The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1959 Chrysler Cruise Control Throttle Pedal Linkage
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look NON-Technical Discussions -> 1955-1961 Forward Look MoPar General DiscussionMessage format
Posted 2018-08-23 12:31 PM (#568902)
Subject: 1959 Chrysler Cruise Control Throttle Pedal Linkage


Posts: 14

I just acquire some cruise control parts which came off a confirmed 1959 Chrysler.

Here is the gas pedal throttle linkage assembly. The orange section is a piece cut out of the floor of the car so it is clear how it was installed & how it operates.

I assume one of the holes in the hook section would be for the cruise control rod (Auto Pilot Link) connecting directly to the Servo (Auto Pilot) & the other hole would be for the linkage to the carburetor. Am I correct?

Can anyone shed more light on this, or have some additional pics to assist?

In my last two pics, I also have another hook assembly, although it's incomplete, probably rusted away. Anyway, it has a slightly different shape so I assume it is for a 1958 or perhaps a 1960 Chrysler or,... possibly its relative to an Imperial cruise set-up. Anyone have any ideas about this one?

Anyone with literature relative to 1958 &/or 1959 cruise control? Could you post it or send to me?

Thanks, appreciate any assistance/clarification

Edited by Pins61 2018-08-23 1:58 PM







Attachments DSC04368.jpg (138KB - 19 downloads)
Attachments DSC00691.jpg (39KB - 21 downloads)
Attachments DSC00688.JPG (38KB - 19 downloads)
Attachments DSC00700.jpg (38KB - 22 downloads)
Attachments DSC00710.jpg (41KB - 23 downloads)
Attachments DSC00709.jpg (45KB - 19 downloads)
Top of the page Bottom of the page
Posted 2018-08-23 2:17 PM (#568907 - in reply to #568902)
Subject: RE: 1959 Chrysler Cruise Control Throttle Pedal Linkage


Posts: 4355
Location: Lower Mainland BC
The bit that is clamped on to the accelerator pedal "hook" must be for the cruise control. You might want to look through my accelerator pedal thread. Presumably the part you are looking for is in the list of 1958 (?) Chrysler Automatic Pilot parts (see below):

Showing the throttle rod connection to a non-cruise control gas pedal "hook":

Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)