|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | Hi Guys , ive just bought a nice original survivor 59 Fireflite Coupe and ive just discovered now that I have the car that someone changed the carb .
The carb number I need for it is 2794s . That number is written down on the front ledge of the base just under where it bolts on .
The car was taken off the road decades go it seems as it has a faulty starter and never fixed . So I will try and repair it first and if not may be looking for one of these also . Ive seen high torque starters on ebay that say they suit 59-61 Chrysler , but the number they apparently suit MDT-6001 are for 59 firesweep which didn't have the starter on top originally . The new high torque starter does have a solenoid , but I didn't want to spend so much money unless someone may know if these will in fact fit right . The starter I need was originally number MDT-6002.
Thanks in advance . My shipping address is in Atlanta Georgia .
Here is a pic of the car
(046.JPG)
Attachments ---------------- 046.JPG (155KB - 74 downloads)
|
|
|
|
Regular
Posts: 73
| James, I have a 2794 carb in my pile. I know the shafts work. I will pull it out and report with a photo.
give me a day or so.
R
Edited by javasbux 2018-09-17 11:26 AM
|
|
|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | Sounds great thanks for that . |
|
|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | Still searching for one , this guy seems to have flaked on me . |
|
|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | Thanks again , I have found a correct carb thanks to a member here . It is missing a few pieces , so I would still buy another if anyone has one . |
|
|
|
Elite Veteran,, James Passed away March 2021, He will be Missed
Posts: 1028
Location: Melbourne, Australia | P.S Javasbux (his handle on this forum ) , his name is Ralph came good with the carb and it arrived today in as described condition . Thanks again Ralph |
|
|