The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

Parting 55 belvedere 4 dr
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Parts Cars - VEHICLES BEING PARTED OUTMessage format
 
Apollo 61
Posted 2018-09-11 8:37 PM (#569983)
Subject: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Parting out 55 Plymouth 4 dr with poly motor auto trans red with/black int. radio, motor is froze, sheet metal/grille/bumpers are all decent.



(image.jpg)



(image.jpg)



(image.jpg)



(image.jpg)



Attachments
----------------
Attachments image.jpg (185KB - 607 downloads)
Attachments image.jpg (236KB - 608 downloads)
Attachments image.jpg (186KB - 597 downloads)
Attachments image.jpg (205KB - 613 downloads)
Top of the page Bottom of the page
Francois
Posted 2018-10-13 5:05 AM (#571594 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr


New User

Posts: 1

Hi,
I really hope that you can assist me, I need a cam shaft for my 1955 Plymouth Belvedere. Mine is beyond repair. I would appreaciate any assistance. Imstuck between a rock and a hard place.

Regards

Francois
Top of the page Bottom of the page
Apollo 61
Posted 2018-11-07 11:32 AM (#573113 - in reply to #571594)
Subject: RE: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Front window trim pics as requested.



Attachments
----------------
Attachments image.jpeg (220KB - 598 downloads)
Attachments image.jpeg (232KB - 577 downloads)
Attachments image.jpeg (220KB - 596 downloads)
Top of the page Bottom of the page
Stroller
Posted 2018-11-18 11:25 AM (#573701 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Extreme Veteran

Posts: 371
1001001002525
What do you want for the turn signal arm?
Top of the page Bottom of the page
mstrug
Posted 2018-11-18 8:07 PM (#573756 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr



Expert 5K+

Posts: 6487
50001000100100100100252525
Location: Newark, Texas (Fort Worth)
camshaft; https://www.kanter.com/productdetail.aspx?DeptNo=1400&MakeName=Plymo...

https://www.camcraftcams.com/

Edited by mstrug 2018-11-18 8:10 PM
Top of the page Bottom of the page
Apollo 61
Posted 2018-11-18 11:02 PM (#573764 - in reply to #573701)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Stroller - 2018-11-18 11:25 AM

What do you want for the turn signal arm?
. $15 + shipping
Top of the page Bottom of the page
'55 Savoy
Posted 2020-03-30 5:59 PM (#596254 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr



Member

Posts: 14

hello, do you still have the right grill piece? or the powerflite emblem on the trunk? please let me know if available and prices, thanks, Dave
Top of the page Bottom of the page
'55 Savoy
Posted 2020-03-30 6:01 PM (#596256 - in reply to #596254)
Subject: RE: Parting 55 belvedere 4 dr



Member

Posts: 14

also looking for the interior finish pieces between the door and windshield/dash.
Top of the page Bottom of the page
Apollo 61
Posted 2020-04-06 3:30 AM (#596491 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Haven't checked in here in awhile. Missed your post. Yes,I have the pass grille section and it is very good condition. Also the powerflite emblem. Send me a pm if you get the message
Top of the page Bottom of the page
westaus29
Posted 2020-04-06 8:38 PM (#596527 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Veteran

Posts: 147
10025
Location: Mandurah, Western Australia
Do you have RH front window winder mechanism - passengers side in USA, drivers side in Oz?
Top of the page Bottom of the page
Apollo 61
Posted 2020-04-08 11:48 PM (#596615 - in reply to #596527)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
westaus29 - 2020-04-06 8:38 PM

Do you have RH front window winder mechanism - passengers side in USA, drivers side in Oz?


Yes, I have the pass front window and it functions well. $40 plus shipping.
Sorry I don't have paypal.
Top of the page Bottom of the page
carman72
Posted 2020-04-18 7:35 PM (#597058 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Member

Posts: 20

How are the windshield wiper arms. Are the springs broken if not i would be intrested in buying them.
Top of the page Bottom of the page
Apollo 61
Posted 2020-04-20 12:03 AM (#597101 - in reply to #597058)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
carman72 - 2020-04-18 7:35 PM

How are the windshield wiper arms. Are the springs broken if not i would be intrested in buying them.


The wiper arms look really good. $25 + shipping. Are you asking about the rear leaf springs?
Top of the page Bottom of the page
carman72
Posted 2020-04-24 6:06 PM (#597301 - in reply to #597101)
Subject: Re: Parting 55 belvedere 4 dr


Member

Posts: 20

No i meant the springs in the wiper arms. Sorry about the confusion.
Top of the page Bottom of the page
samstrader
Posted 2020-05-02 3:02 PM (#597650 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Extreme Veteran

Posts: 443
10010010010025
Location: Beaumont TX
Hi Apollo 61. Thanks for letting me know about your parts car. I need a lot of parts so may take me a while to make the full list.

1. Engine - I need a rocker arm assembly, with all the rockers and all the push rods that go with that rocker assembly....
2. Car Interior - Do you have the dome light lens (COVER).
3. There is a small part of the trim for the back windshield surround in the driver side corner. It's the 90 degree part. I need just that. You may not want to see just a part and I understand this but if so, I'm interested.
4. Do you have the fuel pump and do you think it is rebuidable?
5. There is more but will take time for me to figure it all out.

Thanks for your post. Very helpful to me...

Sam
Top of the page Bottom of the page
Apollo 61
Posted 2020-05-03 10:02 PM (#597729 - in reply to #597650)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Dome lens is gone.
The trim your asking about? Interior or exterior? The interior trim is gone,but the exterior is there and I would separate.
The original fuel pump is there with original uncut fuel line attached.
Looks to be serviceable pump. Maybe someone here knows?
Maybe you can get a new one?
I pulled valve covers and rockers and push rods look real good.
The valve covers are in very good condition

Edited by Apollo 61 2020-05-03 10:13 PM
Top of the page Bottom of the page
Steve1956
Posted 2020-05-04 1:22 AM (#597735 - in reply to #597729)
Subject: Re: Parting 55 belvedere 4 dr


Regular

Posts: 79
252525
Hi Apollo61. I am looking for a LH side Tailpipe support bracket for a 1956 Custom Royal Sedan. I have a photo of the RHS, and want a matching one for the LHS. Would this be the same on the 55 Belvedere? Thanks, Steve

Edited by Steve1956 2020-05-04 1:29 AM




(Tail Pipe Bracket RHS but LHS needed.JPG)



Attachments
----------------
Attachments Tail Pipe Bracket RHS but LHS needed.JPG (10KB - 455 downloads)
Top of the page Bottom of the page
Apollo 61
Posted 2020-05-06 1:25 AM (#597846 - in reply to #597735)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Steve1956 - 2020-05-04 1:22 AM

Hi Apollo61. I am looking for a LH side Tailpipe support bracket for a 1956 Custom Royal Sedan. I have a photo of the RHS, and want a matching one for the LHS. Would this be the same on the 55 Belvedere? Thanks, Steve


Sorry it's single exhaust.
Top of the page Bottom of the page
56D500boy
Posted 2020-05-06 2:14 AM (#597849 - in reply to #597650)
Subject: Re: Parting 55 belvedere 4 dr



Expert 5K+

Posts: 9854
5000200020005001001001002525
Location: Lower Mainland BC
samstrader - 2020-05-02 12:02 PM
2. Car Interior - Do you have the dome light lens (COVER).
Sam


Sam: Now that you have the 55-58 Parts catalogue, you could do a Ctrl F search on "dome" and get to section 8-05-23 where you will find the PN for the lens as 1593 550. Then you can google "1593550 dome light lens" which will find you several options including one that is new old stock:

https://www.google.com/search?source=univ&tbm=isch&q=1593550+dome+li...







Edited by 56D500boy 2020-05-06 2:15 AM
Top of the page Bottom of the page
samstrader
Posted 2020-05-06 2:14 AM (#597850 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr


Extreme Veteran

Posts: 443
10010010010025
Location: Beaumont TX
Thanks Apollo... I'll PM you about the parts from the engine. I'm sorry to be so late with this reply. Just found your note.
Top of the page Bottom of the page
samstrader
Posted 2020-05-06 2:16 AM (#597851 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Extreme Veteran

Posts: 443
10010010010025
Location: Beaumont TX
Thanks 56D500Boy... This is amazing. I'm going to buy it now.

I'll send you a PM about the other parts.
Top of the page Bottom of the page
samstrader
Posted 2020-05-10 3:28 PM (#598049 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr


Extreme Veteran

Posts: 443
10010010010025
Location: Beaumont TX
Hello Apollo 61. Here's a picture of the back window trim part I need. This picture is from the passenger side. I need the trim part for the driver side.




(trim piece2.png)



Attachments
----------------
Attachments trim piece2.png (148KB - 449 downloads)
Top of the page Bottom of the page
Apollo 61
Posted 2020-05-10 11:15 PM (#598067 - in reply to #598049)
Subject: RE: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
I think 2dr is different than 4dr? I don't see that trim on this 55. Here's a pic?

Edited by Apollo 61 2020-05-10 11:19 PM




Attachments
----------------
Attachments image.jpeg (205KB - 458 downloads)
Top of the page Bottom of the page
samstrader
Posted 2020-05-11 3:30 AM (#598073 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Extreme Veteran

Posts: 443
10010010010025
Location: Beaumont TX
You are correct. That's different. This must be a much higher end car than mine. I don't have that big piece of trim.

Thanks for the picture. I can't use this part.
Top of the page Bottom of the page
westaus29
Posted 2020-05-13 10:08 AM (#598189 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Veteran

Posts: 147
10025
Location: Mandurah, Western Australia
PM sent re window winder
Top of the page Bottom of the page
Carole
Posted 2020-08-10 11:21 PM (#601907 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr


New User

Posts: 4

Any wheels? Charlie 301-346-6548
Top of the page Bottom of the page
westaus29
Posted 2020-08-11 6:31 AM (#601918 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr


Veteran

Posts: 147
10025
Location: Mandurah, Western Australia
Got window winder from big M thanks
Top of the page Bottom of the page
daveguilly
Posted 2022-01-22 7:23 PM (#618694 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr



Member

Posts: 13

Do you still have the transmission?
Top of the page Bottom of the page
daveguilly
Posted 2022-01-22 7:23 PM (#618695 - in reply to #569983)
Subject: RE: Parting 55 belvedere 4 dr



Member

Posts: 13

Do you still have the transmission?
Top of the page Bottom of the page
Apollo 61
Posted 2022-02-03 3:58 AM (#618991 - in reply to #569983)
Subject: Re: Parting 55 belvedere 4 dr



Elite Veteran

Posts: 765
5001001002525
Sorry I do not, I sold the car to big m auto.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

* * * This site contains affiliate links for which we may be compensated * * *


(Delete all cookies set by this site)