The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Mopar breathers for Big Block
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Engine, Exhaust, Fuel and IgnitionMessage format
 
1coolbanana
Posted 2018-08-21 11:52 PM (#568817)
Subject: Mopar breathers for Big Block


Veteran

Posts: 163
1002525
Location: Sydney

Hi all
Just wondering if generic Ford twist type breather and PCV fit the Mopar covers

 

I cant seem to source breathers and PCV here in Australia to fit the Mopar twist bayonet fitting and have bee told they are the same fit as Ford twist type.

Can anyone confirm this please?

Are there any other alternatives to setup a breather and PCV?

TIA

 

 

 

Top of the page Bottom of the page
mikes2nd
Posted 2018-08-22 12:23 AM (#568818 - in reply to #568817)
Subject: Re: Mopar breathers for Big Block


Expert

Posts: 3132
2000100010025
theres 100's of breathers, pcv, vacuum pumps... catch cans...

i think most breathers are by size.

Mine is in the valley cover since its a hemi. The hemi originally used the downdraft tube with the fill pipe with a breather cap there.

Im moving to an pcv valve and breather valve on the valley pan. Since its a new rebuild I assume its big enough to move the air out.
Top of the page Bottom of the page
1coolbanana
Posted 2018-08-22 1:16 AM (#568820 - in reply to #568817)
Subject: Re: Mopar breathers for Big Block


Veteran

Posts: 163
1002525
Location: Sydney
G'day
Sorry, I wasnt clear

Im just after confirmation of what other twist type caps are compatible with the above Mopar valve covers?

Mopar stuff is scarce here and Im looking for caps to go on these covers without importing.
Some have suggested that any twist on type cap, such as Ford ones, will fit.

Does anyone know if this is the case as Ive contacted a heap of shops here and none can confirm what fits a Mopar valve cover as in the pic.

Cheers
Top of the page Bottom of the page
mikes2nd
Posted 2018-08-22 2:13 PM (#568845 - in reply to #568817)
Subject: Re: Mopar breathers for Big Block


Expert

Posts: 3132
2000100010025

youll pretty much need the diameter and use that...

i would highly doubt any one has a compatiblity part chart for valve covers youll need the twist on type...

i would expect "most" to fit as they are one size "kind" of fits all.

https://www.jegs.com/webapp/wcs/stores/servlet/SearchResultsPageCmd?Ntt=valve+cover+breathers+twist&requestYear=&storeId=10001&catalogId=10002&langId=-1&year=&make=&model=&submodel=&engine=&Nrpp=&No=&persistYmm=false



Edited by mikes2nd 2018-08-22 2:15 PM
Top of the page Bottom of the page
Stroller
Posted 2018-10-26 1:39 PM (#572409 - in reply to #568817)
Subject: Re: Mopar breathers for Big Block


Regular

Posts: 88
252525
I have a '65 383 emissoins were not a tough back then. Breather on the drivers side valve cover is a pop type the other side is more part of the valve cover.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)