The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

GEARSHIFT CONTROL UNIT.
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Transmission and Rear AxleMessage format
 
swede59
Posted 2018-09-23 1:51 PM (#570623)
Subject: GEARSHIFT CONTROL UNIT.


Member

Posts: 11


CAN I RUN A TORQUE-FLITE ON A TWO SPEED CONTROL UNIT. ANY INPUT WOULD BE APPRECIATED
Top of the page Bottom of the page
wizard
Posted 2018-09-23 3:35 PM (#570628 - in reply to #570623)
Subject: Re: GEARSHIFT CONTROL UNIT.



Board Moderator & Exner Expert 10K+

Posts: 11688
500050001000500100252525
Location: Southern Sweden - Sturkö island
Hypothetically I'd say that it will be doable, but the PowerFlite pushbutton unit must be modified with the plates from a TorqueFlite pushbutton unit for to get the proper stroke ratios.

However, you will "loose" one gear, which could be the 1st gear that nearly ever is used.


The cable from the TF must of course be used
Top of the page Bottom of the page
swede59
Posted 2018-10-07 11:10 AM (#571260 - in reply to #570623)
Subject: Re: GEARSHIFT CONTROL UNIT.


Member

Posts: 11

thanks for your help , i have a control unit from a tree speed but it is corroded will try to clean it up or use parts from it.

thanks again from a fellow swede B.ANDERSSON
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)