The Forward Look Network | ||
| ||
57 Chrysler drums Moderators: Ray Bell Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Local Regions -> Australia & New Zealand Region | Message format |
DejaVu |
| ||
Member Posts: 31 Location: South Australia | Hi all, I've had a 57 New Yorker coupe in the shed for some time doing nothing and I'd like to sort out the front brakes. From what I have been able to find out is that it appears to have 60' drums on 57' spindles and without a certain amount of dodgy spacers, the drums seat on too far and rub. I would like to remedy this. So I figure I can go and do the whole disc conversion thing (ouch for freight) or I can try to maintain originality (might be nice). In any case, before I shop USA, I need to ask if anyone in Oz has some serviceable front drums (with hubs) lying around that they would be interested in selling? From my meagre understanding of the interchange manual, it looks like any Chrysler & Desoto (56-58) or Dodge (57-58) with 12" brakes should be compatible. Thanks in advance for any help. Cheers, Ian | ||
56D500boy |
| ||
Expert 5K+ Posts: 9855 Location: Lower Mainland BC | DejaVu - 2018-08-14 7:34 AM Hi all, I've had a 57 New Yorker coupe in the shed for some time doing nothing and I'd like to sort out the front brakes. From my meager understanding of the interchange manual, it looks like any Chrysler & Desoto (56-58) or Dodge (57-58) with 12" brakes should be compatible. 1957 Chryslers were C75s or C76s. On that basis, I believe that the front brake drum (and hub) PN is 1732 293, as shown below. While that PN does cross to other Mopar makes, it only crosses into 57 and 58, not 1956. My parts pdf only goes 1955 to 1958 but on that basis, from what I see below, the 1732 293 12" drum applies to the following: LP2 = 58 Plymouth (Fury??) S27 = 57 Desoto Firesweep LS1 = 58 Desoto Firesweep LC1 = 58 Windsor C75 = 57 Windsor/Saratoga C76 = 57 New Yorker - like yours LC2 = 58 Saratoga LC3 = 58 New Yorker Hopefully somebody with a parts book that goes beyond 1958 will be able to post up what later models used the 1732 293 drum, etc. Edited by 56D500boy 2018-08-14 11:12 AM (57ChryslerBrakeDrumPN1732293.jpg) Attachments ---------------- 57ChryslerBrakeDrumPN1732293.jpg (219KB - 241 downloads) | ||
Powerflite |
| ||
Expert 5K+ Posts: 9605 Location: So. Cal | '58 Windsors and '57-'58 Firesweeps didn't get 12" brakes. They got 11" brakes. Maybe that was an available upgrade for them? Unless you are talking about Canadian or other export Windsors & Firesweeps, which may be large wheel base cars. Realistically, you are looking for parts from a '57-'58 large wheelbase Chyrsler/DeSoto. I had thought that '59 was the same too, but not sure. I'm sure John at BigM has these for sale. Edited by Powerflite 2018-08-14 5:59 PM | ||
DejaVu |
| ||
Member Posts: 31 Location: South Australia | Thanks for the replies gentlemen, very informative - I only really looked at the interchange.Yes I would've thought 59 was the same too but it doesn't seem clear but that model range should provide enough salvage options. I may just have to suck it up and ship em' out. Thanks again for your assistance | ||
desotogeorge |
| ||
Veteran Posts: 281 | Ian, I might have some 12 inch drums around the place somewhere. I suggest emailing me georgelaurie@bigpond.com I could have a few bits and pieces for your 57, George. | ||
coupeman |
| ||
Extreme Veteran Posts: 390 Location: Brisbane | If your not sorted i probably have what you need | ||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |