The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

The "miracle" of AutoSol metal polish
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
56D500boy
Posted 2018-08-11 5:26 PM (#568247)
Subject: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
I am in the process of replacing the window channels and cat's whiskers in my right rear door. To do so, you can elect to remove and clean up and paint the frame that holds the rear channel and vent window. I did that yesterday. While it was out, I decided to polish the chrome frame of the vent window using AutoSol. Man I love that stuff. Very little effort with big results. The first go was wonderful. The second go was astonishing. Great stuff. (At least for a driver, maybe not a show car).

Some photos:





(RightRearVentWindowBeforePolishing.jpg)



(RightRearVentWindow_AfterQuickGoWithAutoSol.jpg)



(RightRearVentWindow_AfterSecondGoWithAutoSol.jpg)



Attachments
----------------
Attachments RightRearVentWindowBeforePolishing.jpg (132KB - 149 downloads)
Attachments RightRearVentWindow_AfterQuickGoWithAutoSol.jpg (137KB - 146 downloads)
Attachments RightRearVentWindow_AfterSecondGoWithAutoSol.jpg (124KB - 144 downloads)
Top of the page Bottom of the page
ttotired
Posted 2018-08-11 6:22 PM (#568253 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 8443
50002000100010010010010025
Location: Perth Australia
Brilliant stuff but be careful, its abrasive, so not really good for chrome

That said, I do the same

There is another polish I have heard of, but not tried called "Purple Polish" Truckies over here love it, they say its better than autosol



Top of the page Bottom of the page
1960fury
Posted 2018-08-11 8:40 PM (#568263 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 7385
50002000100100100252525
Location: northern germany
I have a story to share about that stuff. Bought a pit free door handle, polished it with Autosol, then wrapped it in a dry rag, the same rag I used to polish the handle, stored it in a heated and dry room, that never saw any moisture.... years later i unwrapped it and the chrome was completely pitted. To this day I wonder what happened.

Edited by 1960fury 2018-08-11 8:41 PM
Top of the page Bottom of the page
56D500boy
Posted 2018-08-12 1:48 AM (#568275 - in reply to #568263)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
1960fury - 2018-08-11 8:40 PM
I have a story to share about that stuff. Bought a pit free door handle, polished it with Autosol, then wrapped it in a dry rag, the same rag I used to polish the handle, stored it in a heated and dry room, that never saw any moisture.... years later i unwrapped it and the chrome was completely pitted. To this day I wonder what happened.


I think that the culprits in your story are the covering (rag) and the humidity. You probably needed to store it in something with silica gel to absorb the airborne moisture.

I don't want to argue but I think that what you think is "dry" and what really is dry isn't actually the same thing. I lived for a time in Hamburg in the fall/winter of 1986/87 and I know that it is humid there (not sure exactly where you are in "Northern Germany"). Dry to us in North America is more like Phoenix Arizona.

Average humidity in Hamburg vs Phoenix Arizona (about half to less than a third of the Hamburg humidity):

Top of the page Bottom of the page
60 dart
Posted 2018-08-12 4:59 AM (#568279 - in reply to #568263)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 8947
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA
1960fury - 2018-08-11 8:40 PM

I have a story to share about that stuff. Bought a pit free door handle, polished it with Autosol, then wrapped it in a dry rag, the same rag I used to polish the handle, stored it in a heated and dry room, that never saw any moisture.... years later i unwrapped it and the chrome was completely pitted. To this day I wonder what happened.




i've done pretty much the same . just thinkin about this subject the other day ---------------------------------------------------later
Top of the page Bottom of the page
1960fury
Posted 2018-08-12 7:20 AM (#568286 - in reply to #568275)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 7385
50002000100100100252525
Location: northern germany
56D500boy - 2018-08-12 1:48 AM

1960fury - 2018-08-11 8:40 PM
I have a story to share about that stuff. Bought a pit free door handle, polished it with Autosol, then wrapped it in a dry rag, the same rag I used to polish the handle, stored it in a heated and dry room, that never saw any moisture.... years later i unwrapped it and the chrome was completely pitted. To this day I wonder what happened.


I think that the culprits in your story are the covering (rag) and the humidity. You probably needed to store it in something with silica gel to absorb the airborne moisture.

I don't want to argue but I think that what you think is "dry" and what really is dry isn't actually the same thing. I lived for a time in Hamburg in the fall/winter of 1986/87 and I know that it is humid there (not sure exactly where you are in "Northern Germany"). Dry to us in North America is more like Phoenix Arizona.

Average humidity in Hamburg vs Phoenix Arizona (about half to less than a third of the Hamburg humidity):



Yes, I actually live in a very moist area but that building is a heated wooden house, very dry, I store bare sheet metal there, not oiled, not a trace of rust after many years. Other chromed pot metal parts, not wrapped in an Autosol soaked rag, never showed any pitting. My car is parked in an unheated garage for 30 years. It is so wet, water runs down from my car in winters, yet, the pot metal/chrome still looks like the day I bought it.

Edited by 1960fury 2018-08-12 7:21 AM
Top of the page Bottom of the page
finsruskw
Posted 2018-08-12 8:08 AM (#568288 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish


Expert

Posts: 2289
2000100100252525
Location: Eastern Iowa
I think any old Turtle wax or similar type chrome polish would have done the same thing.
See my ad for 57 Windsor window frames. although they were not as bad off as yours in the pictures you posted.
That's what I have been using for decades on the chrome on all my cars.
Top of the page Bottom of the page
mikes2nd
Posted 2018-08-12 8:56 AM (#568291 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish


Expert 5K+

Posts: 5006
5000
i like "Quick Glo" for polishing chrome.

https://www.youtube.com/watch?v=v7TnNEBy3tI



Top of the page Bottom of the page
wizard
Posted 2018-08-12 9:43 AM (#568294 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish



Board Moderator & Exner Expert 10K+

Posts: 13042
500050002000100025
Location: Southern Sweden - Sturkö island
We use to say "Autosol is good for anything but chrome"

Joke aside, I wouldn't use it on new chrome due to the abrasive ingredients, but it's great on old worn parts.


Since that the Autosol dissolves verdigree, I suspect that there is a form of acid as ingredient, hence, once polished, the parts should be cleaned and waxed…..
Top of the page Bottom of the page
56D500boy
Posted 2018-08-12 10:14 AM (#568295 - in reply to #568294)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
finsruskw - 2018-08-12 8:08 AM
I think any old Turtle wax or similar type chrome polish would have done the same thing.


I did try a couple of Mother's chrome/metal cleaning/polishing products first but they didn't work half as well as the Autosol did.

I would use QuickGlo if I could buy it in a store.

I hear you (those with negative things to say about Autosol) and will only use it to clean the chrome. Then I will follow it with some chrome polish (or order some QuickGlo).

Thanks for the comments.

Top of the page Bottom of the page
60 dart
Posted 2018-08-12 11:33 PM (#568332 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 8947
50002000100050010010010010025
Location: WHEELING,WV.>>>HOME OF WWVA
turtle wax chrome polish and cleaner really works well with little effort . works on stainless really well also------------------------------------------------------------later
Top of the page Bottom of the page
56D500boy
Posted 2018-08-19 9:26 PM (#568662 - in reply to #568295)
Subject: Re: The "miracle" of AutoSol metal polish



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
56D500boy - 2018-08-12 10:14 AM

I would use QuickGlo if I could buy it in a store.
I hear you (those with negative things to say about Autosol) and will only use it to clean the chrome. Then I will follow it with some chrome polish (or order some QuickGlo).
:)


I just ordered a jar each of Quick Glo "original" and "fine". Shipping was cheap and fast.

We'll see.

Top of the page Bottom of the page
56D500boy
Posted 2018-08-29 12:43 AM (#569196 - in reply to #568662)
Subject: First Go with Quick Glo



Expert 5K+

Posts: 9855
5000200020005001001001002525
Location: Lower Mainland BC
56D500boy - 2018-08-19 9:26 PM
56D500boy - 2018-08-12 10:14 AM

I would use QuickGlo if I could buy it in a store.
I hear you (those with negative things to say about Autosol) and will only use it to clean the chrome. Then I will follow it with some chrome polish (or order some QuickGlo).
:)


I just ordered a jar each of Quick Glo "original" and "fine". Shipping was cheap and fast.
We'll see.


Quick Glo came in on Friday but I couldn't get down to Point Roberts WA to pick it up until today.

I gave it a quick go on the left rear passenger door vent window which was not as bad as the right rear door's vent window.

Very easy to use. Dab a bit on a paper towel and start wiping (applying pressure) and the rust and whatever quickly starts to disappear.

The Quick Glo product is a lot wetter than I expected but it was also very easy to use. If it works like they say, i.e. cleaning the rust off and then sealing the small pits/pores in the chrome, it could be winner.

You can see in the photos below where I've used it and not used it (when the photo was taken). All shiny now.





Edited by 56D500boy 2018-08-29 12:21 PM




(QuickGloOriginal.jpg)



(FirstGoWithQuickGloOriginal_1.jpg)



(FirstGoWithQuickGloOriginal_2.jpg)



Attachments
----------------
Attachments QuickGloOriginal.jpg (121KB - 149 downloads)
Attachments FirstGoWithQuickGloOriginal_1.jpg (188KB - 149 downloads)
Attachments FirstGoWithQuickGloOriginal_2.jpg (127KB - 145 downloads)
Top of the page Bottom of the page
plymouth
Posted 2018-08-29 7:17 AM (#569208 - in reply to #569196)
Subject: Re: The "miracle" of AutoSol metal polish



Expert

Posts: 2264
20001001002525
Location: McComb, Mississippi
I've used it and had fantastic results. I'll have to go through my camera and find the before and after pictures.
Top of the page Bottom of the page
jboymechanic
Posted 2018-08-29 11:48 AM (#569215 - in reply to #568247)
Subject: Re: The "miracle" of AutoSol metal polish



Expert

Posts: 2196
2000100252525
Location: Muskego, WI
Going back to the storage conditions, heating air does not remove moisture. The true measure of the amount of moisture in air is dew point. Air conditioning (cooling air) does remove moisture as the air cools it can hold less moisture and it drops out as condensation. Heating air from say, 40 degrees to 70 degrees, doesn't change the dew point of that air, but it will decrease the Relative Humidity as warmer air can carry more moisture. However, since cold air is drawn into the heating system from outside, the dew point should be low and the air dry anyway.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)