![]() | ||
The Forward Look Network | ||
| ||
![]() Jump to page : 1 Now viewing page 1 [50 messages per page] | View previous thread :: View next thread |
Forward Look Swap Meet -> Wanted - All Wanted Ads | Message format |
Beltran![]() |
| ||
Expert Posts: 1717 ![]() ![]() ![]() ![]() Location: Michigan | Anyone have a 55-56 Chrysler Idler Arm mount they are willing to part with? Mine failed... during cruise week here in Michigan... (IMG_4029.jpg) (IMG_4030.jpg) (IMG_4032.jpg) Attachments ---------------- ![]() ![]() ![]() | ||
| |||
wildone770![]() |
| ||
Veteran Posts: 264 ![]() ![]() ![]() ![]() Location: phoenix az | HI I HAVE THIS IN AZ COMPLETE WITH IDLER. DON 602 6899414 | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 11794 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | Attention, something is not correct as for the steering linkage, which seems to caused a wiggling motion on the mount. Check for bent steering linkage components first of all. Once you get a replacement, mount the 2 lower bolts finger tight and leave the upper bolt loose. Have a helper turning the steering Wheel fully to the left and right while you check the eventual movement of the mount. You might have to add some shims for to find the position where the mount moves very little or not at all. | ||
| |||
coronetx2![]() |
| ||
Veteran Posts: 188 ![]() ![]() ![]() ![]() Location: Mid Michigan | Hey I have one off a 56 dodge coronet if it will work You can have it for free I live about 75 mile north of you Let me know Phil | ||
| |||
56D500boy![]() |
| ||
Expert Posts: 4244 ![]() ![]() ![]() ![]() ![]() Location: Lower Mainland BC | coronetx2 - 2018-08-16 5:21 AM Hey I have one off a 56 dodge coronet if it will work The 55-56 Plymouth and Dodge V8 idler arms had one bracket PN (1611 211) and the 55-56 Desoto and Chrysler V8 idler arms had another bracket PN (1556 306) so the Coronet bracket probably wouldn't work. Edited by 56D500boy 2018-08-16 9:54 AM (1955-56IdlerArmBracketPNs.jpg) Attachments ---------------- ![]() | ||
| |||
Beltran![]() |
| ||
Expert Posts: 1717 ![]() ![]() ![]() ![]() Location: Michigan | My neighbor came through for me.. see pictures showing my prep work and his Tig welding... (NSMJ0290.JPG) (YGIM0151.JPG) (IMG_4035.JPG) Attachments ---------------- ![]() ![]() ![]() | ||
| |||
Beltran![]() |
| ||
Expert Posts: 1717 ![]() ![]() ![]() ![]() Location: Michigan | note the structural I-Beam enhancement to the part... we will not be failing again. | ||
| |||
Beltran![]() |
| ||
Expert Posts: 1717 ![]() ![]() ![]() ![]() Location: Michigan | I will look into your suggestions Wizard. Thanks. | ||
| |||
wizard![]() |
| ||
Board Moderator & Exner Expert 10K+ Posts: 11794 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Southern Sweden - Sturkö island | Good repair - it will hold, but I'd be looking for a new one | ||
| |||
Jump to page : 1 Now viewing page 1 [50 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
(Delete all cookies set by this site) | |