The Forward Look Network
The Forward Look Network
Search | Statistics | User Listing Forums | Chat | eBay | Calendars | Albums | Skins | Language
You are logged in as a guest. ( logon | register )

1959 Dodge CR side molds
Jump to page : 1
Now viewing page 1 [50 messages per page]
View previous thread :: View next thread
   Forward Look Technical Discussions -> Body, Glass, Interior and TrimMessage format
 
lozrox58
Posted 2018-10-14 3:29 AM (#571658)
Subject: 1959 Dodge CR side molds



Veteran

Posts: 271
1001002525
Location: Newcastle Australia
Is the side trim on the Custom Royal supposed to be straight?
Both doors have been reskinned, so it is possible the holes have been placed in the wrong spot.
Nothing seems to be fitting as I would expect



(Side trim 1.jpg)



(Side trim 2.jpg)



Attachments
----------------
Attachments Side trim 1.jpg (102KB - 10 downloads)
Attachments Side trim 2.jpg (128KB - 13 downloads)
Top of the page Bottom of the page
Rebels-59
Posted 2018-10-14 5:26 PM (#571690 - in reply to #571658)
Subject: Re: 1959 Dodge CR side molds



Board Moderator & Exner Expert 10K+

500050002000100100252525
Location: .Norfolk..Mafia.. ,England UK
On the 2dr Coupe, and presuming the 4dr is the same,, The rear quarters have round holes for the Clips allowing No Adjustment for the Trim,, The Front Fender and Door has Square type holes for the Clips to fix, This allows a little up and down movement of the Trim once fitted for final alignment ,,
Top of the page Bottom of the page
Rebels-59
Posted 2018-10-14 5:30 PM (#571691 - in reply to #571690)
Subject: Re: 1959 Dodge CR side molds



Board Moderator & Exner Expert 10K+

500050002000100100252525
Location: .Norfolk..Mafia.. ,England UK
Rear Quarter Round Holes for Trim Clips.



(46.jpg)



Attachments
----------------
Attachments 46.jpg (97KB - 10 downloads)
Top of the page Bottom of the page
Rebels-59
Posted 2018-10-14 5:31 PM (#571692 - in reply to #571691)
Subject: Re: 1959 Dodge CR side molds



Board Moderator & Exner Expert 10K+

500050002000100100252525
Location: .Norfolk..Mafia.. ,England UK
Door and Front Fender Square Holes ..



(54.jpg)



Attachments
----------------
Attachments 54.jpg (95KB - 12 downloads)
Top of the page Bottom of the page
lozrox58
Posted 2018-10-14 6:42 PM (#571694 - in reply to #571658)
Subject: Re: 1959 Dodge CR side molds



Veteran

Posts: 271
1001002525
Location: Newcastle Australia
All the holes in mine are round. But many have been drilled by me. If I follow the line of the mold on the rear quarter, then I can get a straight line rising from bumper to the B pillar by about 15mm. And then falling back to the front guard. essentially the mold is higher in the middle.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [50 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread



(Delete all cookies set by this site)