The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1958 Imperial Flight sweep Deck Molding Joiner
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Swap Meet -> Wanted - All Wanted AdsMessage format
 
plymouthred
Posted 2018-09-20 7:44 AM (#570437)
Subject: 1958 Imperial Flight sweep Deck Molding Joiner


Member

Posts: 26
25
Location: Australia
Still looking for this part. Anyone got one please
Top of the page Bottom of the page
StillOutThere
Posted 2018-09-20 8:14 PM (#570474 - in reply to #570437)
Subject: Re: 1958 Imperial Flight sweep Deck Molding Joiner



2000500100100100100
Location: Under the X in Texas
I don't think they used one on the flitesweep deck lids. The Chrysler 300s did not. Trim "ring" just butts up to itself. My 300F did not have one and others I looked at did not either.
Top of the page Bottom of the page
56D500boy
Posted 2018-09-20 8:50 PM (#570477 - in reply to #570474)
Subject: Re: 1958 Imperial Flight sweep Deck Molding Joiner



Expert

Posts: 3689
20001000500100252525
Location: Lower Mainland BC
StillOutThere - 2018-09-20 8:14 PM
I don't think they used one on the flitesweep deck lids. The Chrysler 300s did not. Trim "ring" just butts up to itself. My 300F did not have one and others I looked at did not either.


Not trying to be contradictory but I see the word "moulding" in this list (but I don't know if that is metal or rubber):





(57-58ImperialBodyPartsDiagram.jpg)



(57-58ImperialDeckLidParts.jpg)



Attachments
----------------
Attachments 57-58ImperialBodyPartsDiagram.jpg (175KB - 14 downloads)
Attachments 57-58ImperialDeckLidParts.jpg (122KB - 13 downloads)
Top of the page Bottom of the page
KcImperial
Posted 2018-09-21 12:42 AM (#570489 - in reply to #570437)
Subject: RE: 1958 Imperial Flight sweep Deck Molding Joiner



Expert

Posts: 2415
2000100100100100
Location: Kansas City, KS
Here's a pic of what I believe Chris is asking for
That outer chrome ring will be the same on all 1957, 1958, and 1959 Imperials with Flitesweep deck lids




(1958-imperial-crown1.jpg)



Attachments
----------------
Attachments 1958-imperial-crown1.jpg (108KB - 16 downloads)
Top of the page Bottom of the page
56D500boy
Posted 2018-09-21 10:33 AM (#570504 - in reply to #570489)
Subject: RE: 1958 Imperial Flight sweep Deck Molding Joiner



Expert

Posts: 3689
20001000500100252525
Location: Lower Mainland BC
KcImperial - 2018-09-21 12:42 AM
Here's a pic of what I believe Chris is asking for
That outer chrome ring will be the same on all 1957, 1958, and 1959 Imperials with Flitesweep deck lids


So from the list I posted above, 1691 863?

Nothing at Collector's Auto Supply:

http://www.collectorsautosupply.com/customSearchServerSide.asp?boxe...





Edited by 56D500boy 2018-09-21 10:36 AM
Top of the page Bottom of the page
KcImperial
Posted 2018-09-21 2:49 PM (#570514 - in reply to #570504)
Subject: RE: 1958 Imperial Flight sweep Deck Molding Joiner



Expert

Posts: 2415
2000100100100100
Location: Kansas City, KS
56D500boy - 2018-09-21 9:33 AM
So from the list I posted above, 1691 863?

Nothing at Collector's Auto Supply:

http://www.collectorsautosupply.com/customSearchServerSide.asp?boxe...




No, that's the part number for the inner ring or insert.
1957 has a pie pan looking insert 1691 863
1958 has an inner ring 1860 767 and separate eagle emblem 1860 673
1959 had two different inner trims. (I do not have part numbers for these)
One is a combination of '58 pieces with an additional pie plate under the eagle
The other is a stamped one-piece unit similar to '57 but looks like other '59 design

The outer trim ring and joiner requested in this thread should be the same for all 3 years

This trunk trim is hard to find. I would never expect trim like any of the above to be sold at Collector Auto Supply
It would be surprising if even Frank Mitchell had this
Even finding used is a challenge as it's either missing, severely pitted or being sold with the whole deck lid
Top of the page Bottom of the page
oldwood
Posted 2018-09-22 10:45 PM (#570601 - in reply to #570437)
Subject: Re: 1958 Imperial Flight sweep Deck Molding Joiner


Expert

Posts: 2784
2000500100100252525
Location: little rock, AR
I have the piece he’s looking for and set a PM but but no one ever responded.
Top of the page Bottom of the page
plymouthred
Posted 2018-09-24 6:45 PM (#570718 - in reply to #570601)
Subject: Re: 1958 Imperial Flight sweep Deck Molding Joiner


Member

Posts: 26
25
Location: Australia
Oldwood

Can I have your Email please so I can arrange the purchase.
Top of the page Bottom of the page
oldwood
Posted 2018-09-26 4:53 PM (#570798 - in reply to #570437)
Subject: Re: 1958 Imperial Flight sweep Deck Molding Joiner


Expert

Posts: 2784
2000500100100252525
Location: little rock, AR
My computer is being fixed. Now I have to find where I put that piece.
Top of the page Bottom of the page
plymouthred
Posted 2018-09-27 7:27 AM (#570817 - in reply to #570798)
Subject: Re: 1958 Imperial Flight sweep Deck Molding Joiner


Member

Posts: 26
25
Location: Australia
oldwood - 2018-09-26 4:53 PM

My computer is being fixed. Now I have to find where I put that piece.




Let me know when you have it so I can arrange cash and shipping.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)