The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Imperial questions
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
plymouth
Posted 2018-08-26 2:29 PM (#569056)
Subject: Imperial questions



Expert

Posts: 2194
2000100252525
Location: McComb, Mississippi
Particularly on early 60s Imperials. I am needing information and possibly photos of weatherstripping in a few different areas and also where to buy some of these pieces. Along the roof rail, is there an end piece for the roof rail weatherstrip that goes above the vent Wing windows? When I received my car, a lot of the original weather stripping was gone so I ran one piece of roof rail weatherstrip from front to back. I noticed on some other cars, it appears that there is an end piece that I do not have. Are new vent wing seals available? If so, where? the rear doors appear to have some molded pieces of weather stripping. Are those available?. Lastly, r new seals available for the air conditioning evaporator box fresh air door? The weather stripping was very brittle and cracked on mine so I just sealed up the box temporarily. Any information is very much appreciated and photos also are a big help.
Top of the page Bottom of the page
plymouth
Posted 2018-08-29 7:25 AM (#569209 - in reply to #569056)
Subject: Re: Imperial questions



Expert

Posts: 2194
2000100252525
Location: McComb, Mississippi
Bump
Top of the page Bottom of the page
imopar380
Posted 2018-08-29 10:38 PM (#569244 - in reply to #569056)
Subject: Re: Imperial questions



Expert 5K+

Posts: 6776
50001000500100100252525
Location: Victoria, BC, on Vancouver Island, Canada
Gary Goers has / had most of the stuff but he may not be able to supply much any more with his health issues.
Top of the page Bottom of the page
plymouth
Posted 2018-08-30 10:19 PM (#569297 - in reply to #569056)
Subject: Re: Imperial questions



Expert

Posts: 2194
2000100252525
Location: McComb, Mississippi
I will send an order in to Gary. If he is not able to supply the parts that I need, is there any other source? My vent Wing weatherstripping is good, but it looks like it has shrink over time. Is there any way to rejuvenate these molded pieces? Thank you again
Top of the page Bottom of the page
mikes2nd
Posted 2018-08-31 9:48 AM (#569312 - in reply to #569056)
Subject: Re: Imperial questions


Expert

Posts: 3132
2000100010025
gummi pfledge works well. reconditions the rubber.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)