The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1963 imperial carrier bearing
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
Fick4fun
Posted 2018-08-23 3:47 PM (#568914)
Subject: 1963 imperial carrier bearing


Veteran

Posts: 135
10025
Does anybody know where or how to get a new carrier bearing for a 1963 imperial any help would great thanks
Top of the page Bottom of the page
Shep
Posted 2018-08-23 5:33 PM (#568919 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing



Expert

Posts: 3393
20001000100100100252525
Location: Chestertown, NY ( near Lake George)
Center driveshaft support bearing? If so, Rockauto shows one.

Edited by Shep 2018-08-23 5:37 PM
Top of the page Bottom of the page
Fick4fun
Posted 2018-08-23 6:30 PM (#568923 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing


Veteran

Posts: 135
10025
They have the bearing but it a wjole assembly.
Top of the page Bottom of the page
Shep
Posted 2018-08-23 7:12 PM (#568928 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing



Expert

Posts: 3393
20001000100100100252525
Location: Chestertown, NY ( near Lake George)
I don't think anyone makes that new. The rubber hanger rotted or broke?
Top of the page Bottom of the page
Fick4fun
Posted 2018-08-23 7:23 PM (#568929 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing


Veteran

Posts: 135
10025
It is starting to shake prety bad of the line but if you start slow its fine but it is getting worse and it is the oringnal and sat for a long time. I think it is seperating id have yo crawl under and look closely
Top of the page Bottom of the page
plymouth
Posted 2018-08-24 6:46 AM (#568943 - in reply to #568929)
Subject: Re: 1963 imperial carrier bearing



Expert

Posts: 2264
20001001002525
Location: McComb, Mississippi
Damper Doctor rebuilds these. I had mine revulcanized and a new bearing installed.
Top of the page Bottom of the page
57chizler
Posted 2018-08-24 11:54 AM (#568952 - in reply to #568914)
Subject: RE: 1963 imperial carrier bearing



Expert

Posts: 3768
200010005001001002525
Location: NorCal

https://damperdoctor.com/index.php?route=information/information&inf...
Top of the page Bottom of the page
Fick4fun
Posted 2018-08-24 7:04 PM (#568967 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing


Veteran

Posts: 135
10025
How long does it last after he fixes them.
Top of the page Bottom of the page
plymouth
Posted 2018-08-24 8:37 PM (#568970 - in reply to #568967)
Subject: Re: 1963 imperial carrier bearing



Expert

Posts: 2264
20001001002525
Location: McComb, Mississippi
Probably longer than 50 years.
Top of the page Bottom of the page
Fick4fun
Posted 2018-08-24 10:37 PM (#568976 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing


Veteran

Posts: 135
10025
I think its needs ro be fixed its in 2 peices

Edited by Fick4fun 2018-08-24 10:39 PM
Top of the page Bottom of the page
plymouth
Posted 2018-08-25 7:08 AM (#568995 - in reply to #568976)
Subject: Re: 1963 imperial carrier bearing



Expert

Posts: 2264
20001001002525
Location: McComb, Mississippi
Yep, that's a problem. Damper Doctor can fix it. They are pricey, but the quality and turn around time is fantastic. If you're driving this car quite a bit, I'd suggest pulling the crank pulley( held on by 5 bolts I believe, and have them revulcanize that rubber too. It happened to me. First was the driveshaft support, then about two weeks later the pulley failed.

Edited by plymouth 2018-08-25 7:09 AM
Top of the page Bottom of the page
Coronet_Jeff
Posted 2018-11-08 7:46 AM (#573163 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing


Regular

Posts: 75
252525
They are reproduced and available on eBay if you don't want to wait for the turn around.
Top of the page Bottom of the page
StillOutThere
Posted 2018-11-08 10:18 AM (#573168 - in reply to #568914)
Subject: Re: 1963 imperial carrier bearing



2000100010010025
Location: Under the X in Texas
Then and Now has been making these for a couple of years. Have one in my '56 Imperial. Perfect, reasonable. Not on the net page but call them. http://www.then-now-auto.com/nors-vulcanized-motor-mounts-rubber-pr...
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)