (52KB - 2 downloads)
Top of the page Bottom of the page
rebel
Posted 2018-08-04 2:13 PM (#567799 - in reply to #567752)
Subject: RE: Generator Data Plate


Veteran

Posts: 161
1002525
Location: Western Colorado
Doug,
Did Don Allen stamp the plate for you? I pulled the plate off my spare 1956 generator this morning. The numbers are 3/32 tall and of course I don't have that size.
I'll call Don Allen on Monday and see if he will sell me just the plate.
Thanks Guys!
Bob

Nice Desoto Doug!!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)